Hanging Platform - Combisafe

More documents

Recommendations

Info

AssemblyCombisafe Hanging PlatformCheck that the roof truss is free from cracks and knots or other defects that mightaffect strength.1. Drill a 13 mm hole in the roof truss end as per the picture below. The dimensionsrefer to the distance from the hole to the edge of the roof truss. In thedirection of the grain this must be at least 120 mm, and the distance at rightangles to the grain must be at least 60 mm.4060120=602100_018[mm]Ø 1345-150Figure 23. Dimensional draft2. Place the Hanging Platform Clamp over the hole. The Hanging PlatformClamp can be placed in two different directions depending on which side ofthe roof truss you want to suspend the Hanging Platform Console, as well aswhere the support to the facade ends up.3. Attach the Hanging Platform Clamp using the M12x200 screw through thehole. Thread the M12 screw in the clamp screw's internal thread to the bottom.Check that the Hanging Platform Clamp is hanging plumb and tightensecurely.Figure 24. Placement of Hanging Platform Clamp28
Combisafe Hanging PlatformAssemblyKeyhole AttachmentMax c-c distance is 2.4 m.Take into consideration the loads from the Hanging Platform that affect the attachmentand the facade.1. Fit the Keyhole Attachment in the form of expander, and through thread supportor equivalent. See instructions from the expander manufacturer or equivalent.2. Fit the Keyhole Attachment on to the stud. The Keyhole Attachment is sizedto accept an M16 fixing.3. Check that the Keyhole Attachment is hanging plumb and tighten securely.Figure 25. Assembly of Keyhole Attachment29
Page 1: ®COMBISAFEHanging PlatformIncludin
Page 4 and 5: GeneralCombisafe Hanging PlatformGe
Page 6: Safety instructionsCombisafe Hangin
Page 9 and 10: Combisafe Hanging PlatformTechnical
Page 17 and 18: 2115_0022115_001Combisafe Hanging P
Page 25 and 26: 918Combisafe Hanging PlatformTechni
Page 27: 2130_001Combisafe Hanging PlatformA
Page 31 and 32: Combisafe Hanging PlatformAssemblyH
Page 33 and 34: Combisafe Hanging PlatformAssemblyA
Page 35 and 36: Combisafe Hanging PlatformAssemblyN
Page 37 and 38: Combisafe Hanging PlatformAssembly2
Page 39 and 40: Combisafe Hanging PlatformAssembly5
Page 41 and 42: Combisafe Hanging PlatformAssemblyS
Page 43 and 44: Combisafe Hanging PlatformAssemblyF
Page 45 and 46: 2350_002Combisafe Hanging PlatformA
Page 47 and 48: Combisafe Hanging PlatformInspectio
Page 49 and 50: Combisafe Hanging PlatformMaintenan
Page 52: ®COMBISAFECombisafe International

Hanging Platform - Combisafe

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?