Low Voltage Power and DC Circuit Breakers - GE Industrial Systems

Low Voltage Power and DC Circuit Breakers Section 6
WavePro Low Voltage Power Circuit Breakers
Step 9 Select Second Shunt Trip
If you selected a shunt trip in Step 5 and require another, select
your second shunt trip option. Transfer the product number digit
to the box marked Step 9 in the Product Number Line and the
price to the box marked Step 9 in the Price Column. Note: Second
shunt trip requires the selection of a 7-stage auxiliary switch in
Step 7.
Step 10 Select Additional Options
Select your combination of additional options. Transfer the product number digit to
the box marked Step 10 in the Product Number Line and the price to the box marked
Step 10 in the Price Column.
6-38
A-Disconnect 1
“PM Ready”
Voltage Product No. Digit
None
X
120V, 60 Hz 1
240V, 60 Hz 3
24Vdc B
110/125Vdc E
250Vdc F
Hidden Close
Push Button 2
BuyLog ® Catalog
Operation
Counter
Remote Charge
Indicator Product No. Digit
X (none)
A
B
C
D
E
F
G
H
J
K
L
1The 36-point A-Disconnect is automatically supplied if any of the following options were selected in
previous steps:
—zone selective interlock
—shunt trip
—auxiliary switch
—bell alarm
—undervoltage trip
—electrical lockout device
—electric charge and close
—MicroVersaTrip PM trip unit (”M” or “PM” option)
Select the A-Disconnect here only if (1) none of these options were selected in previous steps and
4-wire ground fault is required or (2) none of these options were selected in previous steps and your
WavePro breaker is to be “PM ready.” “PM ready” wiring includes inputs for 24V dc auxiliary power,
communications, and 3 phase voltage.
2Available only on breakers with electrical charge and close option.
www.geindustrial.com
Optional Hidden Close
button feature shown
Rev. 9/12
Prices and data subject
to change without notice