[MS-VDS]: Virtual Disk Service (VDS) Protocol Specification

Corresponding HBA_PORTSTATE value: HBA_PORTSTATE_BYPASSEDVDS_HPS_DIAGNOSTICS: The HBA port is in diagnostics mode.Corresponding HBA_PORTSTATE value: HBA_PORTSTATE_DIAGNOSTICSVDS_HPS_LINKDOWN: The HBA port link is down.Corresponding HBA_PORTSTATE value: HBA_PORTSTATE_LINKDOWNVDS_HPS_ERROR: The HBA port has an error.Corresponding HBA_PORTSTATE value: HBA_PORTSTATE_ERRORVDS_HPS_LOOPBACK: The HBA port is loopback.Corresponding HBA_PORTSTATE value: HBA_PORTSTATE_LOOPBACK2.2.2.4.1.3 VDS_HBAPORT_SPEED_FLAGThe VDS_HBAPORT_SPEED_FLAG enumeration type defines the set of valid flags for determiningthe speeds that an HBA port supports. These values are used in the ulPortSpeed member of theVDS_HBAPORT_PROP structure. These flags correspond to the HBA_PORTSPEED flags, as specifiedin [HBAAPI].typedef enum _VDS_HBAPORT_SPEED_FLAG{VDS_HSF_UNKNOWN = 0x00000000,VDS_HSF_1GBIT = 0x00000001,VDS_HSF_2GBIT = 0x00000002,VDS_HSF_10GBIT = 0x00000004,VDS_HSF_4GBIT = 0x00000008,VDS_HSF_NOT_NEGOTIATED = 0x00008000} VDS_HBAPORT_SPEED_FLAG;VDS_HSF_UNKNOWN: The HBA port speed is unknown.Corresponding HBA_PORTSPEED value: HBA_PORTSPEED_UNKNOWNVDS_HSF_1GBIT: The HBA port supports a transfer rate of 1 gigabit per second.Corresponding HBA_PORTSPEED value: HBA_PORTSPEED_1GBITVDS_HSF_2GBIT: The HBA port supports a transfer rate of 2 gigabits per second.Corresponding HBA_PORTSPEED value: HBA_PORTSPEED_2GBITVDS_HSF_10GBIT: The HBA port supports a transfer rate of 10 gigabits per second.Corresponding HBA_PORTSPEED value: HBA_PORTSPEED_10GBITVDS_HSF_4GBIT: The HBA port supports a transfer rate of 4 gigabits per second.Corresponding HBA_PORTSPEED value: HBA_PORTSPEED_4GBITVDS_HSF_NOT_NEGOTIATED: The HBA port speed has not been established.Corresponding HBA_PORTSPEED value: HBA_PORTSPEED_NOT_NEGOTIATED[MS-VDS] — v20110610Virtual Disk Service (VDS) Protocol SpecificationCopyright © 2011 Microsoft Corporation.Release: Friday, June 10, 201164 / 360