[MS-VDS]: Virtual Disk Service (VDS) Protocol Specification

Methods in RPC Opnum OrderMethodGetPropertiesSetAllPathStatusesDescriptionRetrieves the properties of the HBA port that is represented by the objectexposing this interface and method.Opnum: 3Sets the statuses of all paths that originate from the HBA port to a specifiedstatus.Opnum: 4All methods MUST NOT throw exceptions.3.1.7 Initiator Adapter Object InterfacesThis section includes interfaces that are used to interact with iSCSI initiator adapter objects on theserver.3.1.7.1 IVdsIscsiInitiatorAdapter InterfaceThe IVdsIscsiInitiatorAdapter interface provides methods to query and interact with iSCSIinitiator adapters on the server.The UUID for this interface is {B07FEDD4-1682-4440-9189-A39B55194DC5}.The IVdsIscsiInitiatorAdapter methods are specified in section 3.4.5.2.11. No methods are listedwith opnums 5 and 6 because the Virtual Disk Service Remote Protocol does not use them.Methods in RPC Opnum OrderMethodGetPropertiesQueryInitiatorPortalsOpnum05NotUsedOnWireOpnum06NotUsedOnWireDescriptionRetrieves the properties of the initiator adapter that is represented by theobject exposing this interface and method.Opnum: 3Returns an object that enumerates the iSCSI initiator portals of the initiatoradapter.Opnum: 4Reserved for local use.Opnum: 5Reserved for local use.Opnum: 6In the preceding table, the phrase "Reserved for local use" means that the client MUST NOT sendthe opnum, and the server behavior is undefined because it does not affect interoperability.All methods MUST NOT throw exceptions.[MS-VDS] — v20110610Virtual Disk Service (VDS) Protocol SpecificationCopyright © 2011 Microsoft Corporation.Release: Friday, June 10, 2011126 / 360