[MS-VDS]: Virtual Disk Service (VDS) Protocol Specification

Return value/code0x8004252EVDS_E_DUPLICATE_DISK0x8004252FVDS_E_LAST_VALID_DISK0x80042530VDS_E_INVALID_SECTOR_SIZE0x80042531VDS_E_ONE_EXTENT_PER_DISK0x80042532VDS_E_INVALID_BLOCK_SIZE0x80042533VDS_E_PLEX_SIZE_INVALID0x80042534VDS_E_NO_EXTENTS_FOR_PLEX0x80042535VDS_E_INVALID_PLEX_TYPE0x80042536VDS_E_INVALID_PLEX_BLOCK_SIZE0x80042537VDS_E_NO_HEALTHY_DISKS0x80042538VDS_E_CONFIG_LIMIT0x80042539VDS_E_DISK_CONFIGURATION_CORRUPTED0x8004253AVDS_E_DISK_CONFIGURATION_NOT_IN_SYNC0x8004253BVDS_E_DISK_CONFIGURATION_UPDATE_FAILED0x8004253CVDS_E_DISK_DYNAMIC0x8004253DVDS_E_DRIVER_OBJECT_NOT_FOUND0x8004253EVDS_E_PARTITION_NOT_CYLINDER_ALIGNED0x8004253FDescriptionThe same disk was specified more thanonce.The operation cannot be completedbecause there is only one valid disk inthe pack.All disks holding extents for a givenvolume must have the same sectorsize, and the sector size must be valid.A single disk cannot contribute tomultiple members or multiple plexes ofthe same volume.Neither the volume stripe size nor thedisk sector size was found to be nonzero.The size of the volume plex is invalid.No extents were found for the plex.The plex type is invalid.The plex block size must be non-zero.All of the disks involved in theoperation are either missing or failed.The Logical Disk Managementdatabase is full and no more volumesor disks may be configured.The disk configuration data iscorrupted.The disk configuration is not in syncwith the in-memory configuration.One or more disks failed to be updatedwith the new configuration.The disk is already dynamic.The object was not found in the drivercache.The disk layout contains partitionswhich are not cylinder aligned.The disk layout contains partitions101 / 360[MS-VDS] — v20110610Virtual Disk Service (VDS) Protocol SpecificationCopyright © 2011 Microsoft Corporation.Release: Friday, June 10, 2011