TTG-7000 operation manual - AvionTEq

SoftkeyFunctionRandom Start See menu control 2.Random Width See menu control 2.Figure 3.1.2.4.1.8 illustrates the RTCA/DO-260 Generator Definition Menu. This menu allows theoperator to specify the generator parameters for delay triggering.123489567Figure 3.1.2.4.1.8 – RTCA/DO-260 Generator Definition Menu for Delay TriggeringMenu Control Function1 Generator combobox allows selection of generator.2 Power numeric box allows setting the output power of the generator.3 Phase numeric box allows setting the output phase of the generator.4 Path combobox allows setting the path of the generator to top or bottom.5 Delay numeric box allows setting the delay from the trigger source. If the generatorthat is being set is the trigger source, this parameter is disabled. The delay value willbe either positive or negative in accordance with the setting in the timing definitionof delay+ or delay-. The range is from 0 to 120000 nanoseconds in 100 nanosecondsteps.6 Message Type combobox allows selecting between Mode S or ATCRBS message. Ifthe generator that is being set is the trigger source, this parameter is disabled and setto Mode S.TTG-7000 User’s Manual Page 4890-7000-0001 Rev E