13.07.2015 Views

TTG-7000 operation manual - AvionTEq

TTG-7000 operation manual - AvionTEq

TTG-7000 operation manual - AvionTEq

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Figure 3.1.2.4.1.5 illustrates the RTCA/DO-260 Special Test Bit Failures Definition Menu. This menuallows the operator to specify the start chip and the ending chip for energy on both sides of themanchester code, and also allows selections of bad bits (inverted after PI Calculation).123Figure 3.1.2.4.1.5 – RTCA/DO-260 Special Test Definition Bit Failures MenuMenu Control Function1 Special Test combobox allows setting type of special test (Normal, Altered Preamble,Bit Failures, Overlapping Pulse)2 Energy in Chips section allows setting the start and ending chip with energy on bothparts of the bit.3 Bad Chips selects the bits that will be inverted after the calculation of the PI FieldSoftkeyFunctionSpecial Test Same as menu control item 1.Bad Chips Energy Chips First BitEnergy Chips Last BitBad Chips First BitBad Chips Last BitSame as menu control item 2. Displays the softkeys tochange the bad chip parameters.<strong>TTG</strong>-<strong>7000</strong> User’s Manual Page 4590-<strong>7000</strong>-0001 Rev E

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!