TTG-7000 operation manual - AvionTEq

For example, user wants to change the IP of the Rear LAN from dynamic to static. Select the Rear LANline on the grid of the current menu and press the “Change Settings” Softkey.Figure 3.1.1.2.2 illustrates the TTG-7000 Network Connections Change Settings Menu. To change the IPaddress to a static IP select the “Use the following IP Address” group box. Enter the IP address, SubnetMask, and Gateway Address. Press the “Set” softkey and the IP address will be changed to a static IP.To change to a dynamic IP, select the “Obtain an IP Address automatically” group box and press the“Set” softkey.Figure 3.1.1.2.2 – TTG-7000 Network Connections Change Settings MenuThe internal DSP IP address can also be changed from the factory default of 192.168.0.1, but ATGrecommends not changing it, only if the IP address is needed by the external LAN connections.On the Network Connections Menu select the DSP connection row on the grid and press the “ChangeSettings” softkey. A screen similar to Figure 3.1.1.2.3 should appear.TTG-7000 User’s Manual Page 2190-7000-0001 Rev E