TTG-7000 operation manual - AvionTEq

Note: That for all intruders the location can be entered using range and bearing or latitude andlongitude. If range and bearing is used the TTG-7000 will calculate the latitude and longitude of theintruder. If latitude and longitude is being used the TTG-7000 will calculate the range and bearingfrom the own aircraft.8. When all the required information is entered press the Back softkey on the bottom of thesoftkey area to return to the TCAS Scenario Menu.9. To start the scenario use the Scenario softkey. Once the scenario has started the Run Time boxon the top of the menu should be changing with the current scenario time.10. If the scenario terminates, the Scenario softkey will return to the off position. If user wants toterminate the scenario before the total scenario time, change the Scenario softkey to the offposition.TTG-7000 User’s Manual Page 17590-7000-0001 Rev E