TTG-7000 operation manual - AvionTEq

5. Set the number of static intruders to at least 1 using either the Number of Static Intruderscombobox or softkey.6. Press the Intruders softkey to edit the intruder information. Select Mode S Extended in theIntruder Mode combobox or softkey to display the Static Mode S Extended Menu.7. Use the controls on Static Mode S Extended Menu to enter the information for your Mode SExtended intruder.Static Mode S Extended Minimum ParametersParameter Default Selection (Range)Tx Channel Gen A Gen A, Gen C, or Gen DAltitude 1000 -1000 to 126700 feetBearing 0 0 to 359 degreesRange 0 0 to 160 NmiLatitude-90 to 90 degreesLongitude-180 to 180 degreesVelocity 0 0 to 2000 knotsVertical Speed 0 +/- 32576 ft/minTrack 0 -180 to 180 degreesReply Power -20 -20 to -90 dBm (Low Power)1 to -69 dBm (Hi Power)Reply Antenna By Altitude Bottom, Top, Both, Alternating,By AltitudeSquitter Power -50 -20 to -90 dBm (Low Power)1 to -69 dBm (Hi Power)Squitter Antenna Both Top, Bottom, BothStart at 0 0 to Scenario DurationStop at Scenario Duration 0 to Scenario DurationEnable Enable Enable/DisableReply On On/OffSquitter On On/OffGround Off On/OffDO-260 Mode DO-260 DO-260, DO-260A, DO-260BCrosslink Capability Off On/OffMode S Address0 – FFFFFFOverride Range Calculation Off On/OffAltitude Code Mode Binary Binary, GilhamReply Probability 1 0, 0.2, 0.4, 0.6, 0.8, 1Squitter Probability 1 0, 0.2, 0.4, 0.6, 0.8, 1Mode A Code 0000 0000-7777 (Octal)TTG-7000 User’s Manual Page 17290-7000-0001 Rev E