TTG-7000 operation manual - AvionTEq

LatitudeLongitude-90 to 90 degrees-180 to 180 degreesReply Power -20 -20 to -90 dBm (Low Power)1 to -69 dBm (Hi Power)Reply Antenna By Altitude Bottom, Top, Both, Alternating,By AltitudeSquitter Power -50 -20 to -90 dBm (Low Power)1 to -69 dBm (Hi Power)Squitter Antenna Both Top, Bottom, BothStart at 0 0 to Scenario DurationStop at Scenario Duration 0 to Scenario DurationEnable Enable Enable/DisableReply On On/OffSquitter On On/OffGround Off On/OffCrosslink Capability Off On/OffMode S Address0 – FFFFFFAltitude Code Mode Binary Binary, GilhamReply Probability 1 0, 0.2, 0.4, 0.6, 0.8, 1Squitter Probability 1 0, 0.2, 0.4, 0.6, 0.8, 1Mode A Code 0000 0000-7777 (Octal)CA 0 0-7FS 0 0-7DR 0 0-31UM 0 0-63SL No TCAS Sensitivity Level 0-7RI (AQ=0) No on board TCAS 0-7RI(AQ=1) No Airspeed 0-7Note: That for all intruders the location can be entered using range and bearing or latitude andlongitude. If range and bearing is used the TTG-7000 will calculate the latitude and longitude of theintruder. If latitude and longitude is being used the TTG-7000 will calculate the range and bearingfrom the own aircraft.8. When all the required information is entered press the Back softkey on the bottom of thesoftkey area to return to the TCAS Scenario Menu.9. To start the scenario use the Scenario softkey. Once the scenario has started the Run Time boxon the top of the menu should be changing with the current scenario time.TTG-7000 User’s Manual Page 16990-7000-0001 Rev E