TTG-7000 operation manual - AvionTEq

Menu Control Function12 NIC13 Uplink Feedback14 Power. Range +1 to -98 dBm15 Enable. If check, the target is enabled.16 Start and Stop Times. For dynamic targets, the time when the target is operational.17 MSO. The target MSO transmission slot.18 Offset and Override. If override is disabled, the offset is calculated between thetarget latitude and longitude and the receiving station latitude and longitude. Ifoverride is enabled, the calculated offset is replace by the offset entered.19 Address Qualifier20 Vertical Velocity. [Geometric or Barometric]21 Altitude Type. [Barometric or Geometric]22 UTC Coupled.SoftkeyFunctionType Same as menu control item 1.Target Number Same as menu control item 2.Enable Same as menu control item 15.Payload Type Same as menu control item 3.MSO Same as menu control item 17.Offset Same as menu control item 18.Offset Manual Override Same as menu control item 18.ADS-B Message Illustrate UAT ADS-B Message MenuTTG-7000 User’s Manual Page 15790-7000-0001 Rev E