TTG-7000 operation manual - AvionTEq

3.1.3.1. Transponder SettingsFigure 3.1.3.1.1 illustrates the TTG-7000 Transponder Settings Menu. The Transponder Settings Menuallows the user to configure the Transmitter, Receiver, and Antenna Simulator modules within the testset for transponder tests. This menu is mainly used for testing and troubleshooting of the TTG-7000.For Transponder unit testing, this menu should only be used to set the individual RF generatorfrequencies.12345678Figure 3.1.3.1.1 – Transponder Settings MenuMenu Control Function1 Suppression Out On/Off. Future use.2 Receiver Path Combobox allows the user to select which port to connect theTop/Bottom Receiver. Selections available are Rx T1/B1, Rx T2/B2, Rx T3/B3, RxT4/B4, Chamber, or Combine.3 Tx Frequency Numeric Box allows the setting of the Transmitter frequency. Individualsetting for each transmitter. Range from 962 to 1213 MHz in 0.1 MHz steps.4 Tx Power Numeric Box allows the setting of the Transmitter power from -20 to -90dBm in 1 dB steps.TTG-7000 User’s Manual Page 13090-7000-0001 Rev E