TTG-7000 operation manual - AvionTEq
TTG-7000 operation manual - AvionTEq TTG-7000 operation manual - AvionTEq
Menu Control Function5 Trigger mode. (Single, Normal)6 Trigger edge. (+ or -). Only displayed if trigger source is Log Video.7 Waveform graph area. Dragging the mouse or finger on the touchscreen over the axisand graph can change the horizontal/vertical scales and horizontal/vertical positions.8 Trigger Antenna (Top or Bottom).9 Sampling timespan. (10, 25, or 100 nanoseconds)[100, 40, or 10 MHz)10 Receiver Port11 Channel 2 selectionSoftkeyFunctionScope/Measurement Same as menu control item 1Channel 1EnableSource Same as menu control item 2ClearChannel 2EnableSource Same as menu control item 11ClearTriggerLevel Same as menu control item 4Edge Same as menu control item 6Source Same as menu control item 3Antenna Same as menu control item 8Ports Same as menu control item 10Horizontal Scale Same as menu control item 9Signal TestTTG-7000 User’s Manual Page 12690-7000-0001 Rev E
123478956Figure 3.1.2.8.2 – Measurement MenuMenu Control Function1 Measurement/Scope control. Allows the user to perform a measurement or set thescope to view a received waveform.2 Measurement type (Pulse, Frequency, Phase)3 Pulse selection combobox.4 Trigger level selection. If ATE Line Mode C is selected for the trigger source then acombobox to select whisper/shout level is displayed. If Log Video is selected for thetrigger source then a slider for power level is displayed. If ATE Line Mode S is selectedfor trigger source then no control is displayed.5 Trigger mode. (Single, Normal)6 Waveform graph area. Dragging the mouse or finger on the touchscreen over the axisand graph can change the horizontal/vertical scales and horizontal/vertical positions.7 Trigger source selection (Log Video, ATE Line Mode S, ATE Line Mode A, or ATE LineMode C).8 Receiver Port9 Top/Bottom Antenna selection.SoftkeyFunctionScope/Measurement Same as menu control item 1Measurement type Same as menu control item 2TTG-7000 User’s Manual Page 12790-7000-0001 Rev E
- Page 75 and 76: 3.1.2.5.3. Static Mode C Definition
- Page 77 and 78: SoftkeyFunctionMode A Code (D) Same
- Page 79 and 80: Menu Control Function10 Vertical Sp
- Page 81 and 82: 3.1.2.5.5. Static Mode S Extended D
- Page 83 and 84: Menu Control Function40 CA FieldSof
- Page 85 and 86: 3.1.2.5.5.1. Mode S Squitter Defini
- Page 87 and 88: 3.1.2.5.5.3. Velocity Squitter Defi
- Page 89 and 90: 3.1.2.5.5.4. Ident Squitter Definit
- Page 91 and 92: 3.1.2.5.5.5. BDS Register Definitio
- Page 93 and 94: Menu Control Function5 Altitude num
- Page 95 and 96: SoftkeyFunctionTransponder Capabili
- Page 97 and 98: Menu Control Function8 Latitude. Ra
- Page 99 and 100: 3.1.2.5.8. Dynamic TIS-B Definition
- Page 101 and 102: SoftkeyFunctionIdent Format Type Sa
- Page 103 and 104: Menu Control Function8 Latitude. Ra
- Page 105 and 106: 3.1.2.5.10. Dynamic ADS-R Definitio
- Page 107 and 108: SoftkeyFunctionAltitude Same as men
- Page 109 and 110: 3.1.2.5.12. TCAS Ground Station Men
- Page 111 and 112: SoftkeyFunctioncontents.TTG-7000 Us
- Page 113 and 114: SoftkeyResetF1 Pulse C1 Pulse A1 Pu
- Page 115 and 116: SoftkeyFunctionTx Channel Same as m
- Page 117 and 118: Menu Control Function10 Vertical Sp
- Page 119 and 120: SoftkeyFunctionVideo Block Number S
- Page 121 and 122: 3.1.2.6. TCAS ATE Line MenuFigure 3
- Page 123 and 124: 3.1.2.7. TCAS Chamber Mode MenuFigu
- Page 125: 3.1.2.8. Measurement MenuFigure 3.1
- Page 129 and 130: 3.1.3. Transponder MenuFigure 3.1.3
- Page 131 and 132: Menu Control Function5 Tx Path allo
- Page 133 and 134: Menu Control Function8 Suppression
- Page 135 and 136: Menu Control Function8 Suppression
- Page 137 and 138: Menu Control Function8 Suppression
- Page 139 and 140: Menu Control Function8 Suppression
- Page 141 and 142: Menu Control Functionsteps. Power d
- Page 143 and 144: Menu Control Functionsteps. Power d
- Page 145 and 146: Menu Control Function9 Interrogatio
- Page 147 and 148: 3.1.4.1. UAT SettingsFigure 3.1.4.1
- Page 149 and 150: 3.1.4.2. UAT Receiver MenuFigure 3.
- Page 151 and 152: SoftkeyFiltered Masked MenuHighligh
- Page 153 and 154: SoftkeyFunctionAltitude Same as men
- Page 155 and 156: Menu Control Functionsaved file.9 U
- Page 157 and 158: Menu Control Function12 NIC13 Uplin
- Page 159 and 160: Figure 3.1.4.4.1.3 illustrates the
- Page 161 and 162: SoftkeyFunctionType Same as menu co
- Page 163 and 164: SoftkeyFunctionType Same as menu co
- Page 165 and 166: 5. If all devices enabled in the co
- Page 167 and 168: 10. If the scenario terminates, the
- Page 169 and 170: LatitudeLongitude-90 to 90 degrees-
- Page 171 and 172: Stop at Scenario Duration 0 to Scen
- Page 173 and 174: Identification CodeStatic (STAxxx)
- Page 175 and 176: Note: That for all intruders the lo
Menu Control Function5 Trigger mode. (Single, Normal)6 Trigger edge. (+ or -). Only displayed if trigger source is Log Video.7 Waveform graph area. Dragging the mouse or finger on the touchscreen over the axisand graph can change the horizontal/vertical scales and horizontal/vertical positions.8 Trigger Antenna (Top or Bottom).9 Sampling timespan. (10, 25, or 100 nanoseconds)[100, 40, or 10 MHz)10 Receiver Port11 Channel 2 selectionSoftkeyFunctionScope/Measurement Same as menu control item 1Channel 1EnableSource Same as menu control item 2ClearChannel 2EnableSource Same as menu control item 11ClearTriggerLevel Same as menu control item 4Edge Same as menu control item 6Source Same as menu control item 3Antenna Same as menu control item 8Ports Same as menu control item 10Horizontal Scale Same as menu control item 9Signal Test<strong>TTG</strong>-<strong>7000</strong> User’s Manual Page 12690-<strong>7000</strong>-0001 Rev E