TTG-7000 operation manual - AvionTEq

Menu Control Function10 Vertical Speed numeric box. Used only if dynamic velocity not 0.11 Track numeric box. Used only if dynamic velocity not 0.12 Reply Power numeric box. Low power range -20 to -90 dBm in 1 dB steps. High powerrange from 1 to -69 dBm.13 Reply Antenna combobox. (Top Only, Bottom Only, Alternating, Both, By Altitude)14 Enable checkbox allows enabling or disabling the video block.15 Mode S Address numeric box.16 Altitude Code switch (Gilham or Binary)SoftkeyFunctionVideo Block Number Same as menu control item 1Enable Same as menu control item 14Starting At Same as menu control item 2Stopping At Same as menu control item 3Trigger Source Same as menu control item 4Mode S Address Same as menu control item 15Tx channel Same as menu control item 5Bearing Same as menu control item 6Range Same as menu control item 7Altitude CodeAltitude Same as menu control item 8Velocity Same as menu control item 9Vertical Speed Same as menu control item 10Track Same as menu control item 11Reply Power Same as menu control item 12Reply Antenna Same as menu control item 13One Shot Video DataVideo WaypointsVideo Data Bit Opens a new menu to define the data bitsTTG-7000 User’s Manual Page 11790-7000-0001 Rev E