TTG-7000 operation manual - AvionTEq

3.1.2.5.15. TCAS Video Blocks MenuFigure 3.1.2.5.15.1 illustrates the TTG-7000 TCAS Video Blocks Definition Menu. This menu allows theuser to define the video block and trigger mechanism to transmit the block. Figure 3.1.2.5.15.1 showsthe Mode S trigger source and Figure 3.1.2.5.15.2 shows the ATCRBS trigger source.12341415561678910111213Figure 3.1.2.5.15.1 TCAS Video Blocks Definition MenuMenu Control Function1 Video Block numeric box.2 Starting at numeric box allows setting the initial time for video block transmission.3 Stopping at numeric box allows setting the final time for video block transmission.4 Trigger Source combobox allows setting the trigger source to either Mode C or Mode Sinterrogation.5 Tx Channel combobox allows setting the transmitter to transmit the video block.6 Bearing numeric box allows setting the bearing of the transmitter when transmittingthe video block.7 Range numeric box allows setting the time delay from the trigger.8 Altitude numeric box. Used only if dynamic velocity not 0.9 Velocity numeric box.TTG-7000 User’s Manual Page 11690-7000-0001 Rev E