mCq pCO - Standard + Heat Pump - McQuay

mCq pCO - Standard + Heat Pump - McQuay mCq pCO - Standard + Heat Pump - McQuay

13.07.2015 Views

Conditioning: pCO Standard chiller + heat pump User Guide ver. 2.9 02/11/99CLOCK loopREG_CLOCK_USClock & DateSettingTime 00:00Date 00/00/1994WEEKLY_TIME-ZONESTime Zone SelectionUnit On/OffWeeklyNDailyNWEEKLY1_TZWeekly Time ZoneUnit On at SunUnit Off at SunPag.44/61

Conditioning: pCO Standard chiller + heat pump User Guide ver. 2.9 02/11/99WEEKLY2_TZDaily Time ZoneUnit On at00:00Unit Off at00:00DAILY_TZDaily Time Zonewith SetpointVariation SettingNDAILY1_TZFirst Time ZoneStart at 00:00hWinterSet45.0°CSummer Set 12.0°CDAILY2_TZSecond Time ZoneStart at 00:00hWinterSet45.0°CSummer Set 12.0°CDAILY3_TZThird Time ZoneStart at 00:00hWinterSet45.0°CSummer Set 12.0°CDAILY4_TZFourth Time ZoneStart at 00:00hWinterSet45.0°CSummer Set 12.0°CThe first mask appearing after having pressed the CLOCK button is a mask where you canselect the presence of the clock card itself and set the current time and date.If the card is not present but has been selected or has been badly connected or is damaged,the realtive alarm will appear on the display.Time-Zones masks can be accessed only if the controller is complete with clock card.In the masks loop shown above you will have to set the following parameters:• weekly and daily time-zones permitting the automatic ON/OFF of the unit at set times anddays;• days in which the unit must be switched on and off (this mask will be displayed only if theweekly time-zone mask has been previously enabled);Pag.45/61

Conditioning: <strong>pCO</strong> <strong>Standard</strong> chiller + heat pump User Guide ver. 2.9 02/11/99CLOCK loopREG_CLOCK_USClock & DateSettingTime 00:00Date 00/00/1994WEEKLY_TIME-ZONESTime Zone SelectionUnit On/OffWeeklyNDailyNWEEKLY1_TZWeekly Time ZoneUnit On at SunUnit Off at SunPag.44/61

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!