INSTRUCTION MANUAL - Omron Healthcare
INSTRUCTION MANUAL - Omron Healthcare
INSTRUCTION MANUAL - Omron Healthcare
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>INSTRUCTION</strong> <strong>MANUAL</strong>7 seriesBlood Pressure Monitorwith ComFit TM CuffModel BP760ENGLISHESPAÑOL
TABLE OF CONTENTSBefore Using the MonitorIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Operating the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Risk of Electrical Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Before Taking a Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Operating InstructionsKnow Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Unit Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Display Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Irregular Heartbeat Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Movement Error Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Morning Hypertension Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . .13Heartbeat Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Average Value Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Morning Average Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Evening Average Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Cuff Wrap Guide Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Using the AC Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Setting the Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19Applying the Arm Cuff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .232
TABLE OF CONTENTSTaking a Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Cuff Wrap Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Special Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Using the Memory Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Averaging Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31To Display the Measurement Values . . . . . . . . . . . . . . . . . . . . . . .32Morning and Evening Averages . . . . . . . . . . . . . . . . . . . . . . . . . .33Morning Averages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Evening Averages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33To Display Morning and Evening Averages . . . . . . . . . . . . . . . . .34Display Combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35To Delete All Values Stored in the Memory . . . . . . . . . . . . . . . . .36Care and MaintenanceCare and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37Error Indicators and Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . .39FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41Limited Warranties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .433
Before Using the MonitorINTRODUCTIONThank you for purchasing the <strong>Omron</strong> ® BP760 IntelliSense ® AutomaticBlood Pressure Monitor with ComFit TM Cuff.Fill in for future reference.DATE PURCHASED: __________________SERIAL NUMBER: ____________________• Staple your purchase receipt here• Register your product on-line atwww.register-omron.comYour new digital blood pressure monitor uses the oscillometric methodof blood pressure measurement. This means the monitor detects yourblood’s movement through your brachial artery and converts themovements into a digital reading. An oscillometric monitor does notneed a stethoscope so the monitor is simple to use.The BP760 comes with the following components:• Monitor • ComFit TM Cuff • AC Adapter• Storage Case• Instruction Manual printed in English and Spanish• Quick Start GuideThe BP760 IntelliSense ® Automatic Blood Pressure Monitor is intendedfor home use.SAVE THESE <strong>INSTRUCTION</strong>S4
To assure the correct use of the product basic safety measures shouldalways be followed including the warnings and cautions listed in thisinstruction manual.SAFETY SYMBOLS USED IN THIS <strong>INSTRUCTION</strong> <strong>MANUAL</strong>WARNINGSAFETY INFORMATIONIndicates a potentially hazardous situationwhich, if not avoided, could result in death orserious injury.CAUTIONIndicates a potentially hazardous situationwhich, if not avoided, may result in minor ormoderate injury to the user or patient ordamage to the equipment or other property.OPERATING THE DEVICEContact your physician for specific information about your bloodpressure. Self-diagnosis and treatment using measured results maybe dangerous. Follow the instructions of your physician or licensedhealthcare provider.DO NOT adjust medication based on measurement results from thisblood pressure monitor. Take medication as prescribed by yourphysician. Only a physician is qualified to diagnose and treat HighBlood Pressure.The monitor is not intended to be a diagnostic device.If battery fluid should get in your eyes, immediately rinse withplenty of clean water. Contact a physician immediately.Read all of the information in the instruction manual and any otherliterature in the box before operating the unit.5
SAFETY INFORMATIONRISK OF ELECTRICAL SHOCKDo not plug or unplug the power cord into the electrical outlet withwet hands.Do not overload power outlets. Plug the device into the appropriatevoltage outlet.CARE AND MAINTENANCEDo not subject the monitor to strong shocks, such as dropping theunit on the floor.Do not submerge the device or any of the components in water.Store the device and the components in a clean, safe location.Changes or modification not approved by <strong>Omron</strong> <strong>Healthcare</strong> willvoid the user warranty. Do not disassemble or attempt to repair theunit or components.7
BEFORE TAKING A MEASUREMENTTo ensure a reliable reading follow these recommendations:1. Avoid eating, drinking alcohol, smoking, exercising, and bathing for30 minutes prior to taking a measurement. Rest for at least 15minutes prior to taking the measurement.2. Stress raises blood pressure. Avoid taking measurements duringstressful times.3. Measurements should be taken in a quiet place.4. Remove tight-fitting clothing from your arm.5. Sit on a chair with your feet flat on the floor. Rest your arm ona table so that the cuff is at the same level as your heart.6. Remain still and do not talk during the measurement.7. Wait 2-3 minutes between measurements. The wait time allows thearteries to return to the condition prior to taking the blood pressuremeasurement. You may need to increase the wait time depending onyour individual physiological characteristics.8. Keep a record of your blood pressure and pulse readings for yourphysician. A single measurement may not provide an accurateindication of your true blood pressure. You need to take and recordseveral readings over a period of time. Try to measure your bloodpressure at about the same time each day for consistency.8
Operating InstructionsKNOW YOUR UNITMain Unit:DisplaySET ButtonMorning/Evening Average( ) ButtonUp/Down( / ) ButtonsMemory (Start/Stop Button) ButtonBattery CompartmentAir JackAC Adapter Jack9
KNOW YOUR UNITComponents:Air TubeHousingCordAC AdapterAir Plug(Connects to Air Jack)Arm Cuff<strong>INSTRUCTION</strong> <strong>MANUAL</strong>7 seriesBlood Pressure Monitorwith ComFit TM CuffModel BP760ENGLISHESPAÑOLStorage CaseInstruction ManualQuick Start Guide10
UNIT DISPLAYMorning Average SymbolDate/Time DisplayEvening Average SymbolIrregular Heartbeat SymbolWeek DisplaySystolic Blood PressureDiastolic Blood PressureHeartbeat SymbolLow Battery IndicatorAverage Value SymbolMemory SymbolMorning Hypertension SymbolMovement SymbolBlood Pressure Level IndicatorDeflation SymbolCuff Wrap GuidePulse Display / Memory Number11
DISPLAY SYMBOLSIRREGULAR HEARTBEAT SYMBOL ( )When the monitor detects an irregular rhythm two or more times duringthe measurement, the Irregular Heartbeat Symbol ( ) will appear on thedisplay with the measurement values.An irregular heartbeat rhythm is defined asNormal Heartbeata rhythm that varies by less than 25% from Pulsethe average rhythm or 25% more than the Bloodaverage rhythm detected while the monitor pressureis measuring the systolic and diastolic bloodIrregular Heartbeatpressure.Short LongIf the irregular heartbeat symbol ( )displays with your measurement results, werecommend you consult your physician.Follow the directions of your doctor.PulseBloodpressureMOVEMENT ERROR SYMBOL ( )The Movement Error Symbol is displayed if you move your body duringthe measurement. Please remove the arm cuff, and wait 2-3 minutes.Take another measurement, remain still during inflation.12
DISPLAY SYMBOLSThe American Heart Association 1 recommends the following guidelinefor upper limit of normal for home blood pressure readings:AHA Home Guideline for Upper Limit of Normal BPSystolic Blood Pressure135 mmHgDiastolic Blood Pressure85 mmHgThis is a general guideline because blood pressure depends onage and morbidity. The AHA recommends a lower home bloodpressure goal for certain patients, including diabetic patients,pregnant women, and patients with renal failure 1 .The monitor is not intended to be a diagnostic device.MORNING HYPERTENSION SYMBOL ( )The Morning Hypertension Symbol is displayed if the morning averagereading for a week is above 135 for the Systolic Blood Pressure valueand/or 85 for the Diastolic Blood Pressure value when viewing theMorning Averages and the Evening Averages in the memory.<strong>Omron</strong> <strong>Healthcare</strong> recommends you contact your physician if theMORNING HYPERTENSION SYMBOL and/or the HEARTBEATSYMBOL appear on the display with your measurement values.1American Heart Association Scientific Statement 200413
DISPLAY SYMBOLSHEARTBEAT SYMBOL ( )TAKING A MEASUREMENTThe Heartbeat Symbol flashes on the display during themeasurement. The Heartbeat Symbol flashes at every heartbeat.AVERAGE VALUE SYMBOL ( )The Average Value Symbol is displayed when you press the memorybutton. The most recent average reading appears on the display screen.MORNING AVERAGE SYMBOL ( )The Morning Average symbol is displayed when viewing MorningAverages using the Memory Function.EVENING AVERAGE SYMBOL ( )The Evening Average symbol is displayed when viewing EveningAverages using the Memory Function.CUFF WRAP GUIDE SYMBOL( / )When the cuff is applied correctly, ( ) is displayed while taking ameasurement or using the memory function. If the cuff is not appliedcorrectly, ( ) is displayed.14
USING THE AC ADAPTERIMPORTANT SAFETY <strong>INSTRUCTION</strong>SSAVE THESE <strong>INSTRUCTION</strong>S- DANGER -TO REDUCE THE RISK OFFIRE OR ELECTRIC SHOCK,CAREFULLY FOLLOW THESE <strong>INSTRUCTION</strong>S.For connection to a power supply not in the U.S.A., use anattachment plug adapter of the proper configuration for the poweroutlet.The power unit (AC Adapter) is intended to be correctly orientedin a vertical or floor mount position.NOTES:• Use only the authorized <strong>Omron</strong> AC Adapter that came withthis monitor.• We recommend you install the batteries even if the ACAdapter is used. If no batteries are installed, you may need toreset the date and time if the AC Adapter is disconnected.The measurement results will not be deleted.CAUTIONUse only <strong>Omron</strong> authorized parts and accessories. Parts andaccessories not approved for use with the device may damage theunit.15
USING THE AC ADAPTERTO CONNECT THE AC ADAPTER1 Insert the AC Adapter Plug intothe AC Adapter Jack on the backside of the monitor as illustrated.2 Plug the AC Adapter into a 120VAC outlet (60 cycles).HousingTO DISCONNECT THE AC ADAPTER1 Hold the Housing to remove the AC Adapter from the electricaloutlet.2 Remove the AC Adapter plug from the monitor.CordWARNINGDo not plug or unplug the power cord into the electrical outlet withwet hands.CAUTIONDo not overload power outlets. Plug the device into the appropriatevoltage outlet.16
BATTERY INSTALLATION1. Remove the battery cover with pulling thehook up while pushing it in the directionof the arrow.2. Install 4 “AA” size batteries so the +(positive) and - (negative) polarities matchthe polarities of the battery compartmentas indicated.Battery Cover3. Replace the battery cover.17
BATTERY REPLACEMENTBATTERY INSTALLATIONLow Battery IndicatorWhen the Low Battery Indicator appears on the display screen turn themonitor off and remove all the batteries. Replace with four new batteriesat the same time. Longlife alkaline batteries are recommended.CAUTIONIf battery fluid should get in your eyes, immediately rinse withplenty of clean water. Contact a physician immediately.NOTES: • Turn the unit off before replacing the batteries. If thebatteries are removed while the unit is still on, the date andtime will be reset to that of the previous use. However, themeasurement results are not deleted.• When the batteries are replaced, you may need to reset thedate and time. If “-:--” appears on the display, refer to page19, “Setting the Date and Time”.• The supplied batteries may have a shorter life.CAUTIONDispose of the device, components and optional accessoriesaccording to applicable local regulations. Unlawful disposal maycause environmental pollution.18
SETTING THE DATE AND TIMESet the monitor to the current date and time before taking ameasurement for the first time. If the date and time are not set correctly,the measurement values stored in the memory and the average valuesmay not be correct.If the date and time are not set, “-:--” appears during or aftermeasurement.The Blood Pressure Monitor automatically stores up to 60 measurementvalues with the dates and times. The monitor also calculates weeklyaverages for measurements in the morning and in the evening. Morningand Evening averages are stored for this week and the last seven weeks.The monitor can also calculate an average reading based on the threemost recent measurements taken within 10 minutes of the last reading.NOTE: • If only two readings are stored in the memory for the 10-minute period, the average is based on the two readings.• If one reading is stored in the memory for the 10-minuteperiod, this reading is displayed as the average.19
SETTING THE DATE AND TIME1. TO START THE SETTINGPress the SET button to adjust the date and time.The year flashes on the display.2. SETTING THE YEARThe year can be set between 2010 and2040. When the display reaches 2040,it will return to 2010.Press the Up button ( ) to advanceby increments of one year.Press the SET button to set the currentyear.The month flashes on the display.NOTES: • Press the Down button ( ) to decrease the date and timevalues by decrements of one.• Press and hold the Up or Down button to increase ordecrease the date and time values faster.20
SETTING THE DATE AND TIME3. SETTING THE MONTHPress the Up button ( ) to advanceby increments of one month.Press the SET button to set the currentmonth.The day flashes on the display.4. SETTING THE DAYPress the Up button ( ) to advanceby increments of one day.Press the SET button to set the currentday.The hour flashes on the display.21
SETTING THE DATE AND TIME5. SETTING THE HOURThe time is set using AM or PM.Press the Up button ( ) to advanceby increments of one hour.Press the SET button to set the currenthour.The minute flashes on the display.6. SETTING THE MINUTEPress the Up button ( ) to advance by increments of one minute.Press the SET button to set the minute setting.7. TO TURN THE MONITOR OFFPress the START/STOP button.22
APPLYING THE ARM CUFFCAUTIONRead all of the information in the instruction manual and any otherliterature in the box before operating the unit.CAUTIONThis device is intended for use in measuring blood pressure andpulse rate in the adult population. Do not use this device on infantsor persons who cannot express their intentions.APPLYING THE CUFF ON THE LEFT ARM1. Make sure the air plug is securely inserted in the main unit.2. Remove tight-fitting clothing from your upper left arm.23
APPLYING THE ARM CUFF3. Sit on a chair with your feet flat on the floor. Place your left armon a table so the cuff is level with your heart.4. Hold the thumb grip on the cuffsecurely with your right hand.Thumb GripCloth Fastener5. Turn the palm of your left hand upward.24
APPLYING THE ARM CUFF6. Apply the cuff to your left upper arm so the blue stripe is on theinside of your arm and aligned with your middle finger. The air tuberuns down the inside of your arm. The bottom of the cuff should beapproximately 1/2" above your elbow.Blue Stripe1/2 inch (1 - 2 cm)Air Tube7. Wrap the cuff firmly in place around your arm using the clothfastener.25
APPLYING THE ARM CUFFAPPLYING THE CUFF ON THE RIGHT ARMWhen taking a measurement using the right arm use this instructionfor Step 6 on page 25.Apply the cuff to your right upper arm so the thumb grip is centeredon the inside of your inner arm. The bottom of the cuff should beapproximately 1/2'' above your elbow.Thumb GripNOTE: Be careful not to rest your arm on the air tube. This will restrictthe flow of air to the cuff.26
TAKING A MEASUREMENTThe monitor automatically determines your ideal inflation level. In rarecircumstances when a higher inflation may be necessary, the monitorautomatically re-inflates the cuff up to 30 mmHg higher than the initialinflation and restarts the measurement.WARNINGContact your physician for specific information about your bloodpressure. Self-diagnosis and treatment using measured results maybe dangerous. Follow the instructions of your physician or licensedhealthcare provider.CAUTIONOperate the device only as intended. Do not use the device for anyother purpose.CUFF WRAP GUIDEThis monitor checks whether the arm cuff is applied correctly during theinflation. When the cuff is applied correctly, is displayed whiletaking a measurement or using the memory function. If the cuff is notapplied correctly, is displayed. If is displayed, refer to thesection “Applying the Arm Cuff”, reapply the cuff and take anothermeasurement.27
TAKING A MEASUREMENT1. Press the START/STOP button.All symbols appear on the display.The cuff starts to inflate automatically. As the cuff inflates, the monitorautomatically determines your ideal inflation level.This monitor detects the pulse during inflation. Do not move your armand remain still until the entire measurement process is completed.NOTE: To stop the inflation or measurement, press the START/STOPbutton. The monitor will stop inflating, start deflating and willturn off.2. Inflation stops automatically and the measurement is started.As the cuff deflates, decreasing numbers appear on the display.The Heartbeat Symbol ( ) flashes at every heartbeat.28
TAKING A MEASUREMENT3. When the measurement is complete, the arm cuffcompletely deflates. Your blood pressure and pulserate are displayed.4. Press the START/STOP button to turn themonitor off.NOTE: The monitor will automatically turnoff after two minutes.WARNINGContact your physician for specific information about your bloodpressure. Self-diagnosis and treatment using measured results maybe dangerous. Follow the instructions of your physician or licensedhealthcare provider.WARNINGDO NOT adjust medication based on measurement results from thisblood pressure monitor. Take medication as prescribed by yourphysician. Only a physician is qualified to diagnose and treat HighBlood Pressure.WARNINGThe monitor is not intended to be a diagnostic device.29
TAKING A MEASUREMENTSPECIAL CONDITIONSCAUTIONInflating to a higher pressure than necessary may result in bruisingwhere the cuff is applied.If your systolic pressure is known to be more than 220 mmHg, pressand hold the START/STOP button until the monitor inflates 30 to 40mmHg higher than your expected systolic pressure.NOTES:• Do not apply more pressure than necessary.• The monitor will not inflate above 299 mmHg.When the measurement is complete, the arm cuff completely deflates.Your blood pressure and pulse rate are displayed.30
USING THE MEMORY FUNCTIONThe monitor is designed to store the blood pressure and the pulserate in the memory every time a measurement is completed.The monitor automatically stores up to 60 sets of measurement values(blood pressure and pulse rate). When 60 sets of measurement values arestored, the oldest record is deleted to save the most recent values. Themonitor also stores 8 weeks of Morning Averages and 8 weeks ofEvening Averages.AVERAGING FUNCTIONThe monitor calculates the average reading based on the three mostrecent sets of measurement values taken within 10 minutes of the mostrecent reading.NOTES: • If two sets of measurement values are stored in the memoryfor the 10 minutes period, the average is based on the twosets of measurement values. If one set of measurementvalues is stored, this is displayed as the average.• When viewing the reading taken without setting the date andtime, “-:--” is displayed instead of the date and time.31
USING THE MEMORY FUNCTIONTO DISPLAY THE MEASUREMENT VALUES1. Press the Memory button ( ).The Average Symbol ( ) appears on the display when the averagereading is shown.2. Press the Down button ( ) to display the most recent set ofmeasurement values on the screen. The values are displayed from themost recent to the oldest.NOTE: The date and time are alternatelydisplayed with the measurementAlternating displayvalues.Press the Up or Down button to display thenext set of values.: To the older readings: To the more recent readingsNOTE: Press and hold the Up or Down button to display the valuesfaster.32
USING THE MEMORY FUNCTIONMORNING AND EVENING AVERAGESThe monitor calculates and displays a weekly average for measurementstaken in the morning ( ) and evening ( ). The monitor stores 8weeks of Morning Averages and 8 weeks of Evening Averages.NOTE: The week begins Sunday at 4:00 AMMORNING AVERAGESMorning averages are based on the first reading.Measurement times must be between:4:00 AM and 9:59 AM.EVENING AVERAGESEvening averages are based on the last reading.Measurement times must be between:7:00 PM and 1:59 AM.33
USING THE MEMORY FUNCTIONTO DISPLAY MORNING AND EVENING AVERAGES1. Press the Morning/ EveningAverage button ( ) to selectthe Morning or Evening average.The average for the current week“THIS WEEK” appears onthe display.2. Press the Down ( ) button to display the previous weeks.With each press of the Down ( ) button, the values are displayedfrom 1 week ago to the older.With each press of the Up ( ) button, the values are displayed from7 week ago to the recent.NOTE: If no measurement is taken in a given week, thedisplay will appear as illustrated.3. Press the START/STOP button to turn the monitor off.34
USING THE MEMORY FUNCTIONDISPLAY COMBINATIONSIn addition to the Morning Average and Evening Average Symbols, themonitor may also display the Morning Hypertension Symbol if themorning average for that week is above the AHA guidelines. (See page13 for details.) Depending on your measurement results, these may bedisplayed in the following combinations.DisplayMorningAverageMorning average from This Weekwith Morning Average SymbolMorning average from 7 weeks agowith Morning Average Symbol +Morning Hypertension SymbolEveningAverageEvening average from This Weekwith Evening Average SymbolEvening average from 7 weeks agowith Evening Average Symbol +Morning Hypertension SymbolAverage within AHA guidelines35Average above AHA guidelines +Morning Hypertension
USING THE MEMORY FUNCTIONThe Morning Hypertension Symbol ( ) appears if the weekly averagefor morning measurements is above 135/85.In this case the Morning Hypertension Symbol ( ) is displayed whenthe Evening Average is displayed, regardless of the values for theEvening Average.TO DELETE ALL VALUES STORED IN THE MEMORYYou cannot partially delete values stored in the memory. All values willbe deleted.1. While holding the Memory button ( ) and the START/STOP buttonsimultaneously for more than 2 seconds all values will be deleted.36
Care and MaintenanceCARE AND MAINTENANCETo keep your digital blood pressure monitor in the best condition andprotect the unit from damage, follow the directions listed below:Keep the monitor in the storage casewhen not in use. Make sure the ACadapter is placed under the main unit sothat it does not damage the display.Avoid kinking or sharply bending the ACAdapter cord.Do not forcefully bend the arm cuff orair tube. Do not fold tightly.Clean the monitor with a soft dry cloth. Do not use any abrasiveor volatile cleaners. Do not attempt to clean the cuff.CAUTIONDo not submerge the device or any of the components in water.Do not subject the monitor to extreme hot or cold temperatures,humidity or direct sunlight.CAUTIONStore the device and the components in a clean, safe location.CAUTIONDo not subject the monitor to strong shocks, such as dropping theunit on the floor.Remove the batteries if the unit will not be used for three months orlonger. Always replace all the batteries with new ones at the same time.37
CARE AND MAINTENANCEUse the unit consistent with the instruction provided in this manual.CAUTIONChanges or modification not approved by <strong>Omron</strong> <strong>Healthcare</strong> willvoid the user warranty. Do not disassemble or attempt to repair theunit or components.CAUTIONUse only <strong>Omron</strong> authorized parts and accessories. Parts andaccessories not approved for use with the device may damagethe unit.38
ERROR INDICATORS AND TROUBLESHOOTING TIPSERROR INDICATORSSYMBOL CAUSE CORRECTIONAir plug disconnected.Arm cuff not applied correctly.Insert the plug securely. Refer to “Applying theArm Cuff”.Apply the arm cuff correctly. Refer to “Applyingthe Arm Cuff”.Air is leaking from the arm cuff.Cuff over inflated.Replace the cuff with the new one.Repeat measurement. Remain still and do not talkduring measurement. Refer to “Taking aMeasurement”.If “E2” appears repeatedly, inflate the cuff manuallyuntil it is 30 to 40 mmHg above your previousmeasurement result. Refer to “Taking a Measurement”.The arm cuff was inflated above 299mmHg when inflating the cuff manually.Movement during measurement.Do not inflate the cuff above 299 mmHg. Refer to“Taking a Measurement”.Repeat measurement. Remain still and do not talkduring measurement. Refer to “Taking aMeasurement”.Clothing is interfering with thearm cuff.Remove any clothing interfering with the arm cuff.Refer to “Applying the Arm Cuff”.Device error.Contact Customer Service.Cuff is not applied correctly.Refer to “Applying the Arm Cuff”.Batteries are wornReplace the four batteries.Refer to “Battery Installation”.39
ERROR INDICATORS AND TROUBLESHOOTING TIPSTROUBLESHOOTING TIPSNo power.PROBLEMNo display appears on the unit.Measurement values appeartoo high or too low.CAUSES AND SOLUTIONSReplace all four batteries with newones.Check the battery installationfor proper placement of thebattery polarities.Blood pressure varies constantly.Many factors including stress, timeof day, and how you wrap the cuff,may affect your blood pressure.Review the sections “Before Takinga Measurement” and “Taking aMeasurement.”40
FCC STATEMENTNOTE:POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U.S.A. only)This product has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. The product generates, uses, and canradiate radio frequency energy and, if not installed and used in accordancewith the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If the product does cause harmful interference to radio or televisionreception, which can be determined by turning the product on and off, theuser is encouraged to try to correct the interference by one or more of thefollowing measures:• Reorient or relocate the receiving antenna.• Increase the separation between the product and the receiver.• Connect the product into an outlet on a circuit different from that to whichthe receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for Canada only)This digital apparatus does not exceed the Class B limits for radio noiseemissions from digital apparatus as set out in the interference-causing equipmentstandard entitled “Digital Apparatus”, ICES-003 of the Canadian Department ofCommunications.Cet appareil numérique respecte les limites de bruits radioeléctriques applicablesaux appareils numériques de Clase B prescrites dans la norme sur le materielbrouilleur: “Appareils Numériques”, ICES-003 édictée par le minister descommunications.Changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.41
LIMITED WARRANTIESYour <strong>Omron</strong> ® BP760 IntelliSense ® Automatic Blood Pressure Monitor, excludingthe arm cuff, is warranted to be free from defects in materials and workmanshipappearing within 5 years from the date of purchase, when used in accordancewith the instructions provided with the monitor. The arm cuff is warranted to befree from defects in materials and workmanship appearing within one year fromthe date of purchase when the monitor is used in accordance with the instructionsprovided with the monitor. The above warranties extend only to the original retailpurchaser.We will, at our option, repair or replace without charge any monitor or arm cuffcovered by the above warranties. Repair or replacement is our only responsibilityand your only remedy under the above warranties.To obtain warranty service contact Customer Service by calling 1-800-634-4350 forthe address of the repair location and the return shipping and handling fee.Enclose the Proof of Purchase. Include a letter, with your name, address, phonenumber, and description of the specific problem. Pack the product carefully toprevent damage in transit. Because of possible loss in transit, we recommendinsuring the product with return receipt requested.THE FOREGOING IS THE SOLE WARRANTY PROVIDED BY OMRONIN CONNECTION WITH THIS PRODUCT, AND OMRON HEREBYDISCLAIMS ANY OTHER WARRANTIES, EXPRESS OR IMPLIED,INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY ANDFITNESS FOR A PARTICULAR PURPOSE. IMPLIED WARRANTIESAND OTHER TERMS THAT MAY BE IMPOSED BY LAW, IF ANY, ARELIMITED IN DURATION TO THE PERIOD OF THE ABOVE EXPRESSWARRANTY.OMRON SHALL NOT BE LIABLE FOR LOSS OF USE OR ANY OTHERSPECIAL, INCIDENTAL, CONSEQUENTAIL OR INDIRECT COSTS,EXPENSES OR DAMAGES.This warranty provides you with specific legal rights, and you may have otherrights that vary by jurisdiction. Because of special local requirements, some ofthe above limitations and exclusions may not apply to you.FOR CUSTOMER SERVICEVisit our web site at:www.omronhealthcare.comCall toll free: 1-800-634-435042
SPECIFICATIONSModel:BP760 (HEM-7220-Z)Display:LCD Digital DisplayMeasurement Range: Pressure: 0 to 299 mmHg, Pulse: 40 to 180/min.Accuracy/Calibration: Pressure: ±3mmHg or 2% of readingPulse: ±5% of readingInflation:Automatic by electric pumpDeflation:Automatic pressure release valveRapid Air Release: Automatic exhaust valveMeasurement Method: Oscillometric methodPower Source: 120V 60Hz AC adapter or 4 “AA” batteriesBattery Life: Approx. 500 uses when used 6 times a daywith 4 new alkaline batteriesOperating Temperature 50ºF to 104ºF (10ºC to 40ºC) /15 to 90% RH/Humidity:Storage Temperature -4ºF to 140ºF (-20ºC to 60ºC) /10 to 95% RH/Humidity/Air Pressure: /700 - 1060 hPaMain Unit Weight: Approximately 15 1/8 oz. (430 g)not including batteriesMain Unit Dimensions: Approx. 6 1/4" (l) × 4 7/8" (w) × 3 5/16" (h)(158 mm × 124 mm × 86 mm)Cuff Size:Approximately 6" (w) (152 mm)Cuff tube 23 5/8" (l) (600 mm)Cuff Circumference: Fits arm circumferences 9" to 17"(220 mm to 420 mm)Memory: Up to 60Contents:Main Unit, ComFit TM Cuff, AC Adapter,Instruction Manual, Quick Start Guide, Storage CaseNOTE: These specifications are subject to change without notice.43
Manufactured by OMRON HEALTHCARE Co., Ltd.Made in ChinaDistributed by:<strong>Omron</strong> <strong>Healthcare</strong>, Inc.1200 Lakeside DriveBannockburn, IL 60015www.omronhealthcare.comCopyright © 2010 <strong>Omron</strong> <strong>Healthcare</strong>, Inc.