1971 US Army Vietnam War OPERATORS ... - Survival Books

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev. Vol 2/TM 1320-12/1AFigure 2-7. Screwing offensive grenade body onto fuze.(6) Remove tape from vent in nose of SmokeRifle Grenade M23 Series just prior to firing. Replacetape if grenade is not fired.(7) Do not puncture or disassemble riflegrenades.b. Preparation for Use.(1) Remove container from packing box.(2) Open container and remove rifle grenade.(3) See that safety wire in Grenades M19A1and safety clip on Grenades M22 Series are in place. Ifsafety wire or safety clip is not in place, but available,install as indicated in figure 2-8. If safety wire or safetyclip is not available, leave grenade in place and contactauthorized disposal personnel for disposition.(4) Inspect Rifle Grenades M31 for conditionof nose protector cap. If cap is dented, return grenadeto ammunition supply personnel for disposition.(5) Inspect stabilizer tube and fin assembly.If either is dented or deformed, return grenade toammunition supply personnel for disposition.c. Operation. For rifle grenade firing procedures,refer to applicable rifle operator manuals. For tacticaluse of rifle grenades, refer to FM 2330.2-9