1971 US Army Vietnam War OPERATORS ... - Survival Books

WWW.SURVIVALEBOOKS.COMARMY TM 9-1330-200-12NAVY OP 3833 1st Rev Vol 2MARINE CORPS TM-1330-12/1AOPERATOR'S AND ORGANIZATIONAL MAINTENANCE MANUALFORGRENADESThis copy is a reprint which includes current pages from Changes 1 through 12.DEPARTMENTS OF THE ARMY AND THE NAVYSEPTEMBER 1971

WWW.SURVIVALEBOOKS.COMWARNINGARMY TM 9-1330-200-12NAVY OP 3833 1st Rev Vol 2MARINE CORPS TM-1330-12/1AHandle grenades and components containing explosives with utmost care at all times.Never disassemble grenades without specific authorization.Wait 30 minutes before approaching thrown grenade suspected of being dud.Never make unauthorized modifications to grenades.

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12TM 1330-12/1AC15Change ) HEADQUARTERS) DEPARTMENTS OF THE ARMY) AND THE NAVYNo. 15 ) Washington, DC, 16 June 1995OPERATOR'S AND UNIT MAINTENANCE MANUALFORGRENADESTM 9-1330-200-12/TM 1330-12/1A, 17 September 1971, is changed as follows:1. Remove old pages and insert new pages as indicated below. New or changed material is indicated by a vertical bar inthe margin of the page. Added or revised illustrations are indicated by a vertical bar adjacent to the identificationnumber.Remove pagesInsert pagesA and BA and B1-5 and 1-6 1-5 and 1-61-9 and 1-10 1-9 and 1-102-1 and 2-2 2-1 and 2-22-11 and 2-12 2-11 and 2-123-9 and 3-10 3-9 and 3-10C-3 and C-4 C-3 and C-4C-7 and C-8 C-7 and C-82. File this change sheet in front of the publication for reference purposes.By Order of the Secretaries of the Army and the Navy:Official:GORDON R. SULLIVANGeneral, United States ArmyChief of StaffJOEL B. HUDSONActing Administrative Assistant to theSecretary of the Army00342RONALD D. ELLIOTTExecutive DirectorMarine Corps Systems CommandDistribution:Army:To be distributed in accordance with DA Form 12-40-E, Block 0332, requirements for TM 9-1330-200-12.Marine Corps:MARCORPS CODE: BE plus 7000159(5)7000161(2)

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12TM 1330-12/1AC14CHANGE )HEADQUARTERS) DEPARTMENTS OF THE ARMY) AND THE NAVYNO. 14 ) Washington, DC, 30 September 1994OPERATOR'S AND UNIT MAINTENANCE MANUALFORGRENADESTM 9-1330-200-12/TM 1330-12/1A, 17 September 1971, is changed as follows:1. Remove old pages and insert new pages as indicated below. New or changed material is indicated by a vertical barin the margin of the page. Added or revised illustrations are indicated by a vertical bar adjacent to the identificationnumber.Remove pagesInsert pagesA and BA and B1-5 and 1-6 1-5 and 1-61-10.3 (1-10.4 blank) 1-10.3 and 1-10.41-11 and 1-12 1-11 and 1-123-3 and 3-4 3-3 and 3-4None 3-4.1 and 3-4.23-11 and 3-12 3-11 and 3-122. File this change sheet in front of the publication for reference purposes.By Order of the Secretaries of the Army and the Navy:Official:GORDON R. SULLIVANGeneral, United States ArmyChief of StaffMILTON H. HAMILTONAdministrative Assistant to theSecretary of the Army07488RONALD D. ELLIOTTExecutive DirectorMarine Corps Systems CommandDistribution:Army:To be distributed in accordance with DA Form 12-40-E, Block #0332, requirements for TM 9-1330-200-12.Marine Corps:MARCORPS CODE: BE plus 7000159 (5)7000161 (2)

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12TM 1330-12/1AC13CHANGE )HEADQUARTERS) DEPARTMENTS OF THE ARMY) AND THE NAVYNO. 13 ) Washington, DC, 3 December 1993OPERATOR'S AND UNIT MAINTENANCE MANUALFORGRENADESTM 9-1330-200-12/TM 1330-12/1A, 17 September 1971, is changed as follows:1. Remove old pages and insert new pages as indicated below. New or changed material is indicated by a vertical bar inthe margin of the page. Added or revised illustrations are indicated by a vertical bar adjacent to the identificationnumber.Remove pagesInsert pagesA (B blank)A and B2-1 and 2-2 2-1 and 2-22. File this change sheet in front of the publication for reference purposes.By Order of the Secretaries of the Army and the Navy:Official:GORDON R. SULLIVANGeneral, United States ArmyChief of StaffMILTON H. HAMILTONAdministrative Assistant to theSecretary of the Army05607RONALD D. ELLIOTTExecutive DirectorMarine Corps Systems CommandDistribution:To be distributed in accordance with DA Form 12-40-E, Block #0332, requirements for TM 9-1330-200-12.

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12TM 1330-12/1AC12CHANGE )HEADQUARTERS) DEPARTMENTS OF THE ARMY) AND THE NAVYNO. 12 ) Washington, DC, 3 December 1993OPERATOR'S AND UNIT MAINTENANCE MANUALFORGRENADESTM 9-1330-200-12/TM 1330-12/1A, 17 September 1971, is changed as follows:1. Remove old pages and insert new pages as indicated below. New or changed material is indicated by a vertical bar inthe margin of the page. Added or revised illustrations are indicated by a vertical bar adjacent to the identificationnumber.Remove pagesInsert pagesA (B blank)A (B blank)i thru iii (iv blank)i thru iii (iv blank)1-5 and 1-6 1-5 and 1-61-10.3 (1-10.4 blank) 1-10.3 (1-10.4 blank)1-11 thru 1-14 1-11 thru 1-142-10.1 (2-10.2 blank) 2-10.1 (2-10.2 blank)3-3 thru 3-6 3-3 thru 3-63-11 and 3-12 3-11 and 3-12C-5 and C-6 C-5 and C-62. File this change sheet in front of the publication for reference purposes.By Order of the Secretaries of the Army and the Navy:Official:GORDON R. SULLIVANGeneral, United States ArmyChief of StaffMILTON H. HAMILTONAdministrative Assistant to theSecretary of the Army03366RONALD D. ELLIOTTExecutive DirectorMarine Corps Systems Command

WWW.SURVIVALEBOOKS.COMDistribution:Army:To be distributed in accordance with DA Form 12-40-E, Block #0332, requirements for TM 9-1330-200-12/TM1330-12/1AMarine Corps:MARCORPS CODE: BE plus 7000159 (5)7000161 (2)

WWW.SURVIVALEBOOKS.COMCHANGE}TM 9-1330-200-12TM 1330-12/1AC11HEADQUARTERSDEPARTMENTS OF THE ARMYNO. 11 Washington, DC, 24 August 1988OPERATOR'S AND UNIT MAINTENANCE MANUALFORGRENADESTM 9-1330-200-12/OP 3833. 1 st Rev Vol 2/TM 1330-12/1A, 17 September 1971, is changed as follows:1. Remove old pages and insert new pages as indicated below. New or changed material is indicated by a vertical bar inthe margin of the page. Added or revised illustrations are indicated by a vertical bar adjacent to the identificationnumber.Remove pagesInsert pagesAAi and iii and ii3-3 and 3-4 3-3 and 3-42. File this change in front of the publication for reference purposes.By Order of the Secretaries of the Army and the Navy:CARL E. VUONOGeneral, United States ArmyChief of StaffOfficialR.L. DILWORTHBrigadier General, United States ArmyThe Adjutant GeneralJOSEPH J. WENTLieutenanet General, USMCDeputy Chief of Staff for Installations and LogisticsDISTRIBUTION:Active Army:To be distributed in accordance with DA Form 12-40A-R, Operator's and Unit Maintenance Requirements for Grenades.Marine Corps:MARCOPRS CODES: BE plus 7000159(5)7000161(2)

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12TM 1330-12/1AC10CHANGE )HEADQUARTERS) DEPARTMENTS OF THE ARMY)NO. 10 ) Washington, DC, 3 December 1993OPERATOR'S AND UNIT MAINTENANCE MANUALFORGRENADESTM 9-1330-200-12/TM 1330-12/1A, 17 September 1971, is changed as follows:1. Remove old pages and insert new pages as indicated below. New or changed material is indicated by a vertical bar inthe margin of the page. Added or revised illustrations are indicated by a vertical bar adjacent to the identificationnumber.Remove pagesInsert pagesNoneA pagei thru iii (iv blank)i thru iii (iv blank)1-5 and 1-6 1-5 and 1-6None 1-10.1 and 1-10.21-11 and 1-12 1-11 thru 1-13 (1-14 blank)2-1 and 2-2 2-1 and 2-22-10.1 (2-10.2 blank) 2-10.1 (2-10.2 blank)3-1 thru 3-6 3-1 thru 3-6None3-6.1 (3-6.2 blank)3-11 and 3-12 3-11 and 3-12C-5 and C-6 C-5 and C-62. File this change in front of the publication for reference purposes.By Order of the Secretaries of the Army and the Navy:OfficialR. L. DILWORTHBrigadier General, United States ArmyThe Adjutant GeneralJOHN A. WICKHAM, JR.General, United States ArmyChief of StaffGEORGE B. CRISTLieutenant General, USMCDeputy Chief of Staff for Installations and LogisticsDISTRIBUTION:Active Army:To be distributed in accordance with DA Form 12-40-R, Operators and Organizational Maintenance Requirements forGrenades.Marine Corps:MARCORPS CODES: BE plus 7000159(5)7000161(2)

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1ALIST OF EFFECTIVE PAGESWhen applicable, insert latest change pages and dispose of supersededpages in accordance with applicable regulations.TOTAL NUMBER OF PAGES IN THIS PUBLICATION IS 86CONSISTING OF THE FOLLOWING:Page *Change Page *ChangeNo. No. No. No.Cover 0 2-12 thru 2-15 0Inside Cover 0 2-16 0A 15 3-1 and 3-2 10B 13 3-3 and 3-4 14i thru iii 12 3-4.1 and 3-4.2 14iv blank 8 3-5 and 3-6 121-1 4 3-6.1 101-2 7 3-6.2 blank 101-3 0 3-7 and 3-8 21-4 3 3-8.1 21-5 15 3-8.2 blank 21-6 9 3-9 01-7 7 3-10 151-8 4 3-11 121-9 15 3-12 141-10 8 4-1 thru 4-3 01-10.1 and 1-10.2 10 4-4 blank 01-10.3 and 1-10.4 14 5-1 and 5-2 01-11 and 1-12 14 A-i 51-13 and 1-14 12 A-2 blank 02-1 15 B-1 and B-2 52-2 10 C-1 thru C-3 02-2.1 thru 2-2.5 8 C-4 152-2.6 blank 8 C-5 02-3 and 2-4 0 C-6 122-5 and 2-6 3 C-7 02-7 thru 2-10 0 C-8 152-10.1 12 C-9 02-10.2 blank 10 C-10 blank 02-11 15 AuthenticationPage0* Zero indicates an original page.Change 15 A

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1ATHIS PAGE INTENTIONALLY LEFT BLANKChange 13 B

WWW.SURVIVALEBOOKS.COM*TM 9-1330-200-12TM 1330-12/1ATECHNICAL MANUAL)DEPARTMENTS OF THE ARMYNo. 9-1330-200-12 ) AND NAVYTECHNICAL MANUAL)No. 1330-12/1A ) Washington, DC, 17 September 1971Operator's and Unit Maintenance ManualforGRENADESREPORTING ERRORS AND RECOMMENDING IMPROVEMENTSYou can help improve this manual. If you find any mistakes or know of a wayto improve the procedures, please let us know. Mail your DA Form 2028(Recommended Changes to Publications and Blank Forms) directly toCommander, U.S. Army Armament Research, Development and EngineeringCenter, ATTN: SMCAR-LSB, Picatinny Arsenal, NJ 07806-5000. A reply willbe furnished to you.CHAPTER 1. INTRODUCTION Paragraph PageSection I. GeneralScope.................................................................................. 1-1 1-1Forms, records and reports.................................................. 1-2 1-1Section II. Description and FunctioningGeneral .............................................................................. 1-3 1-2Hand grenades .................................................................... 1-4 1-2Rifle grenades .................................................................... 1-5 1-2Grenade, Launcher, Smoke: Screening, RP, UK L8A1,UK L8A3 ............................................................................. 1-6 1-11Grenade, Launcher, Smoke: IR Screening, M76 ................. 1-6.1 1-11Grenade, Launcher, Smoke: Simulant Screening, M82........ 1-6.2 1-11Section III. Safety, Care, and HandlingSafety ................................................................................. 1-7 1-12Care .................................................................................... 1-8 1-13Handling .............................................................................. 1-9 1-13CHAPTER 2. OPERATING INSTRUCTIONSSection I. Operating Under Usual ConditionsHand grenades .................................................................... 2-1 2-1Rifle grenades ..................................................................... 2-2 2-6Launcher grenades .............................................................. 2-2.1 2-10.1Section II. Operation of Materiel Used in Conjunction with Major ItemsGrenade projection adapters................................................ 2-3 2-11Rifle grenade cartridges....................................................... 2-4 2-13Section III. Operation Under Unusual ConditionsGeneral ............................................................................... 2-5 2-15Extreme temperature conditions .......................................... 2-6 2-15* This manual supersedes TM 9-1330-200-12/TM 1330-12/1, 18 June 1969, including all changes; and together with TM9-1330-200-34, 1 December 1971, and TM 43-0001-29, 31 October 1977, supersedes TM 9-1330-200, 17 September1971, including all changes.Change 12 i

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1ACHAPTER 3. MAINTENANCE INSTRUCTIONS Paragraph PageSection I. Service Upon Receipt of MaterielGeneral ............................................................................... 3-1 3-1Precautions ......................................................................... 3-2 3-1Unpacking ........................................................................... 3-3 3-1Section II. Tools and EquipmentCommon tools and equipment ............................................ 3-4 3-4Special tools and equipment................................................ 3-5 3-4Section III. Maintenance User-OperatorGeneral ............................................................................... 3-6 3-4Inspection............................................................................ 3-7 3-4Cleaning/preservation.......................................................... 3-8 3-6Section IV. Maintenance-OrganizationalGeneral ............................................................................... 3-9 3-10Unpacking ........................................................................... 3-10 3-10Inspection............................................................................ 3-11 3-10Touch-up and spot painting ................................................. 3-12 3-10Repacking ........................................................................... 3-13 3-11Repacking L8A1 grenades, L8A3 grenades.......................... 3-14 3-12CHAPTER 4. SHIPMENT AND STORAGESection I. ShipmentPrecautions ......................................................................... 4-1 4-1Instructions .......................................................................... 4-2 4-1Data .................................................................................... 4-3 4-1Section II. StoragePrecautions ......................................................................... 4-4 4-1Data .................................................................................... 4-5 4-1Procedures .......................................................................... 4-6 4-3CHAPTER 5. DESTRUCTION OF GRENADES TO PREVENT ENEMYUSEGeneral ............................................................................... 5-1 5-1Methods............................................................................... 5-2 5-1APPENDIX A. REFERENCES ........................................................................... A-1APPENDIX B. MAINTENANCE SUPPLIES........................................................ B-1APPENDIX C. MAINTENANCE ALLOCATION CHART (MAC)........................... C-1LIST OF ILLUSTRATIONSFigure No. Title Page1-1 Representative types of hand grenades....................................... 1-61-2 CS riot hand grenades M47......................................................... 1-71-3 Pushing safety latch to armed position (A, righthanded thrower; B,lefthanded thrower) ..................................................................... 1-81-4 Representative types of rifle grenades ........................................ 1-91-5 Grenade, Launcher, Smoke: Screening, RP UK L8A1 ................. 1-101-5a Grenade, Launcher, Smoke: Screening, RP UK L8A3 ................. 1-10.11-5b Grenade, Launcher, Smoke, IR Screening, M76.......................... 1-10.21-5c Grenade, Launcher, Smoke, Simulant Screening, M82 ............... 1-10.31-6 Ammunition pouch ...................................................................... 1-132-0 Inspection of grenades ................................................................ 2-2.1Change 12 ii

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AFigure No. Title Page2-0.1 Hand grenade packed upside down (fuze down).............................................. 2-2.22-0.2 Hand grenade packed right side up (fuze up) without safety pin andpull ring........................................................................................................... 2-2.22-1 Grenade with damaged safety lever and broken fuze lugs............................... 2-2.32-1.1 Criteria for hinge ear engagement (tips past center line and turned up) ........... 2-2.42-1.2 Fuze safety hinge ear repair............................................................................ 2-2.52-2 Screwing practice grenade body onto fuze ...................................................... 2-32-3 Assembly of safety clip to grenade M69 .......................................................... 2-42-4 Assembly of safety clip to grenade M62 .......................................................... 2-52-5 Insertion of practice charge and plastic stopper............................................... 2-72-6 Assembly of safety clip to fuzes M206 series .................................................. 2-82-7 Screwing offensive grenade body onto fuze .................................................... 2-92-8 Replacement of safety wire and safety clip...................................................... 2-102-9 Grenade projection adapter M1A2................................................................... 2-122-10 Grenade projection adapter M2A1................................................................... 2-142-11 Representative rifle grenade cartridges ........................................................... 2-153-1 Deleted ........................................................................................................... 3-23-2 Deleted ........................................................................................................... 3-23-3 Deleted ........................................................................................................... 3-23-3.1 M76 smoke grenade ammunition box.............................................................. 3-33-3.2 IR grenade box and packing............................................................................ 3-33-4 Adjustment of safety pin.................................................................................. 3-53-5 Assembly of safety clip to grenade M67 .......................................................... 3-6.13-6 Fuze seated w/safety clips .............................................................................. 3-73-6.1 Tightening fuze to insure correct seating ......................................................... 3-83-7 Acceptable and dented nose protection caps................................................... 3-8.13-8 Defective stabilizer tube and fin assembly....................................................... 3-93-9 Cleaning grenades .......................................................................................... 3-93-10 Replacement of cover and taping in place....................................................... 3-113-11 Typical outer packing and markings ................................................................ 3-113-11.1 Grenade/spacer assembly............................................................................... 3-124-1 Damaged packing box..................................................................................... 4-1Change 12 iii (iv blank)

WWW.SURVIVALEBOOKS.COMCHAPTER 1INTRODUCTIONTM 9-1330-200-12/TM 1330-12/1A1-1. ScopeInformation in this manual is limited to responsibilities ofoperator and organizational support maintenancepersonnel (i.e., maintenance not beyond the scope ofthe tools, equipment or supplies normally available tooperator and organizational personnel). Specifically,this manual contains instructions for operation;inspection; storage; packaging; and basic maintenance.The prescribed maintenance responsibilities of the directand general support level apply as reflected in themaintenance allocation chart (MAC) in appendix C ofthis manual.1-2. Forms, Records and Reportsa. General. Responsibility for execution of forms,records and reports rests upon the officers of all unitsmaintaining subject material. However, the value ofaccurate documents must be appreciated by all personsresponsible for data compilation, maintenance and use.Records, reports and authorized forms normally indicatethe type, quantity and condition of materiel to beinspected, to be repaired or to be used in repair.Properly executed forms convey authorization and serveas records for repair or replacement of materielrequiring further repair. Overall, forms, records andreports establish work required, progress of the workwithin the shops and status of the materiel uponcompletion of its repair.b. Authorized Forms. The forms generallyapplicable to units maintaining subject materiel arelisted in appendix A. For a current listing of all forms,refer to DA Pam 310-2. Refer to TM 38-750 forinstructions on use and completion of all forms requiredfor operating and maintaining hand grenades and riflegrenades.c. Field Report of Accidents. Accidents involvinginjury to personnel or damage to materiel will bereported on DA Form 285 (Accidents Report) inaccordance with AR 385-40. Marine Corps units shallreport accidents in accordance with MCO 5101.8. USNavy Units will report to Commander Naval OrdnanceSystems Command in accordance with NAVORDInstruction 8025.1B.d. Malfunctions Involving Ammunition orExplosives.(1) A malfunction is defined as the failure ofgrenade to function in accordance with the expectedperformance when fired, launched, or when explosiveSection I. GENERALChange 4 1-1components function during a nonfunctional test. Acriticalmalfunction is one which may cause a hazard in thecircumstances described above. For purposes of clarity,malfunctions do not include accidents and incidentsresulting from negligence, malpractice, or implication inother situations such as vehicle accidents, fires, etc.However, malfunctions do include abnormal orpremature function of explosive ammunition itemsduring normal handling, maintenance, storage,transportation, and tactical deployment.(2) If a malfunction involving this materieloccurs, firing of the affected lot will be haltedimmediately. The commanding officer or seniorindividual in charge of the unit will immediately contactthe officer under whose supervision the ammunition forthe unit involved is maintained or issued and will reportall available facts concerning the malfunction.(3) Ammunition malfunction reports fromArmy activities will be reported as prescribed in AR 75-1.(4) Ammunition malfunction reports fromMarine Corps activities will be reported as prescribed inMCO 8025.1.(5) Ammunition malfunction reports from USNavy activities will be reported as prescribed inNAVORD Instruction 8025. B.e. Report of Damaged or Improper Shipment. Allshipments of these munitions received in damaged orotherwise unsatisfactory condition because ofdeficiencies in preservation, packaging, marking,loading, storage, or handling will be reported on SF 364(Report of Discrepancy (ROD) in accordance with AR735-11-2. Reports of damaged or improper shipmentdue to transportation discrepancies are to be reportedon SF 361 in accordance with AR 55-38. Marine Corpsunits will submit such reports in accordance with MCO4610.5 and Military Traffic Management Regulations(NAVMC 1175).f. Equipment Improvement Recommendations.DA Form 2407 (Maintenance Request) will be used tosubmit equipment improvement recommendations(EIR's). The form will be prepared in accordance withTM 38-750.

WWW.SURVIVALEBOOKS.COM1-3. GeneralGrenades are small bombs of a size and shapeconvenient for throwing by hand or launching from a rifleor vehicle. The hand grenade is thrown by hand.However, some hand grenades may be launched from arifle grenade projection adapter and by a specialgrenade cartridge. The rifle grenade is launched by aspecial grenade cartridge from a rifle. Hand grenadesare used to supplement small arms against an enemy inclose combat, for producting a riot control agent, forsmoke screening and signaling, and for incendiarypurposes. Rifle grenades are used against armoredtargets, fortifications and personnel, and for screeningand signaling. Tables 1I and 1-2 contain a listing ofauthorized hand and rifle grenades, respectively. Table1-3 lists special type greandes.1-4. Hand Grenades.a. General. All Army hand grenades havepyrotechnic delay fuzes except for Grenades M68, M59(M33 with Fuze, M217) (M33A1), M57 and M26A2 whichare assembled with an impact-delay-type fuze. Agrenade assembled with a pyrotechnic delay fuze willnot function by impact action. A grenade assembledwith an impact-delay-type fuze will function on impactaction after an arming time of 1.6 seconds. If thegrenade fails to function on impact, the secondarypyrotechnic delay feature of the fuze will function thegrenade within 3 to 7 seconds.b. Types. There are five types of hand grenades(fig. 1-1):(1) Fragmentation hand grenades. Thesegrenades are used to produce casualties by highvelocity projection of fragment.(2) Illuminating hand grenade. This grenadeis used to provide illumination of terrain and targets.(3) Chemical hand grenades. Thesegrenades are used for incendiary, screening, signaling,training or riot control purposes.(4) Offensive hand grenade. This grenade isused for blast effect.(5) Practice and training hand grenades.These grenades are for training personnel in use, careTM 9-1330-200-12/TM 1330-12/1ASection II. DESCRIPTION AND FUNCTIONINGChange 7 1-2and handling of service grenades. Model designationsof the grenades are indicated in table 1-4.c. Functioning.(1) General. Release of the safety clip andremoval of the safety pin permit release of the safetylever. When the grenade is thrown, the safety lever isreleased and is forced away from the grenade body by astriker acting under the force of a striker spring. Thestriker rotates on its axis, and then strikes thepercussion primer, initiating the fuze. The grenade thenfunctions within the time shown in table 1-4.(2) Grenades M47 (fig. 1-2) and M48.Grenade fuze M227 is restrained from functioning by thesafety cotter pin, sliding safety latch, and handle. Theexhaust port seal is removed and discarded immediatelybefore pulling the safety cotter pin. When the safetycotter pin is removed and the safety latch is pushedrearward (fig. 1-3) from the lock pin, the handle isunlocked and the GRENADE IS ARMED. Releasing thehandle causes the arming pin spring to eject the armingpin. This releases the firing pin, allowing the firing pin toactivate the primer. The primer ignites the first-firemixture, which flashes and ignites the delay mixture.This, in turn, ignites the ignition mixture. The ignitionmixture burns through an aluminum foil shield on thebottom of the fuze and ignites the granulated CSpyrotechnic mixture in the grenade body. The burningmixture builds up pressure and opens the tape coveringthe exhaust port. This pressure also forces release ofCS from the grenade, while jet action causes thegrenade to move quickly and erratically along theground. The M48 functions in the same manner as theM47, except that the M48 emits red smoke.1-5. Rifle Grenadesa. General. Rifle grenades (fig. 1-4) are finstabilized.They are launched from a rifle. Thepropelling force for the grenade is provided by a specialgas-producing grenade cartridge, which is loaded intothe rifle chamber. Rifle grenades

WWW.SURVIVALEBOOKS.COMTable 1-1. Authorized Hand GrenadesTM 9-1330-200-12/TM 1330-12/1ADescriptionModeldesignationDODAC Color coding Use FuzemodeldesignationIssue with safetyclipFragmentation, delay M67 1330-G881 Olive drab w/yellow Produces casualties by M213 Requiredmarkings high-velocity offragmentsFragmentation, delay M33 1330-G888 Olive drab w/yellow Produces casualties by M213 Not requiredmarkingshigh-velocity offragmentsFragmentation, delay M61 1330-G880 Olive drab w/yellow Produces casualties by M204A Requiredmarkings high-velocity of M204A2fragmentsFragmentation, delay M26A1 1330-G890 Olive drab w/yellow Produces casualties by M204A1 Not requiredmarkings high-velocity of M204A2fragmentsFragmentation, delay M26 1330-G890 Olive drab w/yellow Produces casualties by M204A1 Not requiredmarkings high-velocity of M204A2fragmentsFragmentation, delay Mk2 1330-G890 Olive drab w/yellow Produces casualties by M204A1 Not requiredband around fuze high-velocity of M204A2Fragmentation,impactFragmentation,impactFragmentation,impactFragmentation,impactwell.fragmentsM68 1330-G802 Olive drab w/yellow Produces casualties by M217 Requiredmarkings high-velocity offragmentsM59 (M33 1330-G887 Olive drab w/yellow Produces casualties by M217 Not requiredw/Fuze, markings high-velocity ofM217) fragments(M33A1)M57 1330-G896 Olive drab w/yellow Produces casualties by M217 Requiredmarkings high-velocity offragmentsM26A2 1330-G889 Olive drab w/yellow Produces casualties by M217 Not requiredmarkingshigh-velocity offragmentsOffensive Mk3A2 1330-G911 Black w/yellow Blast effect or demolition M206A2 With or withoutw/Fuze markings safety clip1330-G910w/o FuzeIlluminating Mk1 1330-G895 All white orunpaintedw/whitew/blackmarkingsbandIllumination and signaling Integral Not requiredincendiary purposesagainst flammabletargets1-3

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1ATable 1-1. Authorized Hand Grenades-ContinuedDescription ModeldesignationDODAC Color coding Use Fuze modeldesignationIssue withsafety lipRiot, CN M7, M7A1 1330-G960 Gray w/1 red band and Control riots, mobs and M201A1 NotrequiredM7A2 red markings other disturbancesRiot, CS M7A3 Gray w/red band and other disturbancesred markingsRiot, CS M47 1330-G922 Gray w/red band black Control riots, mobs and M227 Notrequiredmarkingother disturbancesSmoke, HC AN-M8 1330-G930 Light green w/black Generate white smoke for M201A1 Notrequiredmarkingssignalling and screeningRiot, Pocket CS XM58 1330-G933 Gray w/red band and Simulate casualty agents 201AE1 Notrequiredred markings during trainingRiot, CS1 ABC-M25A2 1330-G928 Gray w/red band and Simulate casualty agents Integral Notrequiredred markings during trainingRiot, CN1 ABC-B25A1 1330-G927 Gray w/red band and Simulate casualty agents Integral Notrequiredand ABC- red markings during trainingM25A28 to 12 Second Delay M54 1330-G923 Gray w/red band and Simulate casualty agents M226 NotrequiredCS red markings during trainingSmoke, WP M34 1330-G937 Light green w/1 yellow Signaling, Screening and M206A2 RequiredHand-Rifle band, light red mark- Incendiary purposesingsSmoke, WP M15 1330-G935 Gray w/1 yellow band Signaling, screening and M206A1 Notrequiredand yellow markings incendiary purposes M206A2Smoke, colored (red, M18 1330-G950 Light green w/black Ground to air or ground M201A1 Notrequiredgreen, yellow or (red) markings to ground signalingviolet) 1300-G940(green)1330-G945(yellow)1330-G955(violet)Smoke, red, RS M48 1330-G932 Light green w/black Training M227 Notrequired.markingIncendiary, TH3 AN-M14 1330-G900 Light red w/black Provides a source for in- M201AI Notrequired.markingtense heat to destroyequipmentChange 3 1-4

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1ATable 1-1. Authorized Hand Grenades - ContinuedDescription Model DODAC Color coding Use Fuze model Issue withDesignation designation safety clipPractice, delay M69 1330-G918 Blue w/brown band w/ Training M228 Requiredwhite or no markingsPractice, delay M62 1330-G914 Blue w/brown band w/ Training M205A1 Requiredwhite or no markingsM205A2Practice, delay M30 1330-G915 Blue w/brown band w/ Training M205A1 Notwhite or no markings M205A2 requiredTable 1-2. Authorized Rifle GrenadesDescription Model DODAC Color coding Use Fuze ModelDesignationdesignationHEAT M31 1330-G970 Olive drab w/yellow Penetrating effect M211markingagainst targetsSmoke, WP M19A1 1330-11030 Light green w/yellow Signaling,Integralscreening,band, red marking ignites frommobile targetsSmoke (red, M22 or 1330-11010 (red) light green w/color Signaling and for Integralgreen, violet M22A2 1330-G095 (green) of smoke produced laying screenor yellow) 1330-H020 (violet) painted on body1330-1035 (yellow) union; black markingTable 1-3. Special Type GrenadesDescription Model DODAC Color coding Use Fuze modelDesignationdesignationLauncher, Smoke RP, UK L8A1 1330-G815 Light green base w/brown To provide a self- IntegralScreening or UK L8A3 band painted on base; screening smoke (F92brown marking capability for combat electricvehiclesfuze)Grenade, M76 1330-G826 Light green base w/1 To provide a self- NALauncher yellow band; black screening infraredSmoke: IR marking smoke capability forScreeningcombat vehiclesGrenade, M82 1330-G978 Light green base w/1 To provide a training NALauncher, yellow and 2 blue self-screeningSmoke: bands; black marking capability for combatSimulantvehiclesScreeningGrenade, Hand: M83 TBD Forest green w/light Practice M201A1Smoke, TA,green marking andPracticeblue bandChange 15 1-5

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1Amay be used against armored targets, againstpersonnel, for screening or signaling, or for incendiaryeffect against flammable targets. Rifle grenades maybe fired at low angles (direct fire) or high angles (indirectfire), depending on the type of grenade being fired andeffect desired.b. Types. There are three types of rifle grenadescurrently available:(1) Antitank (AT) rifle grenades. thesegrenades are used against armored targets orfortifications. The grenade contains a shaped chargecapable of penetrating up to 10 inches of armor plate or20 inches of reinforced concrete at an effective range of115 meters.(2) Chemical rifle grenades. These grenadesare used primarily for screening or signaling purposes.In addition, the WP grenade can also be used forincendiary effect against flammable targets or to inflictinjury. Chemical rifle grenades function either uponimpact with targets, to produce clouds of smoke, orupon projection, to produce a long train of smokethrough the air.(3) Practice rifle grenades. These grenadesare used for training personnel in care, handling, anduse of service rifle grenades.Figure 1-1. Representative types of hand grenades.Change 9 1-6

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AFigure 1-2. CS riot hand grenade M47.Change 7 1-7

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AFigure 1-3. Pushing safety latch to armed position (A, righthanded thrower; B, left-handed thrower).Change 4 1-8

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1ATable 1-4. Time to Grenade Functioning after Release of Safety LeverGrenadeType Model(s) Time(seconds)High explosives:Fragmentation M67, M33, M61, M26A1, M26, Mk2 4 -- 5M68, M59, (M33 w/Fuze, M217), (M33A1), M57, M26A2 Impact or 3 - 7Offensive Mk3A2 4--5Illuminating Mk1 7Chemical:Smoke M34, M15 4 -5Smoke, HC &Colored M18, AN-M8 0.7-2Smoke, RS M48 5-25Riot, CN M7, M7A1 0.7-2Riot, CSXM58, M7A2, M7A3CS M47 5-25CN1 ABC-M25A1, ABC-M25A2 1.4-3Riot, CS1ABC-M25A2CS M54 8-12Incendiary AN-M14 0.7-2Practice:for HE M69, M62, M30 4-5Riot, Simulant M25A2 1.4 - 3Figure 1-4. Representative types of rifle grenades.Change 7 1-9

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AFigure 1-5. Grenade, Launcher, Smoke: Screening, RP, UK,L8A1Change 8 1-10

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AFigure 1-5a. Grenade, Launcher, Smoke: Screening, RP, UK L8A3Change 10 1-10.1

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AFigure 1-5b. Grenade, Launcher, Smoke, IR Screening, M76.Change 10 1-10.2

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AFigure 1-8. Grenade, launcher, Smoke: Simulant Screening, M82.Change 14 1-10.3

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1ATHIS PAGE INTENTIONALLY LEFT BLANK1-10.4 Change 14

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1A1-6. Grenade, Launcher, Smoke:Screening, RP, UK, L8A1, L8A3a. General. Provides a self-screening smokecapability for armored tactical vehicles.(1) Screen vehicles from enemy direct fireweapons when immediate counter-engagement cannotbe accomplished.(2) Conceal vehicles caught out in the openwhich cannot rapidly find a defilade position.(3) Screen vehicles caught out in the openduring retrograde.vehicle.(4) Extricate the crew from a disabledb. Description. The L8A1 grenade (fig. 1-5) and theL8A3 grenade (fig. 1-5a) are used with M239 andsimilar grenade launchers. The grenades are filled witha red phosphorus/butyl rubber mix. Each grenade isapproximately 2-5/8 inches in diameter, 7-9/32 incheslong, and weighs approximately 1-1/2 pounds.c. Functioning. The L8A1 and L8A3 grenades arepropelled from the launching device when electricalcurrent at the firing clip activates the electrical squibtypefuze which ignites the propellant charge. Pressurebuilds up in the metal base, escapes through thepropulsion holes, ignites the delay composition, andpropels the grenade from the launching device. Duringflight of the grenade, the delay composition burns for 3/4of a second for the L8A1 and 1 second for the L8A3grenade, and ignites the burster charge. The burstercharge ignites the red phosphorus/butyl rubber smokecomposition and ruptures the rubber grenade body. Theignited smoke composition disperses to produce a whitesmoke cloud within two seconds after firing atapproximately 98 feet (30m) from the launching device.When functioned, the L8A3 grenade generates a smokecloud faster and more dense than the L8A1. The smokecloud lasts for more than 2 minutes for both the L8A1and L8A3 grenades.1-6.1. Grenade, Launcher, Smoke: IRScreening, M76a. General. Provides a self-screening infraredsmoke capability for armored tactical vehicles.(1) Screen vehicles from enemy direct fireweapons when immediate counter-engagement cannotbe accomplished.(2) conceal vehicles caught out in the openwhich cannot rapidly find a defilade position.(3) Screen vehicles caught in the open duringretrograde.vehicle.(4) Extricate the crew from a disabledb. Description. The M76 grenade (fig. 15b) isused with M250 and similar grenade launchers. Eachgrenade is 2.59 inches in diameter, 9.3 inches long, andweighs approximately 4 pounds.c. Functioning. The M76 grenade is propelledfrom the launching device (discharger) when electriccurrent at the firing contact activates the electricalmatch. The electrical match ignites the propellant whichlaunches the grenade and ignites the pyrotechnic timedelay. Launch acceleration causes the setback lock todisplace aft, out-of-engagement with safe and armslider. When the slider/bore rider clears the launchtube, it moves into the armed position which aligns theexplosive lead with the delay detonator and the boosterlead. When the grenade reaches the desired range, thedelay detonator ignites the explosive train whichdetonates the central burster. The IR composition isscattered which creates the brown obscuring cloud.1-6.2. Grenade, Launcher, Smoke:Simulant Screening, M82a. General. Provides a self-screening trainingcapability for armored tactical vehicles.(1) Screen. vehicles from enemy direct fireweapons when immediate counter-engagement cannotbe accomplished.(2) Conceal the vehicles caught out in theopen which cannot rapidly find a defilade position.(3) Screen vehicles caught in the open duringretrograde.vehicle.(4) Extricate the crew from a disabledb. Description. The M82 grenade (fig. 1-5c) isused with M250 and similar grenade launchers. Eachgrenade is 2.6 inches in diameter, 9.3 inches long, andweighs approximately 3.1 pounds.c. Functioning. The M82 grenade is propelledfrom the launching device (discharger) when electriccurrent at the firing contact activates the electricalmatch. The electrical matchChange 14 1-11

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1Aignites the propellant which launches the grenade andignites the pyrotechnic time delay. Launch accelerationcauses the setback lock to displace aft, out-ofengagementwith safe and arm slider. When theslider/bore rider clears the launch tube, it moves into thearmed position which aligns the explosive lead with thedelay detonator and the booster lead. When thegrenade reaches the desired range, the delay detonatorignites the explosive train which detonates the centralburster. The smoke composition is scattered whichcreates the white obscuring cloud. The smoke cloudlasts for approximately 45-60 seconds.Section III. SAFETY, CARE AND HANDLING1-7. SafetyWARNINGTO PRECLUDE SAFETY HAZARD,NEVER MAKE UNAUTHORIZEDMODIFICATIONS TO GRENADES.a. Observe precautions generally applicable to useof ammunition. Do not open grenade containers orremove protective safety devices until just before use.b. Return all grenades prepared for firing but notfired to their original packing, and mark themappropriately.c. When working with WP items, the followingprecautions apply:WARNINGWP SMOKE IS POISONOUS UPONPROLONGED OR REPEATED INHALATION,PARTICULARLY IN CONFINED SPACE.NORMAL CONCENTRATIONS IN OPEN AIRARE NOT LIKELY TO BE HARMFUL.(1) Familiarize personnel with first aidprocedures for WP burns. Wet particles of WP withwater or 5 percent copper sulfate solution; removeparticles from flesh immediately.WARNINGDO NOT WASH EYES WITH 5 PERCENTCOPPER SULFATE SOLUTION. WASH EYESIMMEDIATELY WITH A PREPAREDSOLUTION OF 1 PERCENT COPPERSULFATE. IF THIS SOLUTION IS NOTAVAILABLE, WASH EYES WITH LARGEQUANTITIES OF WATER FOR AT LEAST15 MINUTES. IN ANY EVENT, SEEKMEDICAL ATTENTION.(2) Do not use grease or ointments on WPburns. (Such use may result in poisoning.) Washaffected area with soda solution, then with 5 percentcopper sulfate solution.d. When exposed to red phosphorus (RP) orhexacloroethane (HC) smoke or any riot control agent,the following precautions apply:WARNING• RP SMOKE, HC SMOKE, OR ANY RIOTCONTROL AGENT MAY PRESENT ANINHALATION AND IRRITANT HAZARD.PROLONGED EXPOSURE OF THE EYESAND RESPIRATORY SYSTEM SHOULDBE AVOIDED. WEAR PROTECTIVEMASKS TO AVOID EXCESSIVEEXPOSURE.• THE M47/XM47E3 AND M48/ XM48E3HAND GRENADES PRESENT A RISK OFSERIOUS EYE INJURY IF THEYFUNCTION IN THE HANG FIRE (DELAY)MODE. A LONGTERM HANGFIRE(DELAY) IS POSSIBLE.• SAFETY PROTECTION EQUIPMENTMUST BE WORN BY PERSONNEL WHENAPPROACHING THROWN M47/ XM47E3AND M48/XM48E3 GRENADES, AS IT ISEXTREMELY DIFFICULT TO DISTIN-GUISH BETWEEN A FUNCTIONED, DUD,OR HANGFIRE GRENADE.1-12 Change 14

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AWARNINGWHEN USING THE M47/XM47E3 ANDM48/XM48E3 HAND GRENADES, THEFOLLOWING PRECAUTIONS MUST BETAKEN:1. ADEQUATE EYE PROTECTION SHALLBE WORN BY TARGETED/OPPOSINGFORCE PERSONNEL DURING BOTHAGENT AND CIVIL DISTURBANCETRAINING EXER-CISES.2. ADEQUATE EYE PROTECTION SHALLBE WORN BY PERSONNEL DETAILEDTO HANDLE DUDS/POSSIBLE HANGFIRES AND CLEAR TRAINING/DEMONSTRATION/CIVIL DISTURBANCEOPERATION SITES.3. TRAINING SITES AND CIVILDISTURBANCE OPERATIONS SITESSHOULD BE CLEARED OF EXPENDEDGRENADES AS SOON ASPRACTICABLE.NOTE• All personnel must wear the followingeye protection equipment:1. All targeted/opposing force personnelmust wear the M17/M17A1 fieldprotective mask with eye piece outsertsinstalled and face shield, plastic, riotcontrol, NSN 4240-00-412-0512.2. Site clearance personnel must wear theabove specified equipment. Whenprotective mask/ face shield are eithernot available or their use is operationallyunacceptable, safety glasses with sideshields or safety goggles may be worn.The use of an industrial face shield asadditional face protection isrecommended. Only those devicesmeeting the ANSI Z87.1-1979, orequivalent standards, are acceptable.• Do not use smoke grenades in enclosedor confined areas.• Smoke grenades produce heat and are afire hazard.1-8. Carea. Keep grenades and components serviceableand ready for immediate issue and use.b. Keep all grenades and containers clean, dry andprotected from damage.c. Do not disassemble grenades or explosivecomponents without specific authorization.d. Store grenades and fuzes in original containersin a dry, well ventilated place protected from direct raysof sun and other sources of excessive heat.1-9. HandlingWARNINGNEVER CARRY HAND GRENADESSUSPENDED BY SAFETY PULL RING ORSAFETY CLIP.a. Handle grenades and components with care atall times. Particularly, prevent damage to stabilizerassembly of rifle grenade.b. Handle all grenades and components aspotentially dangerous, even training items or thosedesignated inert.c. Do not handle grenades by pull ring attached tosafety pin or fuze.d. Carry hand grenades in ammunition pouch (fig.1-6). (This pouch can carry five fragmentation handgrenades. Two grenades are strapped by the loop andthree additional grenades are carried inside the pouch.)Change 12 1-13

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AFigure 1-6. Ammunition pouch.1-14 Change 12

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1A2-1. Hand GrenadeWARNING• GRENADES M67, M33, M61, MB6A1, M26,MK2 MK3A2, MK1, M34, M15, M54, M69,M62, M30. IF ANY OF THESEGRENADES ARE ACCIDENTALLYDROPPED AFTER REMOVAL OFSAFETY CLIP AND SAFETY PIN ORSAFETY PIN, IMMEDIATELY PICK UPGRENADE AND THROW IT INTO SAFEAREA.GRENADES M68, M59 (M33 WIFUZE, M-217) (M33A]), M57, M26A2. IF ANY OFTHESE GRENADES ARE ACCIDENTALLYDROPPED AFTER REMOVAL OFSAFETY CLIP AND SAFETY PIN ORSAFETY PIN, IMMEDIATELY PICK UPGRENADE AND THROW IT INTO SAFEAREA. NEVER KICK OR THROWGRENADE INTO SUMP OR DITCH.WHEN THROWING, GUARD AGAINSTBUMPING ARM OR HAVING GRENADEHIT ANY OBSTACLE.GRENADES M18, AN-M8, M7, M7A I, XM-58, M7A2, M7A3, ABC-M25AI, ABC-M25A2AND AN-M14, M25A2, M47, AND M48.NEVER PICK UP THESE GRENADES IFDROPPED AFTER REMOVAL OFSAFETY. PIN. PERSONNEL SHALLMOVE IMMEDIATELY TO SAFE AREA.NEVER RELEASE HANDLE PRIOR TOTHROWING GRENADE.• THE M47/XM47E3 AND M48/ XM48E3HAND GRENADES PRESENT A RISK OFSERIOUS EYE INJURY IF THEYFUNCTION IN THE HANG FIRE(DELAY) MODE. A LONG TERM HANGFIRE (DELAY). IS POSSIBLE. SAFETYPROTECTION EQUIPMENT MUST BEWORN BY PERSONNEL WHENAPPROACHING THROWN M47/XM47E3AND M48/ XM48E3 GRENADES AS IT ISEXTREMELY DIFFICULT TODISTINGUISH BETWEEN AFUNCTIONED, DUD, OR HANG FIREGRENADE.CHAPTER 2OPERATING INSTRUCTIONSSection I. OPERATION UNDER USUAL CONDITIONSChange 13 2-1• WHEN USING THE M47/XM47E3 ANDM48/XM48E3 HAND GRENADES, THEFOLLOWING PRECAUTIONS MUST BETAKEN:1. ADEQUATE EYE PROTECTION SHALLBE WORN BY TARGETED/OPPOSINGFORCE PERSONNEL DURING BOTHAGENT AND CIVIL DISTURBANCETRAINING EXERCISES.2. ADEQUATE EYE PROTECTION SHALLBE WORN BY PERSONNEL DETAILEDTO HANDLE DUDS/POSSIBLE HANDFIRES AND CLEAR TRAINING/DEMONSTRA-TION/CIVIL DISTURBANCEOPERA-TIONS SITES.3. TRAINING SITES AND CIVILDISTURBANCE OPERATIONS SITESSHOULD BE CLEARED OF EXPENDEDGRENADES AS SOON ASPRACTICABLE.• HC SMOKE CAN BE TOXIC IN HIGHCONCENTRATIONS. SEVERE RESPIR-ATORY DISTRESS OR EVEN DEATHCAN RESULT. ALL PERSONNEL WILLHAVE A PROTECTIVE MASKIMMEDIATELY AVAILABLE BEFORESMOKE IS USED AND SHOULD MASK IFEXPOSED TO ANY CONCENTRATIONOF SMOKE.NOTEAll personnel must wear the following eyeprotection equipment:1. All targeted/opposing force personnelmust wear the M17/M17A1 fieldprotective mask with eye piece outsertsinstalled and face shield, plastic, riotcontrol, NSN 4240-00-412-0512.2. Site clearance personnel must wear theabove specified equipment. Whenprotective mask/face shield are either notavailable or their use is operationallyunacceptable, safety glasses with sideshields tun safety goggles may be worn.The use of an industrial face shield asadditional face protection isrecommended. Only those devicesmeeting' with ANSI Z87.1-1979, orequivalent standards are acceptable.

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AFigure 2-0. Inspection of grenades. AR1000976Change 8 2-2.1

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AFigure 2-0.1 Hand grenades packed upside down (fuze down). MU-D5 2547Figure 2-0.2. Hand grenades packed right side up (fuze up) without safety pin and pull ring. MU-D5 26272-2.2 Change 8

WWW.SURVIVALEBOOKS.COMReplace cover, and tape in place. Identifydefect(s) and return container to ammunitiondisposal personnel.(g) Remove grenade from containerand inspect for obvious defects,(e.g., cracked grenadebody, broken fuze lugs, damaged safety lever (fig. 2-1),damaged safety pins or pull rings, damaged safety clips(when installed) and loose fuzes, which would impairfunctioning or present a safety hazard in handling.Dispose of defective grenades as indicated inWARNING, above.NOTEIf the grenade safety clip (when installed) isnot in position, secure it in position asindicated in paragraph 3-7a(7).NOTESave some packaging material for repackingof unused items; also, save components ofcontainers in order to repack retained items.Send excess packaging material toorganizational maintenance for their use.(h) Following criteria are applicable tofuze safety lever hinge ear engagement (fig. 2-1.1).Inspection shall be made with safety clip and safety pinin place. Defective items shall be referred toorganizational support personnel for corrective action.missing.1. Either of the two hinge ears2. Body lug damaged.3. Hinge ear that does not appear toextend beyond the vertical center line of fuze body lug.4. Hinge ear that does not appear toterminate in an upward direction.(i) If defects listed in 3 or 4 above areevident, restore ears to their original position aroundlugs using an improvised non-metallic tool(approximately 1/8 in. thick, Y2 in. wide, 6 in. long) (fig.2-1.2). If defects listed 1, 2, 3, and 4 are nonrepairabledispose of as indicated in WARNING, (para 2-lb()).(2) Practice hand grenades are furnished unassembled.WARNINGNever attempt to use grenade body whichhas any sign of metal failure.(a) Inspect practice grenade body forforeign matter in body cavity or in openings. Also,inspect for signs of metal failure (cracks or bulges).(b) Assure that port hole in base ofbody is not blocked.(c) Return defective practice grenadebodies to ammunition supply personnel for disposition.Change 8 2-2.3TM 9-1330-200-12/TM 1330-12/1AFigure 2-1. Grenade with damaged safety lever andbroken fuze lugs.WARNINGNever attempt to remove any grenade fuzefrom its packing if safety pin is missing.Identify defect(s), replace packing and returnfuze to ammunition supply personnel fordisposition. Never handle fuzes by pullrings or by grasping detonator assembly.(d) Remove fuze from packing andinspect for deformation, cracks, or corrosion.WARNINGWhen assembling fuze to body of grenade,do not face port hole toward personnel, orcover with hand.(e) Holding fuze in one hand, screwbody onto fuze (fig. 2-2). Assure that fuze is firmlyseated on grenade neck.NOTEThe hand grenade safety clip (wheninstalled) is assembled to the grenade andpositioned around the safety lever. With thesafety dip positioned on the grenade, thesafety lever will not be released if the safetypin is accidentally removed. The safety dipis a supplement.

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AFigure 2-1.1. Criteria for hinge ear engagement (tips past center line and turned up.)2-2.4 Change 8

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1Atary device to the safety pin. It is not asubstitute for the safety pin.(f) safety clip on Grenade M69 asshown in figure 2-3.(g) Assemble safety clip for GrenadeM62 as follows:1. Pick up safety clip by the handleand slide on lever, as show in 1, figure 2-4.2. Press loop portion around washerunder fuze (2, fig. 2-4)3. Snap safety clip handle around fuzesafety lever in 3, figure 2-4.Figure 2-1.2. Fuze safety hinge ear repair.Change 8 2-2.5 (2-2.6 blank)

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1st Rev. Vol 2/TM 1330-12/1AFigure 2-2. Screwing practice grenade body onto fuze.2-3

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1st Rev. Vol 2/TM 1330-12/1AFigure 2-3. Assembly of safety clip to grenade M69.NOTEUse of practice charge and stopper isoptional with Grenades M30 and M62.Neither is used with Grenade M69.WARNINGWhen practice charges are used, neverinsert more than one charge into grenade.Do not substitute any other explosive forauthorized practice charge.2-4

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1st Rev. Vol 2/TM 1330-12/1A Ch 3Figure 2-4. Assembly of safety clip to grenade M62.Change 3 2-5

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1st Rev. Vol 2/TM 1330-12/1A Ch 3(h) Carefully insert one practice handgrenade charge in body through opening in bottom (A,fig. 2-5). Insert stopper in hole in base of body (B, fig.2-5).(3) Offensive hand grenades furnishedunassembled. (Navy only)(a) Remove grenade from containerand inspect for obvious defects (e.g., cracks, cuts orgouges, damaged threads, splits or indentations) whichwould preclude use. Identify defect(s), and turn grenadein to ammunition supply personnel for disposition.(b)WARNINGNever attempt to remove any grenade fuzefrom its packing if safety pin is missing.Identify defect(s), and return fuze toammunition disposal personnel.Remove fuze from its packing and inspect fordeformation, cracks, thread damage and corrosion.Dispose of defective fuzes as indicated in WARNING,above.(c)CAUTIONNever handle or carry fuzes by holding thedetonator. Handle and carry holding fuzebody only.Assure that safety clips used with offensive handgrenade are assembled to fuze prior to assembly of fuzeto grenade.(d) To assemble safety clip to FuzeM206 Series, hold fuze body between thumb and fingerswith pull ring up and detonator pointing away fromoperator. Pick up safety clip and handle with closed endof loop toward operator and proceed as follows:1. Pass open end of loop overdetonator and onto thread of fuze body (1, fig. 2-6).2. Press loop of safety clip aroundfuze washer with tab of loop against fuze body (2, fig.2-6).3. Rotate clip handle over safety lever(3, fig. 2-6).(e) Holding fuze in one hand, screwbody onto fuze (fig. 2-7).NOTESafety clip must not bind under washer afterassembly.c. Operation. Prepare hand grenades for throwingas follows:WARNINGIn throwing grenades, avoid hittingobstacles which can cause grenade tochange course or bounce back. Rolling orbouncing Grenades M68, M59 (M33 w/FuzeM217) (M33A1), M57, M-26A2 toward targetwill detonate grenade approximately 1second after handle is released.WARNINGRequire personnel handling grenades M47or M48 to use field protective masks. Avoidthrowing grenades M47 and M48 at targetsof flammable material.(1) Hold grenade in throwing hand with thumbholding safety lever (arming sleeve on Riot ControlAgent Grenades ABC-M25A1, ABCM25A2) firmlyagainst grenade body.(2) Release safety clip when installed byusing thumb of free hand.WARNINGDuring release of safety clip (when installed)and removal of safety pin, hold safety leverfirmly in place until grenade is thrown,tossed, or placed in position. (Failure tohold safety lever firmly in place may result inrelease of fuze striker and subsequentfunctioning of grenades.)(3) With free hand, pull safety pin, holdinggrenade safety lever tightly against grenade body ormaintaining pressure on arming sleeve of chemicalGrenades ABC-M25A 1 and ABC-M25A2.d. Prepared for Use. When the safety clip (wheninstalled) has been released and the safety pinremoved, the grenade is armed and must be thrown.Never attempt to replace the safety pin.2.2. Rifle Grenadesa. Precautions.(1) Use only prescribed rifle-launchercartridgecombination, as shown in applicable rifleoperator manuals, to launch rifle grenades.(2) Always check rifle to assure that itcontains no service ammunition.(3) Do not fire rifle grenade over heads offriendly troops.(4) Never place rifle grenade on launcherunless grenade is to be fired immediately.(5) Remove safety wire from Grenade M 19-A I and safety clip from Grenade M22 Series just prior tofiring. Retain safety clip or wire. Replace safety wire inM19A1 (A, fig. 2-8) or safety clip in M22 Series (B, fig.2-8) if grenades are not fired.2-6 Change 3

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev. Vol 2/TM 1320-12/1AFigure 2-5. Insertion of practice charge and plastic stopper2-7

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev. Vol 2/TM 1320-12/1AFigure 2-6. Assembly of safety clip to fuzes M206 series.2-8

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev. Vol 2/TM 1320-12/1AFigure 2-7. Screwing offensive grenade body onto fuze.(6) Remove tape from vent in nose of SmokeRifle Grenade M23 Series just prior to firing. Replacetape if grenade is not fired.(7) Do not puncture or disassemble riflegrenades.b. Preparation for Use.(1) Remove container from packing box.(2) Open container and remove rifle grenade.(3) See that safety wire in Grenades M19A1and safety clip on Grenades M22 Series are in place. Ifsafety wire or safety clip is not in place, but available,install as indicated in figure 2-8. If safety wire or safetyclip is not available, leave grenade in place and contactauthorized disposal personnel for disposition.(4) Inspect Rifle Grenades M31 for conditionof nose protector cap. If cap is dented, return grenadeto ammunition supply personnel for disposition.(5) Inspect stabilizer tube and fin assembly.If either is dented or deformed, return grenade toammunition supply personnel for disposition.c. Operation. For rifle grenade firing procedures,refer to applicable rifle operator manuals. For tacticaluse of rifle grenades, refer to FM 2330.2-9

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev. Vol 2/TM 1320-12/1AFigure 2-8. Replacement of safety wire and safety clip.2-10

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev. Vol 2/TM 1320-12/1A2.2.1. Launcher GrenadesWARNING• A PHOSPHINE GAS ATMOSPHEREIS GENERATED FROM THESMOKE MIX IN L8A1 AND L8A3GRENADES. AS A RESULT, THEFOLLOWING SAFETY HANDLINGGUIDANCE IS TO BE OBSERVED.STORE ALL L8A1, L8A3GRENADES IN A VENTILATEDAREA OR MAGAZINE. STORAGEMAGAZINES CONTAINING THESEGRENADES SHALL BE OPENEDAND ALLOWED TO VENTILATETHREE TO FIVE MINUTES PRIORTO ENTRY BY PERSONNEL.THESE GRENADES SHALL ONLYBE UNPACKED OUT OF DOORSOR IN A WELL VENTILATED AREA.DO NOT OPEN STORAGECONTAINERS IN THE VICINITY OFAN OPEN FLAME OR FLAMEPRODUCING DEVICES.• WHEN FIRING L8A1, L8A3GRENADES INTO A STRONGHEADWIND, A MINIMUM SAFEDISTANCE OF 125 METERS FORPERSONNEL OUTSIDE THEVEHICLE SHOULD BEMAINTAINED. IF THIS DISTANCECANNOT BE MAINTAINED,PERSONNEL MUST BEPROTECTED FROM REDPHOSPHOROUS FRAGMENTSHITTING BARE SKIN (I.E., LONGSLEEVES, HEAD AND FACEPROTECTION, AND HANDPROTECTION). CLOTHING WILLFIT SNUGLY TO PREVENT REDPHOSPHORUS FROM GETTINGINSIDE.a. Precautions.(1) Handle grenades with care, avoiddamage, and observe normal safety precautions.(2) Do not disassemble grenades or makeunauthorized modifications.b. Preparation For Use.(1) Cut steel strapping with shears.(2) Remove metal ammunition box.(3) Open metal box.(4) Remove packing and grenades.NOTESave some packing material forrepacking of unused items.(5) Inspect each grenade in accordance withthe requirements of paragraph 3-7c prior to use.NOTEThere are no repair parts for theL8A1, L8A3, M76, or M82 grenades.c. Operation. Refer to the appropriate operator'smanual for operational procedures.Change 12 2-10.1 (2-10.2 blank)

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev. Vol 2/TM 1320-12/1ASection II. OPERATION OF MATERIEL USED IN CONJUNCTION WITH MAJOR ITEMS2-3. Grenade Projection Adaptersa. Applications. Grenade projection adapters aredevices designed to adapt hand grenades forlaunching from rifles assembled with grenade launchers,thus extending their range. Grenade projection adaptersconsist of a stabilizer tube with a fin assembly on oneend and gripping claws on the other end. The claws, ofspring steel, grip the hand grenade and hold it in placeon the adapter. Grenade projection adapters may beused with service and practice hand grenades asindicated in table 2-1.Table 2-1. Grenades Used with Grenade ProjectionAdaptersGrenade projection adapterM1M1A1 & M1A2M2 & M2A1GrenadesGrenade, Hand: Fragmentation,Mk2Grenade, Hand: Illuminating,Mk1Grenades, Hand: Fragmentation,M61, M26A1, M26, Mk2,M62, M30Grenade, Hand-Rifle: Smoke,WP, M34Grenade, Hand: Riot, CN, M& M7A1Grenade, Hand: CS, ABC-M7A2and ABC-M7A3Grenade Hand: Smoke, HC,AN-M8Grenade, Hand: Incendiary,TH3, AN-M14Grenade, Hand: 8 to 12 SecondDelay, CS, M54Grenade, Hand: Colored Smoke(Red, Green, Yellow or Violet)M18NOTEHand Grenades M68, M59 (M33 w/Fuze M217)(M33A1), M57, M26A1 are not to be launchedfrom a rifle.b. Precautions. In addition to precautions list ed inparagraph 2-la, and the precautions listed for particulargrenade to be used, observe following precautions inlaunching grenade projection adapters assembled withhand grenades: (1) Never release safety clip andremove safety pin from hand grenade until just beforefiring.(2) When safety clip (when installed) hasbeen released and safety pin removed, grenade isarmed. Launch immediately.(3) Keep adapters clean and dry, particularlyon inside of stabilizer tube. Do not use adapters withcracked or distorted stabilizer tubes. Check thatgrenade fits on adapter. Assure that adapter movesfreely on launcher.(4) Never place grenade on launcher unless itis to be fired immediately. Do not attach grenades tolauncher as means of carrying grenades.(5) Normally, grenades are prevented fromfalling off launcher by grenade retainer spring; however,when firing at minus (depressed) angle of elevation,lower rifle gently to prevent weight of grenade fromcausing it to slip from launcher.(6) Do not handle duds. Report their locationto authorized disposal personnel.c. Adapters, Grenade Projection, M1-Series.(1) Applications. Grenade ProjectionAdapters M1 Series are used to adapt fragmentation,practice, illuminating and WP smoke hand grenades forlaunching from a rifle equipped with a grenade launcher.Three different models are available: the M1, the M1A1and the M1A2 (fig. 2-9). Fragmentation hand grenadescan be projected a maximum of 160 meters when firedfrom a rifle using Grenade Projection Adapters M1Series.(2) Preparation for use.WARNINGDo not use grenade having bent or damagedsafety lever with grenade projection 'adapter.Be sure base of grenade is fully seated againstbase of cup and that each claw holds grenadetightly above seam of Grenade M61, M26 or M30,or in body serrations of Grenades Mk2, or inannular ring of M34. Do not apply force toarming clip of adapter after grenade has beenattached.CAUTIONDo not use damaged adapters.(a) Inspect grenade to make suresafety pin and safety clip are securely in place, andsafety lever is not damaged or bent.2-11

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev. Vol 2/TM 1320-12/1AFigure 2-9. Grenade projection adapter M1A2.2-12

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev. Vol 2/TM 1320-12/1A(b) Inspect grenade projection adapterfor bent, cracked, or damaged stabilizer tube or finassembly.(c) Insert safety lever of grenade intoarming clip of adapter.(d) Force grenade into claws until baseof grenade is resting in cup (or against end of stabilizertube of Adapter M1).(e) Inspect safety lever to see that itsend is securely hooked under T-lug of fuze body.(f) Place hand grenade with grenadeprojection adapter on launcher and push it to desiredannular groove.NOTEWhen a number of grenades are tobe launched with the adapter set atthe same annular groove, thelauncher positioning clip may beused. The clip is snapped intoposition at the desired annulargroove, and serves as a positioningstop for the adapter placed on thelauncher.(3) Operation. Prepare all hand grenadeswith projection adapters for launching as follows:WARNINGDo not release safety clip and safety pin untilready to fire. If arming clip fails to hold safetylever securely in place and/or striker has beenreleased, immediately launch grenade into safearea and take cover.(a) Holding safety lever in arming clipwith thumb of one hand, and being careful not to put anystrain on arming clip, carefully release safety clip (wheninstalled) and remove safety pin with other hand.(b) Slowly ease pressure on safetylever; see that lever is held in place by arming clip andthat it will not become displaced so as to permit fuzestriker to be released.(c) Refer to applicable rifle operatormanuals for grenade launcher and cartridgecombinations. Refer to FM 2330 for tactical use ofgrenade projection adapters with grenades.(4) Prepared for use but not launched. Oncesafety pin has been removed and safety clip released(where installed), grenade is armed. Launchimmediately. Do not attempt to replace safety devicesin order to return grenade to safe condition.d. Adapters, Grenade Projection, M2 Series.(1) Applications. Grenade ProjectionAdapters M2 Series are designed for adaptingcylindrical, chemical hand grenades for projection fromrifles equipped with grenade launchers. Two differentmodels are available: the M2 and M2A1 (fig. 2-10).Chemical hand grenades can be projected a maximumof 145 meters when fired from a rifle using GrenadeProjection Adapters M2 Series.(2) Preparation for use.WARNINGDo not use grenade having bent or damagedsafety lever with grenade projection adapter. Besure base of grenade is fully seated againstbase plate and that each claw holds grenadetightly above base seam. Do not remove safetypin until ready to fire.(a) Assure that safety pin is securely inplace and that safety lever is not damaged or bent.(b) Expand spring of setback band.Place band around grenade with coil spring centered onsafety lever 1/2-inch from end of safety lever, as shownin figure 2-10.(c) Make sure setback band is securelyin place on grenade. Then, force grenade into clawsuntil base of grenade is resting on base plate.(d) Inspect safety lever to see that itsend is securely hooked under lug of fuze body.(3) Operation.WARNINGIf setack band fails to hold safetylever securely in place, fire grenadeimmediately into safe area and takecover.(a) Holding safety lever in setback bandwith thumb of one hand, carefully remove safety pin withindex finger of free hand.(b) Slowly remove thumb pressure onsafety lever so that it is held in place by setback bandand does not move to a position which would permitfuze striker to be released.(4) Prepared for use but not launched. Seec(4) above.2-4. Rifle Grenade Cartridgesa. Applications.(1) Rifle grenade cartridges (fig. 2-11) arespecially designed, bulletless cartridges used forlaunching rifle grenades from rifles. By use of 2-13these cartridges, rifles project antitank, high-explosive,fragmentation, illuminating, smoke and chemicalgrenades; and ground signals. 'Thus, the rangebetween that which can be reached by throwing agrenade and the minimum range for light mortar fire iscovered.2-13

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev. Vol 2/TM 1320-12/1AFigure 2-10. Grenade projection adapter M2A1.2-14

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev. Vol 2/TM 1320-12/1ATable 2-2. Grenade Cartridge Used with Applicable RiflesRifle model Caliber Grenade cartridge model Grenade launcher, retainerM16, M16E1 5.66MM M195 For grenade launcher and/or re-M14, M14R1 7.62MM M64 tainer, see applicable rifle op-M1 .30 M3 erator manuals.NOTEGrenade Cartridges M6 and M7,found in older packings, are nolonger authorized for use. Return toammunition disposal personnel.(2) Grenade cartridges used with each rifleare listed in table 2-2.(3) Rifle grenade cartridges and launcherpositioning clips are packed with most rifle grenades andgrenade projection adapters. Grenade cartridges arealso available for issue packed separately.b. Precautions.(1) Use only grenade cartridges prescribed, infiring rifle grenades.(2) Do not fire rifle grenades with serviceammunition (bulleted cartridge) or blank ammunition,under any circumstances.Section III. OPERATION UNDER UNUSUAL CONDITIONS2-5. GeneralThe procedure of operation under unusual conditionsare similar to those for operation under usual conditions.See paragraph 2-1 and 2-2.a. Unusual Terrain. Exercise caution whenthrowing or launching grenades on inclined terrain toprevent rollback of grenade to operator or throwing area.b. Confined Area. Exercise care in usingexploding grenades in confined areas. (High pressureresulting upon detonation may cause collapse ofstructure. Obstructions may prevent grenades fromreaching targets.)2-6. Extreme Temperature Conditionsa. Protect grenades from snow or ice. (Snow, orice-covered grenades are difficult to handle.)b. Clean ice or snow off grenades before use.2-15

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1ACHAPTER 3MAINTENANCE INSTRUCTIONSSection 1. SERVICE UPON RECEIPT OF MATERIEL3-1. GeneralUpon receipt of materiel, the individual in charge willdetermine whether the materiel has been properlyprepared for service by the supply organization asindicated in this chapter.3-2. PrecautionsUnless packing boxes show evidence of moisture ordamage, do not open until grenades are to be issued.3-3. UnpackingWARNINGIf hand grenade is packed upsidedown (fuze down), or right side up(fuze up) with safety pin not in place,do not attempt to remove grenadefrom its container. Replace packingsupport or filler material. Replacecover and tape in place. Returncontainer to ammunition disposalpersonnel.a. Inspect boxes for damage. If markings on boxconflict with nomenclature of grenade type requisitioned,return shipment to ammunition supply personnel.Return boxes with contents showing signs of excessivedamage to ammunition supply personnel for disposition.(1) If applicable, cut steel strapping withshears; twist lock on wooden packing box.hasp.cover.(2) If applicable, cut seal with shears on box(3) Open hasp (if applicable) and pry up box(4) If barrier bag is used, open.(5) Remove containers from packing box.(6) Pull off sealing from container end labeled"top". (If metal container, insert key on tab tear strip andturn key.)(7) Inspect grenades (para. 3-7) beforeremoving.Change 10 3-1

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AFigure 3-1. Deleted.Figure 3-2. Deleted.Figure 3-3. Deleted.Change 10 3-2

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AWARNINGIF THE M76 OR M82 SMOKEGRENADE IS ARMED(SLIDER/BORERIDER PROJECTINGFROM THE -BODY, RED SHOWINGON SLIDER), DO NOT ATTEMPT TOREMOVE GRENADE FROM ITSCONTAINER. UNDER NOCIRCUMSTANCES SHOULDATTEMPTS BE MADE TO RETURNTHE SLIDER TO A SAFE POSITIONBY HAND. REPLACE PACKING,CLOSE COVER, AND NOTIFY EODPERSONNEL FOR DISPOSAL.b. Inspect M76 Smoke Grenade metal ammunitionbox for damage. If markings on box conflict withnomenclature of grenade type requisitioned, returnshipment to ammunition supply personnel. Returnboxes with contents showing signs of excessive damageto ammunition supply personnel for disposition.(1) Break seal, unlatch, and open ammunitionbox cover (fig. 3-3.1).CAUTIONDO NOT JERK STRAPNOTESmoke grenade ammunition boxesmay be packed differently (fig. 3-3.2).If straps are not used in packing,grenades and spacers must beremoved by hand.(2) Grasp strap loop in hand and pull firmly toremover top grenade/spacer assembly from box (fig. 3-3.2).(3) Repeat step 2 to remove lowergrenade/spacer assembly.(4) Salvage spacers and pull straps for reuse.(5) Salvage ammunition box for reuse.Figure 3-3.1. M76 smoke grenade ammunition box.Change 14 3-3

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AFigure 3-3.2. IR and simulant grenade boxes and packing.Section II. TOOLS AND EQUIPMENT3-4. Common Tools and EquipmentStandard and commonly used tools and equipmenthaving general application to this materiel areauthorized for issue by tables of allowances (TA) andtables of organization and equipment (TOE).3-5. Special Tools and EquipmentSpecial tools and equipment required at organizationallevel are listed in appendix C.Change 14 3-4

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1ASection III. MAINTENANCE-USER/OPERATOR3-6. General(a) Diamond crimp. If width betweenMaintenance at the user/operator level consists mainly corner points of obtuse angles of diamond crimp is lessof preventive maintenance. During maintenance, then 1/16-inch spread safety pin legs to angle of 45° toinspect for critical defects. A critical defect is a missing 60°as shown in figure 3-4.or faulty component of a grenade that may result in(b) Angular spread. If angular spread ishazardous or unsafe conditions for personnel using the less then 45°, spread safety pin legs to angle of 45° togrenades.60°as shown in figure 3-4.3-7. InspectionNOTEa. Inspect unpacked hand grenades periodically forOnly one safety pin leg is required tothe following:be bent on the M201 series fuzes.(1) Rust and/or corrosion.(6) Presence and position of safety clip. The(a) Turn in grenades containing omission of a safety clip on any grenade requiring one iscorroded or pitted fuzes and/or safety levers toammunition disposal personnel.a critical defect and the clip should be installed. (Seetable 1-1 for listing of grenades requiring safety clips.)(b) Turn in grenades with heavily rusted(7) When adjustment or installation of safetyor pitted bodies to ammunition supply personnel for clip is required, adjust as follows:disposition.(c) Clean grenades with lightly rustedbodies in accordance with paragraph 3-8. Lightly rustedgrenade bodies are serviceable and may be thrown orlaunched from a rifle.(2) Damaged safety levers or broken lugs(fig. 2-1).(3) Presence of safety pin. Missing safety pinis a critical defect and ammunition disposal personnelshould be notified.(4) Assure that diamond crimp is present or,if safety pin legs are spread, the spread is 45° to 60°.An insecurely installed safety pin is a critical defect andshould be adjusted.(5) When adjustment of safety pin isrequired, adjust as follows (fig. 3-4):(a) Grenade M67 will be found with twotypes of safety clips. One type is the same as that usedon the M69 (fig. 2-3). The second is adjusted as shownin figure 3-5.1. Hold the fuzed grenade in palmof hand with pull ring up (1, fig. 3-5).2. Insert small loop at open end ofsafety clip in slot of fuze body beneath safety level (2,fig. 3-5).3. Press clip across safety leveluntil closed end of clip touched safety level and clip hassnapped around safety lever (3, fig. 3-5).(b) Grenade M61 used the same safetyclip as the M62. See paragraph 2-1b(2)(g).(8) Fuze seated and correct assembly ofsafety clip (when installed) (fig. 3-6).Change 14 -3-4.1

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1ATHIS PAGE INTENTIONALLY LEFT BLANKChange 14 3-4.2

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AFigure 3-4. Adjustment of safety pin.(9) Fuze not correctly seated. Fuze shouldbe fully threaded into the grenade body and handtight.Inspect and adjust for correct seating of fuze, as follows:(a) Hold the fuzed grenade in palm ofhand with fuze up (1, fig. 3-6.1).(b) Turn fuze in a clockwise directionuntil handtight (2, fig. 3-6.1).b. Inspect unpacked rifle grenades periodically forthe following:(1) Rust or corrosion on body and stabilizer.Lightly rusted or corroded grenade bodies areserviceable and may be launched. A grenade with anyrust or corrosion on the stabilizer is unserviceable andshould be turned over to authorized disposal personnel.A grenade with a dented nose projection cap isunserviceable and should be turned over to authorizeddisposal personnel.(2) Moisture on inside of stabilizer tube.(3) Condition of nose protection cap (fig. 3-7).(4) Presence of safety clip (Rifle GrenadesM22 Series) and presence of safety wire (RifleGrenades M19A1). Absence of these items is a criticaldefect and ammunition disposal personnel should benotified.(5) Presence of tape in nose vent (RifleGrenades M23 Series) and presence of nose closingplug (Rifle Grenades M22 Series).(6) Dents and deformation in stabilizer tubeand fin assembly (fig. 3-8).c. Inspect unpacked smoke screening grenades,L8A1 and L8A3 periodically. Dispose of grenadescontaining the following defects:(1) Metal base punctured.(2) Rubber body torn or dry rotted.(3) Electrical contact, corroded or bent.Change 12 3-5

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1A(4) Metal foil covering gas propulsion holesmissing or punctured.(5) Grenade distortion preventing insertioninto launcher (discharger).(6) Deleted.d. Inspect unpacked M76 and M82 SmokeScreening Grenades periodically. Dispose of grenadescontaining the following defects (fig. 1-5b and 1-5c):(1) Grenade armed, slider/boreriderextended, showing red.(2) Plastic body cracked or damaged.(3) Electric firing contact clips damaged,bent, corroded, or missing.(4) Bore seal damaged or missing.Return defective grenades to ammunition disposalpersonnel for their disposition, except where adjustmentis authorized. (See paragraph a(5) above.)3-8. Cleaning/Preservationa. Clean grenades of dirt, mud, grease, sand, etc.,taking care not to disturb safety devices, by wiping offwith clean, dry cloth or other nonabrasive material (fig.3-9).b. Wipe off light rust which can be removed fromgrenade bodies with clean, dry cloth.Change 12 3-6

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1AFigure 3-5. Assembly of safety clip to grenade M67.Change 10 3-6.1 (3-6.2 blank)

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-11/OP 3833 1 st Rev. Vol 2, CH-2 TM 1330-12/1A CH2Figure 3-6. Fuze seated w/safety clips.Change 2 3-7

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-11/OP 3833 1 st Rev. Vol 2, CH-2 TM 1330-12/1A CH2Figure 3-6.1. Tightening fuze to insure correct seating.Change 2 3-8

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-11/OP 3833 1 st Rev. Vol 2, CH-2 TM 1330-12/1A CH2Figure 3-7. Acceptable and dented nose protection caps.Change 2 3-8.1

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-11/OP 3833 1 st Rev. Vol 2, CH-2 TM 1330-12/1A CH2This page intentionally left blank.3-8.2

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-11/OP 3833 1 st Rev. Vol 2, CH-2 TM 1330-12/1A CH2Figure 3-8. Defective stabilizer tube and fin assembly.Figure 3-9. Cleaning grenades.3-9

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1ASection IV. MAINTENANCE-ORGANIZATIONAL3-9. GeneralOrganizational maintenance is performed by designatedpersonnel in using units and is primarily preventive innature. It is performed to prevent deterioration ofammunition due to rough handling and exposure. DirectSupport units may be called upon to provide technicaladvice, assistance, packing materials and expendablesupplies for accomplishing maintenance. Direct Supportwill actually perform the organizational levelmaintenance if the size of the job to be done exceedsthe manpower capability and equipment atorganizational level.3-10. Unpackinga. For unpacking instructions see Chapter 2,"Preparation For Use" under the appropriate type ofgrenade.b. During unpacking, inspect grenades inaccordance with paragraph 3-7.3-11. Inspectiona. Inspect all packing boxes for external damageor moisture .b. If there is evidence of damage or moisture,unpack and inspect containers for damage or moisture.c. If containers show evidence of damage ormoisture, continue unpacking and inspection, inaccordance with paragraphs 3-3 and 3-7, to extentnecessary to determine disposition.d. If lot number of the grenade and fuze is illegible,consider both unserviceable and return to authorizeddisposal personnel for disposition.e. If grenade lot number is legible and body coloridentifiable, but fuze lot number is illegible, grenademay be renovated. Mark and return to highermaintenance echelon for disposition.3-12. Touch-Up and Spot PaintingClean grenades as outlined in paragraph 3-8, exceptthat light abrasives may be used to remove rust.Service as follows:a. Retouch (spot paint) grenade bodies as requiredto prevent further deterioration. Use same color paintas on grenade body. Re-mark grenade bodies asrequired to retain proper identity. Use only paints andstencil inks indicated in section III of appendix B.b. Clean metal ends of fiber or metal containerwith such materials as sandpaper, wire brushes, emerycloth or steel wool to remove rust from metal. Wipemetal with clean, dry cloth to remove dust prior torepainting. Repaint metal with paint, Black, No. 37038,Spec TT-E-516. Re-mark containers as required toassure proper identity.c. Re-mark inner packing' by printing, stamping orstenciling as follows to assure proper identity:(1) Cartons, bags. Indicate quantity,nomenclature, lot number, month and year loaded.Mark in 2 -inch wide black letters, No. 37038, FederalStandard 595.(2) Metal cans and fiber containers. Indicatequantity, nomenclature, lot number, month and yearloaded. Mark in ½-inch wide white letters, No. 37875,Federal Standard 595 except the metal can for theGrenade, Rifle, Smoke, WP. Mark this can in yellowletters. No. 33538, Federal Standard 595. Table 3-1indicates marking of sealing strip for fiber containersand alternative cover marking for identifying class ofchemical filler other than chemical smoke.d. Re-mark wood packing boxes on top, one sideand both ends in ½ to 1 ½ inch black letters, No. 37038,Federal Standard 595. The following information isrequired on the box:Table 3-1. Marking of Sealing Strip and Alternative Cover MarkingStrip sealing Alt banding colors No. ofClass of chemical filler Color Stripes Color Stripes StripesSMOKE (WP) LIGHT GREEN 14491 LIGHT GREEN 34558SMOKE (HC) LIGHT GREEN 14491 LIGHT GREEN 34558GAS HARASSINGNON-PERSISTENT GRAY 16251 RED 11136 GRAY 36231 RED 31136 1GAS HARASSING GRAY 16251 RED 11136 GRAY 36231 RED 31136 2PERSISTENTChange 8 3-10

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1A(1) Federal Stock Number.(2) Department of Defense IdentificationCode.(3) Department of TransportationClassification.(4) Gross Weight.(5) Cubical Displacement.(6) Loaded Data.(7) Lot Number.NOTETouchup painting at theorganizational level may beaccomplished as desired. Use ofgrenades with light rust and/orcorrosion will have no effect on theirfunctioning characteristics.3-13. Repackinga. Repacking hand grenades.(1) Place hand grenades, fuze end up, incontainers. Place rifle grenades, nose down, incontainers.(2) If packed in fiber containers, seat one filler onbottom. Insert grenade base end down. Place packingsupport or filler material over grenade. Use as manyfillers on top as required to insure tight packing.Replace container lid or cover, and tape in place (fig. 3-10).(3) Pack containers in original wooden boxes. Ifthese boxes are not available, approximate original boxsize and shape.(a) Grenades packed in fibercontainers. Insert containers cover end up into box.Insert end fillers at ends, side fillers along sides, and topfillers on top as required to pack the contents tightly.Add any additional fiber board material necessary toproduce a tight packing.(b) Grenades packed in metalcontainers. Insert metal containers key end up in box.Place metal containers containing cartridge assortmenton central spacer. Place three launcher positioning clipson filler block and secure with one staple. Insert spacerbetween metal containers and block spacers; add fillersalong ends, sides, and top as required to provide tightpacking.Figure 3-10. Replacement of cover and taping inplace.Figure 3-11. Typical outer packing and markings.Change 12 3-11

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1A(4) Assure box is marked with proper itemnomenclature and lot number, as in figure 3-11.(5) Close box, secure hasp, and band box.b. Repacking IR Smoke Grenades.NOTE• Prior to repacking, inspect toassure grenades, box, andpacking are serviceable, cleanand free of dirt and moisture.• If strap loops are not containedin the packing, repack thespacers and grenades inside theammunition box.(1) Lay bottom halves of spacer on flatsurface (fig. 3-11.1).(2) Position a pair of grenades in spacercontours with contact ends facing opposite directions.(3) Align slider/borerider facing toward theadjacent grenade (fig. 3-11.1).(4) Position top halves of spacer on top ofgrenades.(5) Assure that slider/borerider is properlyaligned.CAUTIONSLIDER/BORERIDER SHOULD NOTBE IN CONTACT WITH SPACER.(6) Loop pull strap lengthwise over thegrenade/spacer assembly.(7) Slide strapped grenade/spacer assemblyinto ammunition box while holding pull strap taut toprevent twisting or kinking of strap (fig. 3-3.2).(8) Assure that strapped grenade/spacerassembly sits on bottom of box.(9) Lay strap flat on top of grenade/spacerassembly; fold if necessary.(10) Repeat steps 1 through 9 to load secondpair of grenades into box.(11) Assure proper seating of top strappedgrenade/spacer assembly on bottom grenade/spacerassembly.(12) Close cover, latch, and seal ammunitionbox.3-14. Repacking L8A1 Grenades, L8A3 Grenadesa. Place packing and grenades into metalcontainer.b. Close metal box.c. Assure box is marked with correct item,nomenclature, and lot number.Figure 3-11.1. Grenade/spacer assembly.U.S. GOVERNMENT PRINTING OFFICE: 1994-546-043/00710Change 14 3-12PIN: 027389-014

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-11/OP 3833 1 st Rev. Vol 2, CH-2 TM 1330-12/1A CH2CHAPTER 4SHIPMENT AND STORAGESection I. SHIPMENT4-1. Precautions(1) Retain grenades in their packing untilGive grenades being transported adequate protection. issued.Assure they will not be damaged, contaminated or(2) Do not roll, drop, throw or subject grenadeotherwise degraded so that they become dangerous or boxes to rough handling.their usefulness impaired.4-3. Data4-2. InstructionsData normally appearing on grenade outer pack area. Transportation.illustrated in figure 3-11.(1) Block and brace grenade packages beingtransported in trucks, jeeps and other tactical vehicles.(Blocking and bracing must be adequate to withstandsudden stops and starts, as well as off-road operations.)(2) If packing is broken or damaged (fig. 4-1)and munitions remain serviceable, restore or replacepacking by using acceptable packing material. Assurethat all markings (e.g., lot number, nomenclature, FSN,etc.) are transferred to replaced packing.b. Handling.WARNINGAvoid improper handling asreliability and safety of grenades canbe affected and may be hazardous toFigure 4-1. Damaged packing box.personnel.4.4. Precautionsa. Select level, well drained sites free from readilyignitable and flammable materials.b. Provide nonflammable or fire-resistantoverhead covers (e.g., tarpaulin) for all grenades.Maintain overhead space of approximately 18 inchesbetween cover and grenades. Keep cover at least 6inches from pile on ends and at sides, to permitcirculation of air.c. Temporarily store unserviceable grenades insegregated area.d. Temporarily store using unit returns insegregated area, for inspection and repacking.Section II. STORAGEe. Regard suspended grenades as unserviceable,unless otherwise instructed.4-5. Dataa. Field Storage Categories.(1) General. Storage categories are theprimary groups into which ammunition is segregated forstorage in the field. The groupings are based onconsideration of the desirability of storing components ofcomplete rounds in adjacent stacks and onconsideration of the hazards of propagation ofexplosion, range of fragments, spread of fires, andchemical contamination. Safety procedures coveringammunition storage are based on the following factors:4-1

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-11/OP 3833 1 st Rev. Vol 2, CH-2 TM 1330-12/1A CH2(a) Ammunition items havingcomparable storage risks are grouped together in thesame storage category.(b) Within each storage category, themaximum quantity of ammunition to be stored withineach stack and within each Field Storage Unit (FSU),and the minimum distance between FSU's and theminimum distance between FSU's and categories, arespecified in quantity-distance table 4-1 through 4-5 forthe storage of ammunition in the field.(c) Normally, only one kind ofammunition is stored in a stack. Ammunition should bearranged in stacks in the best manner to facilitateinventory and inspection. Where camouflage is aconsideration, stacks may be stepped in toward the top(terraced or pyramid stacking) to decrease shadows.Whenever desirable, components of complete roundsmay be stored within the same FSU.(d) Small-arms ammunition, exceptbulk packed incendiary and tracer cartridges (whichmust be stored in category D) may be stored with anycategory.(2) Categories for storage of conventionalammunition. For storage purposes, conventionalammunition is divided into the following categories:(a) Category A. Fixed and semifixedartillery ammunition, except incendiary and chemical.(b) Category B. Propelling charges,fuzes, primers, flash reducers and separate loadingartillery projectiles including HE and AP, but excludingincendiary and chemical projectiles.(c) Category C. Mortar ammunitionand hand grenades, except incendiary and chemical.(d) Category D. Pyrotechnics andchemical ammunition of all types, including chemical,filled rockets; gas, smoke, and incendiary bombs; gasand smoke artillery ammunition; incendiary andchemical grenades, smoke pots, GB and VX filledmines, and bulk packed incendiary and small-armstracer cartridges.(e) Category E. All Demolitionexplosives, antitank and antipersonnel mines (exceptGB and VX loaded), and components such as blastingcaps, firing devices, detonating cord, and safety fuze.(f) Category F. Rockets, rocketmotors, and rifle grenades, except chemical.(g) Category G. The following items ofAir Force class V supply-all unfuzed high-explosivebombs, aircraft mines, aircraft torpedoes, andfragmentation bombs, fuzes and/or primer-detonatorsfor the above items; and fragmentation bomb clusters,fuzed or unfuzed. The remainder of Air Force class Vitems must be stored in other applicable categories.b. Quantity-Distance Tables for Field StorageCategories. Procedures set forth in quantity-distancetables 41 through 4-5 are to be used as a guide in thestorage of ammunition in the field only. Theseprocedures are based upon the necessities incident tothe storage of ammunition in the field. It must beemphasized that any reduction of distances or increasein tonnages to those prescribed increases the probabilityof loss of life and ammunition.Table 4-1. Category A, B, or DMinimum distance in feet betweenGross tons Gross tons Stacks Stacks FSUper stack per FSU Unbarricaded Barricaded Unbarricaded CategoriesLess than 10... 400 40 30 300 75010-20 max. 400 50 40 300 750NOTEIf desirable, fixed and semifixed smoke ammunition, except WP., may be stored in category A.The minimum distance between a stack of propelling charges and any other stack must be 100feet whether barricaded or unbarricaded.Table 4-2. Category CMinimum distance in feet betweenGross tons Gross tons Stacks Stacks FSUper stack per FSU Unbarricaded Barricaded Unbarricaded CategoriesLess than 10... 300 75 60 300 90010-20 max. 300 105 75 300 9004-2

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-11/OP 3833 1 st Rev. Vol 2, CH-2 TM 1330-12/1A CH2NOTEWhenever storage space is noted, category C ammunition may be combined with category E.Table 4-3. Category EMinimum distance in feet betweenGross tons Gross tons Stacks Stacks FSUper stack per FSU Unbarricaded Barricaded Unbarricaded CategoriesLess than 5... 50 75 60 300 9005-10 max. 50 105 75 300 900Table 4-4. Category FMinimum distance in feet betweenGross tons Stack barricaded Gross tonsper stack & unbarricaded Der FSU FSU unbarricaded FSU barricaded CategoriesThe max. allowable See note below- 20 200 75 1500gross wt. per stack 30 230 90 1500will be 20 tons. 40 265 99 150050 295 101 150060 330 120 150080 390 135 1500100 455 150 1500NOTEThe minimum distance between barricaded stacks will be 75 feet. The minimum distancebetween unbarricaded stacks will be 150 feet.Table 4-5. Category G Class VMinimum distance in feet betweenGross tonsper FSU FSU unbarricaded FSU barricaded Categories20 200 75 150030 230 90 150040 265 99 150060 299 101 150060 330 120 150080 390 135 1500100 455 150 1500NOTEUnder normal conditions, the Department of the Air Force will store and issue all class Vsupplies; however, depot commanders should always be prepared to handle these supplies inemergencies.4-6. Proceduresa. Use heavy, well supported dunnage to preventstack from sinking, and to keep bottom tier offground.b. Use hardstand of gravel and sand rather thanexcessive dunnage.c. Allow at least 6-inch clearance beneath pile forair circulation.d. Dig suitable trenches to prevent water fromflowing under pile.4-3

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-11/OP 3833 1 st Rev. Vol 2, CH-2 TM 1330-12/1A CH25-1. Generala. Destruction of grenades subject to capture orabandonment will be undertaken by the using arm onlywhen, in the judgment of the unit commanderconcerned, such action is necessary in accordance withorders of, or policy established by, the Armycommander.b. The information which follows is for guidanceonly. The conditions under which destruction will beeffected are command decisions and may vary in eachcase, depending upon a number of factors, such as thetactical situation, security classification, the quantity andlocation of grenades; facilities for accomplishingdestruction, and time. In general, destruction ofgrenades can be accomplished most effectively byburning or detonation, or a combination of thesemethods. However, selection of the particular methodof destruction requires imagination and resourcefulnessin the utilization of the facilities at hand under theexisting conditions. Time is usually critical.c. If destruction to prevent enemy use is resortedto, grenades and their components must be so badlydamaged that they cannot be restored to a useablecondition in the combat zone. Equally important, thesame essential components of all grenades must bedestroyed so that the enemy cannot assemble completerounds from undamaged components of severaldamaged complete rounds.d. If destruction of grenades is directed, dueconsideration should be given to the following:(1) Selection of a site (for the destructionoperation) that will cause greatest obstruction to enemymovement and also prevent hazard to friendly troopsfrom fragments incidental to the destruction.(2) Observance of appropriate safetyprecautions.5-2. MethodsGrenades can be most quickly destroyed by burning ordetonation. The following methods, in order ofpreference, are considered the most satisfactory fordestruction of grenades to prevent enemy use:a. Method No. 1-by Detonation.CHAPTER 5DESTRUCTION OF GRENADES TO PREVENT ENEMY USE(1) General. Packed and unpacked HEgrenades, fuzes, and accessories may be destroyed byplacing them in piles and detonating them withdemolition charges, using 1-pound TNT blocks orequivalent, together with the necessary detonating cordto make up each charge.(2) Method of destruction.NOTEOne hundred pounds of packed HEgrenades require a 2-pounddemolition charge to assurecomplete detonation of the pile. Forunpacked HE grenades, a 1-pounddemolition charge is sufficient.(a) Prepare the demolition charge(using the required TNT blocks together with thenecessary detonating cord per charge) and place thecharges, as necessary, on the pile to be detonated.(b) Provide for dual priming tominimize the possibility of a misfire. For priming, eithera nonelectric blasting cap crimped to at least 5 feet oftime blasting fuse or an electric blasting cap and firingwire may be used. Time blasting fuse, which containsblack powder, and blasting cap must be protected frommoisture at all times.WARNINGEach roll of fuse must be testedshortly before use. The burning rateof safety fuses varies under differentatmospheric and/or climaticconditions; from a burning time of 30seconds or less per foot to 45seconds or more per foot.Time blasting fuse may be ignited by a blasting fuseigniter or an ordinary match; the electric blasting caprequires a blasting machine or equivalent source ofelectricity.WARNINGBlasting caps, detonating cord, andtime5-1

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-11/OP 3833 1 st Rev. Vol 2, CH-2 TM 1330-12/1A CH2blasting fuse must be kept separatedfrom the charges until required foruse.NOTEFor the successful execution ofmethods of destruction involving theuse of demolition materials, allpersonnel concerned will bethoroughly familiar with theprovision of FM 5-25. Training andcareful planning are essential.(c) Detonate the charges. If primedwith nonelectric blasting cap and time blasting fuse,ignite and take cover; if primed with electric blastingcap, take cover before firing the charges. The dangerarea for piles detonated in the open is a circular areawhich varies according to the quantity of explosive itemsto be destroyed. Quantity-distance data (inhabitedbuilding distance) as given in chapter 4 may be used asan appropriate guide for such operations as arecontemplated in this chapter.b. Method No. 2-by Burning.(1) General. Packed and unpacked highexplosivegrenades, smoke grenades, and illuminatinggrenades may be destroyed quickly and effectively byburning.(2) Method of destruction.(a) The ammunition should be stackedup in a pile.(b) Place flammable materials, such asrags, scrap wood, or brush, on and about the pile.(c) Pour gasoline and oil over the entirepile.(d) Ignite by means of an incendiarygrenade fired from a safe distance, a combustible trainof suitable length, or other appropriate means. Takecover immediately. The danger area for piles beingburned in the open is 600 meters.WARNINGCover must be taken without delay,since an early explosion of explosiveammunition may be caused by thefire. Consideration should be givento the highly flammable nature ofgasoline and its vapor. Carelessnessin its use may result in painful burns.5-2

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/TM 1330-12/1A Ch 5APPENDIX AREFERENCESA-1. Administrative Publicationsa. Army RegulationReporting of Transportation Discrepancies in Shipments ............................................AR 55-38Malfunctions Involving Ammunition and Explosives Requirement ControlSymbol DRC 132 (MIN).....................................................................................AR 75-1Accident Reporting and Records ................................................................................AR 385-40Packaging Improvement Report .................................................................................AR 700-58b. DA PamphletsIndex of Blank Forms .................................................................................................DA Pam 310-2A-2. Bank FormsDiscrepancy in Shipment Report (Short Title DISREP) ...............................................SF-361Accident Report..........................................................................................................DA Form 285Recommended Changes to Publications and Blank Forms.........................................DA Form 2028Ammunition Condition Report.....................................................................................DA Form 2415Maintenance Request.................................................................................................DA Form 2407Packaging and Improvement Report ..........................................................................DD Form 6A-3. Doctrinal, Training and Organizational PublicationsChemical Reference Handbook ..................................................................................FM 3-8Explosives and Demolitions........................................................................................FM 5-25Grenades and Pyrotechnic Signals.............................................................................FM 23-30A-4. Equipment PublicationsStorage, Shipment, Handling and Disposal of Chemical Agents andHazardous Chemicals .............................................................................................TM 3-250The Army Maintenance Management Systems...........................................................TM 38750Ammunition and Explosives Standards.......................................................................TM 9-1300-206Organizational Maintenance Manual (including RPSTL) Launcher, Grenade,Smoke, Screening RP M239..........................................................................TM 3-1040-266-20&PArmy Ammunition Data Sheets for Grenades .............................................................TM 43-0001-29Change 5 A-1 /(A-2 blank)

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12APPENDIX BMAINTENANCE SUPPLIESSection I. INTRODUCTIONB-1. ScopeThis appendix lists expendable items which are requiredfor operator and organizational maintenance.B-2. Explanation of Columns in the Tabular List ofExpendable Materials, Section IIa. National Stock No. Column 1 indicates thenational stock number assigned to the item and shall beused for requisitioning purposes.b. Description. Column 2 indicates the Federalitem name and the minimum description to identify theitem.c. Specification No. Column 3 indicates thespecification which controls the design or characteristicsof the item.d. Unit of Issue. Column 4 indicates the unit ofissue of each maintenance supply item.NOTEMaterials should be requisitionedthrough normal supply channels onan as-required basis.Section II. EXPENDABLE MATERIALS(1) (2) (3) (4)UnitNational Specification ofstock No. Description No. issue6810-00-184-4796 ACETONE: Technical O-A-51 gl8020-00-240-6361 BRUSH, ARTISTS: flat chisel edge H-B-118 ea8020-00-246-8504 BRUSH, ARTISTS: round flat edge H-B-118 ea7520-00-223-8000 BRUSH, STENCIL: 13/16 x 15/16 in H-B-621 ea8020-00-597-4767 BRUSH, VARNISH: 3/8 in x 5/8 in H-B-118 ea8135-00-579-8457 CHIPBOARD: 4x8 ft, 0.061-in thk UU-C-282 shENAMEL8010-00-297-2122 Black, No. 37038 TT-E-516 gl8010-00-297-2119 Blue, light, No. 35109 TT-E-516 gl8010-00-297-2120 Gray, No. 36231 TT-E-516 gl8010-00-598-5939 Green, dark, No. 34108 TT-E-515 gl8010-00-828-3193 Green, light, No. 34558 TT-E-516 gl8010-00-297-2116 Olive, drab, No. 34087 TT-E-516 gl8010-00-297-2113 Olive, drab, No. 34087 (5 gl) TT-E-516 gl8010-00-848-9272 Olive, drab. No. 34087 TT-E-516 pt (spray)8010-00-577-4937 Red, No. 31168 TT-E-516 qt8010-00-297-2114 Red, light, No. 31136 TT-E-516 gl8010-00-297-2111 White, No. 37875 TT-E-516 gl8010-00-878-5761 White, No. 37875 TT-E-516 pt (spray)8010-00-297-2112 Yellow, No. 33538 TT-E-516 gl8010-00-844-0870 Orange, No. 32246 TT-E-515 ptINK, MARKING STENCIL:7510-00-161-0811 Black, f/porous surface TT-I-1795 gl7510-00-161-0815 White, f/porous surface TT-I-1795 gl7510-00-161-0812 Gray, r/porous surface TT-I-1795 gl7510-00-161-0814 Red, f/porous surface TT-I-1795 gl75100-161-0810 Green, f/porous surface TT-I-1795 gl7510-00-191-6030 Black, f/nonporous surface TT-I-1795 gl7510-00-224-6733 Yellow, f/nonporous surface TT-I-1795 ptChange 5 B-1

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12(1) (2) (3) (4)UnitNational Specification ofstock No. Description No. issueLACQUER:8010-00-063-8967 Silver/Aluminum, No. 17178 MIL-L-1195 gl8010-00-063-8968 Brown, No. 30117 MIL-L-1195 gl8010-00-527-3196 Lusterless, Sand, No. 30277, f/obliterating stencil TT-L-40 g]markings8010-00-161-7392 Lusterless, Sand, No. 30277, f/obliterating stencil TT-L-40 glmarkings(5 gl)8135-00-754-2628 PAD, CUSHIONING, SOLID: MIL-B-3106 eaPulp 8x4 ft, 1/16-in thk5350-00-271-7935 PAPER, ABRASIVE, FLINT: 2/0, 1/2x6 open P-P-105 pgcoat, gr 1.2.2, class 1(100 sh)8010-00-899-8825 PRIMER COATING: Zinc chromate, spray TT-P-1757 pt8010-00-515-2208 PRIMER, PAINT: Zinc chromate TT-P-666 gl7920-00-205-1711 RAG, WIPING: cotton unbleached, mixture DDD-R-30 blgrade 8(350 lb)5340-00-598-3442 SEAL, ANTIPILFERAGE: 1/2x12 in. MS-51938-2 bx(100)8135-00-239-5291 SEALS: for 5/8-in strapping QQ-S-781 bx(5000)8135-00-239-5294 SEALS: for 1l/4-in strapping QQ-S-781 bx(1000)6850-00-295-7685 SILICONE COMPOUND: MIL-S-8660 cn(10 lb)9310-00-240-4737 STENCILBOARD: oiled, type II, UU-S-625 shgrade III, 18½-in x 181/2 in8135-00-281-4071 STRAPPING STEEL: 5/8-in QQ-S781 co8135-00-283-0671 STRAPPING STEEL: 1/4-in QQ-S-781 co7510-00-823-8073 TAPE, PRESSURE: Black, 11/2-in w, type 1 MIL-T-43036 ro(60 yd)7510-00-266-6715 TAPE, PRESSURE SENSITIVE ADHESIVE: 2-in PPP-T-60 ro(72 yd)8010-00-160-5788 THINNER: for dope and lacquer TT-T-266 cn(5 gl)8010-00-160-5794 THINNER, ENAMEL: f/use with alkyd resin enamels TT-T-306 gl8010-00-242-2089 THINNER, PAINT: Mineral spirits, paint solvent TT-T-291 gl5350-00-242-4405 WOOL, METALLIC: Steel FF-S-740 ro(1 lb)Change 5 B-2

WWW.SURVIVALEBOOKS.COMC-1. Generala. The MAC assigns authorized maintenancefunctions to each maintenance category. Maintenancefunctions are assigned to the lowest maintenancecategory, as warranted by past experience in thefollowing considerations:(1) Skills available.(2) Man hours available vs. Maintenancefunction manhour requirements.(3) Tools and test equipment authorized.b. The basic entries on the chart list functionalgroups applicable to the end items which may requiremaintenance parts. The term functional group appliesto assemblies and subassemblies but not to piece parts.Entries are brief, general descriptions without stock orpart numbers, in order to minimize need for subsequentchange; however, entries permit positive identification.C-2. Maintenance FunctionsMaintenance functions are limited to and defined asfollows:a. INSPECT. To determine serviceability of anitem by comparing its physical, and mechanicalcharacteristics with established standards.b. TEST. To verify serviceability and to detectmechanical failure by use of test equipment.c. SERVICE. To clean and to preserve. If it isdesired that elements, such as painting and lubricating,be defined separately, they may be so listed.d. ADJUST. To rectify to the extent necessary tobring into proper operating range.e. ALIGN. To adjust specified variable elementsof an item to bring to optimum performance.f. CALIBRATE. To determine corrections to bemade in readings of instruments or test equipment usedin precise measurement. Consists of comparison of twoinstruments, one of which is a certified standard ofAPPENDIX CMAINTENANCE ALLOCATION CHART (MAC)Section I. INTRODUCTIONTM 9-1330-200-12/OP 3833 1 st Rev. Vol 2/TM 1330-12/1Aknown accuracy, to detect and adjust any discrepancy inaccuracy of the instrument being compared with thecertified standard.g. INSTALL. To remove and replaceunserviceable parts or components.h. REPLACE. To replace unserviceable items withserviceable assemblies, subassemblies, or parts.i. REPAIR. To restore an item to serviceablecondition through correction of a specific failure orunserviceable condition.j. OVERHAUL. To restore an item to acompletely serviceable condition as prescribed bymaintenance serviceability standards.k. REBUILD. To restore an item, as nearly aspossible, to original or new condition: in appearance,performance and life expectancy. This is accomplishedthrough the maintenance technique of completedisassembly of the item, inspection of all parts orcomponents, replacement of unserviceable elements,and subsequent reassembly of the item.l. SYMBOLS. The uppercase letter placed in theappropriate column indicates the lowest level at whichthat particular maintenance function is to be performed.C-3. Explanation of FormatPurpose and use of the format are as follows:a. Column 1, Group number. Column 1 lists groupnumbers, the purpose of which is to identifycomponents, assemblies, subassemblies and moduleswith the next higher assembly.b. Column 2, Functional group. Column 2 lists thenoun names of components, assemblies, subassembliesand modules on which maintenance is authorized.C-1

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev. Vol 2/TM 1330-12/1Ac. Column 3, Maintenance functions.d. Use of symbols.e. Column 4, Tools and equipment. This columnwill be used to specify, by code, those tools and testequipment required to perform the designated function.f. Column 5, Remarks. Self-explanatory.C-2

WWW.SURVIVALEBOOKS.COMMaintenance Allocation ChartGrenades, Hand: Fragmentation, M61, M26A1, M26, Mk2TM 9-1330-200-12/OP 3833 1 st Rev./TM 1330-12/1A(1) (2) (3) (4) (5)*G CAD/PAD Maintenance functions Tools and RemarksR Functional group equipmentO SERVICE RENOVATEUPTI O I RN N U R U N A R EU S N E C C S D P E PM P T P P L H M T J A P LB E E A A E A A U I A AE C S C C A U R L S N I CR T T K K N P K L T T R E1 Grenade, Hand: C D O O C O O H F 1, 2, 3 a, b, cFragmentation, w/Fuze (SeeAbove)2 Packing Material O O O O O O - O O 1, 2,3 a, b, c3 Fuze M2O4A1 H D H H H- H b, cM2O4A24 Safety Pin w/Pull Ring C C None req'd5 Safety Clip C C C C C C C None req'd d6 FIBERGLASS SLEEVE H H H H H H gMaintenance Allocation Chart-ContinuedGrenades, Hand: Fragmentation, M67, M33, M68, M59, (M3$ w/Fuze, M217), M57,M26A2 (Impact Fuzed)(1) (2) (3) (4) (5)*G CAD/PAD Maintenance functions Tools and RemarksR Functional group equipmentO SERVICE RENOVATEUPTI O I RN N U R U N A R EU S N E C C S D P E PM P T P P L H M T J A P LB E E A A E A A U I A AE C S C C A U R L S N I CR T T K K N P K L T T R E1 Grenade, Hand: C D O O C O O . C F D 1, 2, 3 a, b, cFragmentation, w/Fuze (SeeAbove)2 Packing Material O O O O O O O 1, 2, 3 a, b, c3 Fuze M213 D D D D D e4 Fuze M217 D D D D- D f5 Safety Pin w/Pull Ring C C6 Safety Clip C C C C C C CC-3

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev./TM 1330-12/1AMaintenance Allocation Chart-ContinuedGrenades Hand: M7, M7A1, ABC-M7A2, ABC-M7AS, M18, M15, AN-M8, M54(1) (2) (3) (4) (5)*G CAD/PAD Maintenance functions Tools and RemarksR Functional group equipmentO SERVICE RENOVATEUPTI O I RN N U R U N A R EU S N E C C S D P E PM P T P P L H M T J A P LB E E A A E A A U I A AE C S C C A U R L S N I CR T T K K N P K L T T R E1 Grenade, Hand: C D O O C O O H F 1,2,3 a, b, c, p2 Packing Material O O O O O O O O 1,2,3 a, b, c, p3 Fuze, M206 Series, M226, M201A1 H D H H H H H p4 Safety Pin and Pull Ring C C p5 Safety Pin F F F F F F pMaintenance Allocation Chart-ContinuedGrenades, Hand: ABC-M25A1, ABC-M25A2, MS4, AN-M14, XM58(1) (2) (3) (4) (5)*G CAD/PAD Maintenance functions Tools and RemarksR Functional group equipmentO SERVICE RENOVATEUPTI O I RN N U R U N A R EU S N E C C S D P E PM P T P P L H M T J A P LB E E A A E A A U I A AE C S C C A U R L S N I CR T T K K N P K L T T R E1 Grenade, Hand: C D O O C O O H F 1, 2, 3 a, b, cw/Fuze (See Above)C2 Packing Material O C O O O O F O O4 Safety Pin and Pull Ring C C3 Safety Pin and Pull Ring C CC-4

WWW.SURVIVALEBOOKS.COMMaintenance Allocation Chart - ContinuedGrenade, Hand: Offensive, Mk3A2TM 9-1330-200-12/OP 3833 1 st Rev./TM 1330-12/1A(1) (2) (3) (4) (5)*G CAD/PAD Maintenance functions Tools and RemarksR Functional group equipmentO SERVICE RENOVATEUPTI O I RN N U R U N A R EU S N E C C S D P E PM P T P P L H M T J A P LB E E A A E A A U I A AE C S C C A U R L S N I CR T T K K N P K L T T R E1 Grenade, Hand: Offensive w/Fuze C D O O C O H - 1, 2, 3 a, b, c2 Packing Material O - O O O O O O O 1, 2, 3 a, b, c3 Fuze, M2O6A2 C D C C C C C - hF D F F F F F - i.4 Safety Pin w/Pull Ring C - - - - C5 Safety Clip C C C - C C hF F F - - F F - i6 Grenade, Hand Offensive, w/o Fuze O - O O O O- - - - 1, 2, 3 a, b, cMaintenance Allocation Chart - ContinuedGrenades, Hand: Practice, M2O, M62 and M69(1) (2) (3) (4) (5)*G CAD/PAD Maintenance functions Tools and RemarksR Functional group equipmentO SERVICE RENOVATEUPTI O I RN N U R U N A R EU S N E C C S D P E PM P T P P L H M T J A P LB E E A A E A A U I A AE C S C C A U R L S N I CR T T K K N P K L T T R E1 Grenades, Hand: Practice, M3O, M62, C C O C O Q- F- 1, 2, 3 a, b, cM69 w/Fuzes2 Packing Material O O O O O O O O 1, 2, 3 a, b, c3 Fuze, M2O5A1 and M2O5A2 C D C O C C O 1, 2, 34 Body, M3O, M62, M69 C C O C O O F 1, 2, 3 a, b, c5 Plastic Stopper C C O O C C 1, 2, 3 a, j, k6 Charge, Practice C C O- C C 1, 2, 3 a, j, k7 Safety Clip C C O C C 1, 2, 3 a, l8 Safety Pin w/Pull Clip C C9 Fuze, M228 C D C O C- C C 1, 2, 3 a, mC-5

WWW.SURVIVALEBOOKS.COMMaintenance Allocation Chart - ContinuedSpecial TypesTM 9-1330-200-12/OP 3833 1 st Rev./TM 1330-12/1A(1) (2) (3) (4) (5)*G CAD/PAD Maintenance functions Tools and RemarksR Functional group equipmentO SERVICE RENOVATEUPTI O I RN N U R U N A R EU S N E C C S D P E PM P T P P L H M T J A P LB E E A A E A A U I A AE C S C C A U R L S N I CR T T K K N P K L T T R E1 Grenade, Launcher, Smoke: Screening, C C C C F FRP, UK L8A1, L8A32 Grenade, Launcher, Smoke: IR C C C C F FScreening, M763 Grenade, Launcher, Smoke: Simulant C C C C F FScreening, M82Legends:C- User/operator.O- Organizational maintenance.F - Direct support maintenance.H - General support maintenance.D - Depot maintenance.Remarks:a. Explanation of numbers - refer to Special Tools and Equipment List.b. For strapping grenade boxes, use 3/8-inch wide strapping. If not available, 5/8-inch wide strapping may be used.c. For palletizing, use 1-1/4 inch wide strapping.d. For use on Hand Grenade, M61.e. For use on Hand Grenades, M67 and M33.f. For use on Hand Grenades, M68, M59 (33A1 w/Fuze, M217), M57 and M26A2.g. Not applicable to Grenade, Mk2.h. Applicable to Navy.i. Applicable to Army.j. For Practice Grenades, M30 and M62, the use of practice charges and stoppers is optional.Change 12, C-6

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev./TM 1330-12/1Ak. Do not use practice charges or stoppers with Grenade, M69.l. For Practice Grenades, M62 and M69.m. For use on Practice Grenades, M69.n. No test Rifle Grenade HEAT, M31 is authorized at any maintenance level.o. Installation of these devices is only authorized in event of aborted firing mission.p. If the inner pack for the grenade is a metal case, these operations do not apply.q. Packed in fiberboard container.r. Packed in metal container.C-7

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev./TM 1330-12/1ARepair Parts ListItem which usesrepair part Repair part FSN Description repair part Unit of measureGrenade Hand, Practice: M62 1330-308-5655 Body, Practice, Hand Grenade M30w/Washer & Stopper, UnassembledeaGrenade, Hand, Practice, M62 1330-028-5851 Fuze, Grenade, Hand, M205A2 eaGrenade, Hand, Practice, M62 1330-G850 1 Charge, Practice, Hand Grenade eaGrenade, Hand, Practice, M62 1330-935-6149 Safety Clip eaGrenade, Hand, Practice, M69 1330-178-8515 Body, Practice, Hand Grenade M69 ea1330-133-9276 Fuze, Grenade, Hand M228 w/Safety Clip eaUnassembledGrenade, Rifle, Practice, M29 1330-152-3171 Stabilizer Tube-Fin Assembly eaAdapter, Grenade 8140-144-9822 Carton, Packing Ammunition eaProjecti0n M1 Series 8140-089-8636 Box, Packing, Ammunition eaGrenade, Hand Colored Smoke,M18, Green, Red, Yellow, Violet(Applicable to all of above colors).8140-345-9022 Box, Packing, Ammunition eaGrenade, Hand, Fragmentation, 8140-824-0819 Container, Fiber, M41A2 eaMk2; Practice, M21 8140-827-6247 Box, Packing, Ammuniti0n eaGrenade, Hand, 0ffensive,Mk3A28140-824-0818 Container, Ammunition, Fiber ea8140-152-0009 Box, Packing, Ammunition eaGrenade, Hand, Fragmentati0n, 8140-859-8019 Container, Ammunition, Fiber, M289A2 eaM26 Series, M57, M61; Practice, 8140-861-2101 Support eaM30 8140-857-2919 Box, Packing, Ammunition eaGrenade, Hand, Incendiary, TH3,AN-M14 8140-345-9022 Box, Packing, Ammunition eaGrenade, Hand, Riot, CS, M7A2;Riot, CN, M7A1, Riot CN1, ABCM25A2, Smoke, AN-M8 8140-345-9022 Box, Packing, Ammunition eaGrenade, Rifle, 8140-824-0817 Container, Ammunition, Fiber, M354A2 eaHEAT, M31 8140-828-7417 Box, Packing, Ammunition eaGrenade ,Rifle, AT, Practice,M29 8140-828-7425 Box, Packing, Ammunition eaGrenade, Rifle, Smoke, WP, M19 8140-827-6229 Box, Packing eaGrenade, Rifle, Smoke, Colored,M22A2 Box, Packing, Ammunition 2 eaGrenade, Rifle, Smoke, ColoredStreamer, M23A1 Box, Packing, Ammunition 2 ea1 Department of Defense Ammunition Code indicated in lieu of Federal Stock Number since each variation of packagingrequires a different Federal Stock Number.2 Federal St0ck Number n0t available.C-4. Special Tools and Equipmenta. Explanation of Columns.(1) Column 1 indicates the item number.(2) Source, Maintenance and Recoverability(SMR) codes Column 2.(a) Source code indicates the selectionstatus and source for the listed item.CodeExplanationP ----- Equipment supplied fr0m GSA/DSA 0r ArmySupply System.(b) Maintenance c0des indicate thelowestC-8

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev./TM 1330-12/1Acategory of maintenance authorized to install thelisted item.CodeExplanationC ------ 0perat0r/crew0 ------ 0rganizati0nal maintenanceF ------ Direct supp0rt maintenance(c) Recoverability code indicateswhether unserviceable items should be returned forrecovery or salvage. Items not coded are expendable.CodeExplanationR -----Item considered economically repairable atdirect and general support maintenance levels. Whenthe item is no longer economically repairable, it isnormally disposed of at GS level.(3) Federal Stock Number. Column 3. Thiscolumn indicates the Federal stock number assigned tothe item and will be used for requisitioning purposes.(4) Description. Column 4. This columnindicates the Federal item name and any additionaldescription of the item repaired.(5) Unit of Measure (U/M). Column 5. A 2-character alphabetic abbreviation indicating the amountof quantity of the item upon which the allowances arebased (e.g., ft, ea, pr, etc.).Special Tools and EquipmentItem No. SMR code Federal stock number Description Unit of issue1 PO- 3540-565-6242 STEEL STRAPPING and SEALING KIT:ea5/8” W X 0.023" thk strap2 PO- 3540-665-6244 STEEL STRAPPING and SEALING KIT:ea14' W X 0.0365 thk strap3 POR 7490-164-0537 STENCIL CUTTING MACHINE; HAND eaOPERATED.C-9

WWW.SURVIVALEBOOKS.COMTM 9-1330-200-12/OP 3833 1 st Rev./TM 1330-12/1ABy Order Of the Secretaries Of the Army and the Navy:Official:VERNE L. BOWERS,Major General, United States Army,The Adjutant General.W. C. WESTMORELAND,General, United States Army,Chief of Staff.MARK W. WOODSRear Admiral, United States NavyCommanderNaval Ordnance Systems CommandM. H. F0RWARDActing Quartermaster General 0f the Marine C0rpsDistribution:Army:To be distributed in accordance with DA F0rm 12-40, (qty rqr block No. 333) Organizational maintenance requirementsfor Grenades.Marine Corps:MARCORPS LIST 'E/BE' Copy to 700158 (3) 700161 (2)*US GOVERNMENT PRINTING OFFICE, 1995 - 388-421/40006

WWW.SURVIVALEBOOKS.COM

WWW.SURVIVALEBOOKS.COMPIN: 027389-000