Service manual and spare parts list - BUKH Bremen

More documents

Recommendations

Info

1.2.9 ZF 25 MA 22 Manual and Spare Parts List ZF M line kW 90 80 70 60 50 40 30 20 Transmission power input 15 1 2 3 4 5 6x10 3 Transmission input speed (rpm) Power diagram for Pleasure Craft Duty Based on engine power B to DIN 6270; shock factor K = 1.25 to applied, if engine has 1 cylinder K = 1.20 for 2 cylinders K = 1.15 for 3 cylinders ** Max. 169 Nm (125 ft lb) admissible for main travelling direction with gear lever set to «B» MODEL RATIO POWER / RPM INPUT POWER CAPACITY MAX WEIGHT BELL HSGS. «A» Pos «B»Pos kW hp kW hp kW hp kW hp RPM kg lb AND NOTES 2800 rpm 3000 rpm 3600 rpm ZF 25 MA 2.227 2.737 0.0215 0.0288 60 81 64 86 77 104 5000 18 40 SAE 4, 5, B/W, Yanmar JH 2.737 2.737 0.0177 0.0237 50 66 53 71 64 85 5000 Max input power 80 kW. 8 degrees Ratio 2.227 «B» Pos. max torque 169 Nm. «A» POS = continuous running position (normally AHEAD). «B» POS = reverse position. B/W = Borg Warner adaptor. Note = For all «M» (Mechanical) transmission reduce power capacity by the following schock factors: 1 cylinder engine ÷ 1.25, 2 cylinder engine ÷ 1.20, 3 cylinder engine ÷ 1.15. hp 120 100 80 70 60 50 40 30
Fig. 11 ZF 25 MA Manual and Spare Parts List ZF M line B a) Clockwise rotation b) Oil dipstick and filler screw 17 mm c) M 10/15 deep, holes same on both sides d) Oil drain plug 17 mm width across flats e) SAE 26 teeth - DP 20/40 - 30° - Flat Root - Class t6 - f) Minimum lever travel 75 23
Page 1: Cod. 310.01.0052f SERVICE SERVICE M
Page 4 and 5: Table of contents 1. Description 1.
Page 6 and 7: 1.2.1 ZF 3 M 6 Manual and Spare Par
Page 8 and 9: 1.2.2 ZF 5 M 8 Manual and Spare Par
Page 10 and 11: 1.2.3 ZF 10 M 10 Manual and Spare P
Page 16 and 17: 1.2.6 ZF 15 MA 16 Manual and Spare
Page 18 and 19: 1.2.7 ZF 15 MIV 18 Manual and Spare
Page 24 and 25: 1.2.10 Accessories 24 Manual and Sp
Page 26 and 27: 1.2.10 Accessories 26 Manual and Sp
Page 28 and 29: 1.2.12 Gearboxes and accessories 28
Page 30 and 31: 1.6 Shaft bearings Both the input a
Page 32 and 33: 2.10 Cooling unit The arrangement o
Page 34 and 35: 34 Manual and Spare Parts List ZF M
Page 36 and 37: 5.8 Disassembling the output shaft
Page 38 and 39: 6. Reassembly Note: fold out illust
Page 40 and 41: 6.7 Pre-assembling the bearing shie
Page 42 and 43: 6.10.10 Attach shims (53,54,55, 56)
Page 44 and 45: 6.13.3 Measure dimension «c» on c
Page 46 and 47: 6.14 Mounting the actuating lever c
Page 48 and 49: 48 B A 8 9 10 11 Manual and Spare P
Page 50 and 51: 9. Spare Parts List 50 Manual and S
Page 52 and 53: ZF 3 M - ZF 5 M ZF 10 M HBW 10/ZF 1
Page 58 and 59: Item No 58 Manual and Spare Parts L
Page 60 and 61: SEAL + CLUTCH PACK KITS 60 Manual a
Page 62 and 63: BEARING KITS (ALL VERSIONS) 62 Manu
Page 64 and 65: 64 Manual and Spare Parts List ZF M
Page 66: 66 Manual and Spare Parts List ZF M

Service manual and spare parts list - BUKH Bremen

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?