See brochure with all the TP Models as PDF - Linddana A/S

Designed for heavy worktp 230 and tp 270Recommended if 60-70 % of the daily material hasa thickness from 5 cm and upwards.TP 230 and TP 270 are obvious choices if the wood chipis to be collected in a trailer, or if wood chipping is oftendone along roads or paths. Both wood chippers havea trailer hitch. The funnel faces sideways in relation tothe driving direction, which facilitates feeding materialinto the wood chipper, for instance when trimming windbreakers. Vertical feed rollers and a 45° chipping angleensure that even very twisted branches are drawn inforcefully and effectively.Powerful common features of TP 230 and TP 270• angled funnel• 45° chipping angle• vertical feed rollers• adjustable knives to allow variable wood chip size• possible to use TP WINCH or a crane system• integrated trailer hitch• TP PILOT/TP PILOT KTP 230 PTO with TP WINCHTP 230 PTO K with craneTP 230 GREENLINETP 230 – unique design with 90° angled funnelA powerful wood chipper with a folding funnel facing outto the side at a right angle, and an integrated trailerhitch for the collecting trailer. These both make TP 230ideal for working along roads, paths and hedges, whereeffective removal of branches and wood waste has highpriority. The machine is supplied with three knives,vertical feed rollers and a 45° chip ping angle, which alsoensures that very twisted branches are effectivelychipped. The replace able casing on the rotor housinghelps to reduce main tenance costs.• max. wood: ø230 mm, h230 x b240 mm• power requirement: 37 - 90 kW (50 - 120 hp)• no. of knives: 3 pcs.• wood chip size: 10 - 18 mm• capacity: up to 54 m 3 /hr• weight: PTO = 990 kgPTO K = 990 kg (excl. crane and crane support)GREENLINE = 2500 kgTP 270 PTO with TP WINCHTP 270 PTO KTP 270 PTO K FTP 270 – superior capacity with 45° funnelA powerful wood chipper with hydraulic feed rollers anda chipping angle of 45°, to ensure large capacity and aforceful in feed even of large trees. The funnel is at anangle of 45° to the driving direction, and providesoptimal working conditions in practically any situation. Themachine is equipped with three knives, rotating ejectorspout, trailer hitch and a replaceable casing in the rotorhousing (which helps to reduce maintenance costs).• max. wood: ø270 mm, h280 x b290 mm• power requirement: 75 - 150 kW (100 - 200 hp)• no. of knives: 3 pcs.• wood chip size: 11 - 21 mm• capacity: up to 76 m 3 /hr• weight: PTO = 1385 kgPTO K = 1345 kg (excl. crane and crane support)PTO K F = 1345 kg