Mali GPU User Interface Engine Application Development Guide

More documents

Recommendations

Info

Matrix and Vector Operationsmat4 perspective()matn rotation()Creates a 4x4 perspective transform matrix, constructed from the given field ofview, aspect angle, near plane, and far plane.mat4 perspectiveMatrix = mat4::perspective(45.0f, // field4.0f/3.0f, // aspect1.0f, // near plane1000.0f); // far planeThe perspective matrix is typically used with the camera view to create the worldview:mat4 world = mat4::identity(); // could be a translation or rotationmat4 proj = mat4::perspective(30.0f, 1.0f, 0.1f, 20.0f);mat4 view = mat4::lookAt(camPos, camTarget, upVector);mat4 wvpMatrix = proj * view * world;context->setUniformMatrix("WORLD_VIEW_PROJECTION", wvpMatrix);The vertex shader uses the world view to transform each point:attribute vec4 POSITION; // position of a point on the shapeWORLD_VIEW_PROJECTION; // transformation matrix passedvoid main(void){gl_Position = WORLD_VIEW_PROJECTION * POSITION;}Creates a nxn rotation matrix, calculated based on the passed axis and angleparameters. n is in the range 2 to 4.mat4 matrix = mat4::rotation(45.0, // angle to rotatevec3(1.0f, 0.0f, 0.0f)); // rotation axismatn scale()Creates a nxn scale matrix. n is 3 or 4.mat4 matrix = mat4::scale(2.0f, 2.0f, 2.0f); // x, y, z scale factorsmat4 toMat3()Creates a new matrix from the upper left 3x3 elements of the original matrix.mat4 m1;mat3 m2 = m1.toMat3();mat4 translation()Creates a 4x4 translation matrix. The parameters can be a vector or the x, y, andz translation values:vec3 trans_vec = vec3(2.0f, 3.0f, 4.0f);mat4 matrix = mat4::translation(2.0f, 3.0f, 4.0f);mat4 matrix = mat4::translation(trans_vec);The following vector functions in the MDE library simplify vector operations:vecn crossProduct()vecn length()Returns the cross product of two vectors. For two 3D vectors, the cross productresults in a vector that is perpendicular to both of the original vectors.Returns the length of the vector.vecn scale() Scale the vector by the elements of a vector or by a constant.ARM DUI 0527A-02a Copyright © 2010 ARM. All rights reserved. A-3ID070710Non-Confidential - Draft - Beta
Matrix and Vector Operationsvecn normalized()vecn operator*vecn operator+Returns the vector normalized to have a length of 1.0.If used with a vector, Performs n-component dot product between the vector andthe parameter vector.If used with a constant, Multiplies all vector components with the given scalarparameter, and returns new 4-component vector.There are versions for 3 and 4-element vectors.Performs component-wise vector addition of the vector and the given parametervector, and returns the result. There are versions for 3 and 4-element vectors.NoteFor a full list of MDE library functions and their parameters, open the index.html file in theinstall_dir\Mali GPU Engine x.y\docs\html directory.ARM DUI 0527A-02a Copyright © 2010 ARM. All rights reserved. A-4ID070710Non-Confidential - Draft - Beta
Page 1 and 2:
MaliGPU User Interface EngineVersio
Page 3 and 4:
ContentsMali GPU User Interface Eng
Page 5 and 6:
List of TablesMali GPU User Interfa
Page 7 and 8:
List of FiguresFigure 4-17 Environm
Page 9 and 10:
PrefaceAbout this bookThis is the M
Page 11 and 12:
PrefaceFeedbackARM welcomes feedbac
Page 13 and 14:
Introduction1.1 About the Mali GPU
Page 15 and 16:
IntroductionProxygetLoader()LoaderA
Page 17 and 18:
Chapter 2Tutorial on the System Cla
Page 19 and 20:
Tutorial on the System Classes2.2 C
Page 21 and 22:
Tutorial on the System ClassesFigur
Page 23 and 24:
Tutorial on the System ClassesDrawi
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Chapter 3Tutorial on Drawing 2D Sha
Page 31 and 32:
Tutorial on Drawing 2D Shapes...con
Page 33 and 34:
Tutorial on Drawing 2D ShapesFor ea
Page 36 and 37:
Tutorial on Drawing 2D ShapesExampl
Page 38 and 39:
Tutorial on Drawing 2D Shapes...ele
Page 40 and 41:
Page 42 and 43:
Tutorial on Drawing 2D ShapesFigure
Page 44 and 45:
Tutorial on Drawing 3D Shapes4.1 Dr
Page 46 and 47:
Page 48 and 49:
Tutorial on Drawing 3D Shapes4.2 Co
Page 50 and 51:
Tutorial on Drawing 3D Shapes4.3 Te
Page 52 and 53:
Tutorial on Drawing 3D Shapesvec3 c
Page 54 and 55:
Tutorial on Drawing 3D Shapes...0.5
Page 56 and 57:
Tutorial on Drawing 3D ShapesThe tr
Page 58 and 59:
Page 60 and 61:
Tutorial on Drawing 3D Shapes}vec4(
Page 62 and 63:
Tutorial on Drawing 3D Shapes...}//
Page 64 and 65:
Page 66 and 67:
Tutorial on Drawing 3D Shapes...{}i
Page 68 and 69:
Page 70 and 71:
Tutorial on Drawing 3D Shapesfloat
Page 72 and 73:
Tutorial on Drawing 3D Shapes}}prin
Page 74 and 75:
Tutorial on Drawing 3D Shapes4.6 Cu
Page 76 and 77:
Page 78 and 79:
Tutorial on Drawing 3D Shapescube_r
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Tutorial on Drawing 3D Shapes// Che
Page 86 and 87:
Tutorial on Drawing 3D Shapes...}if
Page 88 and 89:
Tutorial on Drawing 3D Shapes• th
Page 90 and 91:
Tutorial on Drawing 3D Shapes}{mat4
Page 92 and 93:
Tutorial on Drawing 3D Shapes}first
Page 94 and 95:
Tutorial on Drawing 3D ShapesoLight
Page 96 and 97:
Tutorial on Drawing 3D Shapes// spe
Page 98 and 99:
Tutorial on Drawing 3D Shapes}}prin
Page 100 and 101:
Tutorial on the Lotion User Interfa
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119: Tutorial on the Lotion User Interfa
Page 140 and 141: Chapter 6Tutorial on Constructing C
Page 142 and 143: Tutorial on Constructing Custom Sha
Page 166 and 167: Appendix AMatrix and Vector Operati
Page 170 and 171: GlossaryThis glossary describes som
Page 172: GlossaryShader LibraryVertex shader
show all

Mali GPU User Interface Engine Application Development Guide

Create successful ePaper yourself

Delete template?

Save as template?