Sempergreen® Flexipanel 60-50 - Sisteme-fatade.ro

<strong>Sempergreen®</strong> <strong>Flexipanel</strong> <strong>60</strong>-<strong>50</strong>Flexible Lightweight Green Wall SystemStandard sizeSystem saturated weightSystemPlant selectionModuleModule FixingModule Fixing as cladding facadeModule SizeWater retention layerFiltration SystemBack flow preventerSubstrate<strong>60</strong>0mm(w)x<strong>50</strong>0mm(h)x<strong>60</strong>mm(d)<strong>50</strong>kgs per m2A pocket planted lightweight inorganicsubstrate system. Rockwool based carrierwith systemic feed and irrigation system.The growing area is mechanically fixed toreinforced rubber membrane that mounts towall fixings. The system is mounted usingaluminum profiles to a waterproofed wall.Plant selection is defined by aestheticrequirement, aspects, location, exposureand maintenance requirements.Special UV stabilized water absorptionfleece on top of rockwool block carrierattached mechanically to a reinforced UVresistant rubber membrane.Vertical aluminum profile attached to awaterproofed wall. Planted module fixed tothe profiles by a metal fastener.Special designed aluminum profiles attachedto the wall. Insulation layer used on topof the aluminum frame holders. The panelsare mechanically attached to the frameusing fasteners and extra securityhorizontal piece can be used in higherinstallations walls.<strong>50</strong>0mm(h), <strong>60</strong>0mm(w), <strong>60</strong>mm(d)The planting material is designed to holdand distribute water to all areas evenlyand consistently.Filter units are part of the irrigation andfeed systemTo prevent contamination of water supply,connection to an in line tank might berequired. Positioned between system andwater source within filtration unit.Rockwool based module with drilled outsections for planting____________________________________________________________________________________________________________Sempergreen Vertical Systems BVPostbus 9873700 AZ Zeist, The Netherlands

Irrigation SystemWater pressure/Flow rateWater usagePlanting DensityCoveragePlant Type IndoorsPlant Type (Foliage Walls)Pressure compensating lines to independentmodules, connectors to delivery lines andconnectors to source 12-15mm. Includesbackflow preventer, pressure regulator,timer, filter system, drain valve and allconnections.When the water pressure is high enough(minimum of 3.5 bars/<strong>60</strong>0 litres per hour),the system is also capable of operatingwithout having to use a pressure boost pump(break tank arrangement).System specific, calculated project byproject. Irrigation will need to be basedon a 7 day program. Daily rates will varyfrom 1 to 4L per m2 depending ontemperature, pressure and plant selection.100 plants per m2 of designated blend tosuit location based on plants list seenattachedInitially 80-90% can be expected, at sometime of the year some species might die orchange color, coloration changes andseasonal gaps should be expectedAs per list attachedAs per list attachedFeed Tank and dosing systemWall HabitatsBreak TanksPump SystemsThe system requires a feed dosing unit thatwill deliver liquid fertilizer to the mainirrigation feed through and injection pump.Feed tanks range from 5-20L depending onthe size of wall.If required a range of nesting, insects,bat or butterfly boxes can be built intothe units.In line tanks for ground or roof placementto separate direct feed to wall from watersource. Can be placed underneath irrigationcabinet, if space is available.A pump will be required with everyinstallation to manage water and ensuresufficient pressure to irrigate the wall____________________________________________________________________________________________________________Sempergreen Vertical Systems BVPostbus 9873700 AZ Zeist, The Netherlands

Feed SystemControllerStandard Cabinet for irrigationconsistently.In line feed tank with injection pump anddosing unit, with low level fertilizerindicator.Single phase or multi zone controller<strong>60</strong>0mm(h)x800mm(w)x300(d) all controls,injection pump and feed tank are placedinside the cabinet.Establishment:The system will take 4-6 months to establish under green house andthen hardening conditions. Young species are developed to producethe plants for the modules and systems are constructed to order.Plants will take longer to develop depending on the time of yearMaintenance:It is recommended to carry out annual maintenance at least 4 times ayear to remove invasive plants and weed species and to prune ifnecessary. Also to remove dead leaves and replace plants whenrequired.For the winter period, special maintenance procedures should befollowed. Please check our maintenance guide for more information.Initial Estimate time for Maintenance IrrigationCoverage full coverage Requirements Requirements90% 6-8 months Medium Required asStandardSustainabilityVery GoodGeneral Description:A sustainable Flexible lightweight system with uncomplicated andfast installation, that provides a range of high aesthetic costeffective cladding and screening.____________________________________________________________________________________________________________Sempergreen Vertical Systems BVPostbus 9873700 AZ Zeist, The Netherlands

STRUCTURE BY OTHERSconcrete or hollow block asspecified by engineerALUMINUM-SPACERSXR 10x80 TIRRIGATION DRIPPING LINESV <strong>60</strong>-<strong>50</strong> PANELBOLTMETAL WASHER