Testo 350 Calibration - Actoolsupply.com

www.actoolsupply.comtesto 350: The world’s most advanced emission analyserFor portable use in industrial systems, the measuring instrument must be robust and as easy as possible to transport.Ideally, the unit will remain in its case during operation. A further problem comes with the distance between the gassampling point and the burner (= place of measurement). That’s why the control unit in the testo 350 M/XL can bedetached, enabling it to be used at distances of up to several hundred metres from the analyser box. While on the subjectof gas preparation: from short spot measurement through to measurements lasting several hours, the use of a gaspreparation in the industrial sector is a must. Only then can precise measurements, for example of NO Xor SO 2, beachieved, while the measuring instrument is also protected against aggressive condensation from the flue gas. Giventhe pressure on time, the reliability and guaranteed availability of the measuring instrument are very important for theuser. This ensures that consumables such as measuring cells can be replacedon site by the user himself.Design of the testo 350 M/XL systemControlAnalyserPCMCIAplug-in cardTesto data busLog-m/s, t/am A outD hPa, mbarParametersanalyser boxNO x, SO 2, O 2,ParametersloggerPowerboxm/s, m 3 /hD hPa, PaC% RH33The corresponding flue gas and flowprobes as well as temperatureprobes are available for the differentapplications. Flue gas probes areavailable in lengths ofup to 4 m, 1,700 °C and/or heated(to avoid condensation). There aretemperature probes for surface, gasand fluid measurements. With flowprobes, vane and hot-wire/hot-bulbwww.actoolsupply.comprobes can be connected to thecontrol unit as well as the pitottubes.33