proform l18 - ICON Health & Fitness, Inc. Customer Service

TABLE OF CONTENTSIMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back CoverFULL 90-DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back CoverNote: An EXPLODED DRAWING is attached in the center of this manual.IMPORTANT PRECAUTIONSWARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read thefollowing important precautions and information before operating the treadmill.1. It is the responsibility of the owner to ensurethat all users of this treadmill are adequatelyinformed of all warnings and precautions.2. Use the treadmill only as described in thismanual.3. Place the treadmill on a level surface, with atleast eight feet of clearance behind it. Do notplace the treadmill on any surface that blocksair openings. To protect the floor or carpetfrom damage, place a mat under the treadmill.4. Keep the treadmill indoors, away from moistureand dust. Do not put the treadmill in agarage or covered patio, or near water.5. Do not operate the treadmill where aerosolproducts are used or where oxygen is beingadministered.6. Keep children under the age of 12 and petsaway from the treadmill at all times.7. The treadmill should not be used by personsweighing more than 250 pounds.8. Never allow more than one person on thetreadmill at a time.9. Wear appropriate exercise clothing whenusing the treadmill. Do not wear loose clothingthat could become caught in the treadmill.Athletic support clothes are recommended forboth men and women. Always wear athleticshoes. Never use the treadmill with bare feet,wearing only stockings, or in sandals.10. When connecting the power cord (see page 7),plug the power cord into a surge suppressor(not included) and plug the surge suppressorinto a grounded circuit capable of carrying 15or more amps. No other appliance should beon the same circuit. Do not use an extensioncord.11. Use only a single-outlet surge suppressorthat is UL 1449 listed as a transient voltagesurge suppressor (TVSS). The surge suppressormust have a UL suppressed voltage ratingof 400 volts or less and a minimum surge dissipationof 450 joules. The surge suppressormust be electrically rated for 120 volts AC and15 amps.12. Keep the power cord and the surge suppressoraway from heated surfaces.13. Never move the walking belt while the poweris turned off. Do not operate the treadmill ifthe power cord or plug is damaged, or if thetreadmill is not working properly. (SeeBEFORE YOU BEGIN on page 4 if the treadmillis not working properly.)2

ASSEMBLYAssembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do notdispose of the packing materials until assembly is completed. Assembly requires the included allen wrenchand your own phillips screwdriver and adjustable wrench .1. With the help of a second person, carefully raise thetreadmill to the upright position. While a second persontips the treadmill to one side and holds it, insert one ofthe Extension Legs (103) into the treadmill as shown.Make sure that the Extension Leg is turned so theWarning Decal (20) is on top.Next, tip the treadmill to the other side and insert theother Extension Leg (not shown) in the same way. Lowerthe side of the treadmill so that both Extension Legs(103) are resting flat on the floor.1201032. Refer to HOW TO LOWER THE TREADMILL FORUSE on page 10. Follow the instructions in step 2 tolower the treadmill.Attach the latch spacer and the latch support to the leftUpright (82) with a 3/4Ó Screw (81). Make sure that theScrew is tight, but do not overtighten it; if the Screwis overtightened, the latch will not slide smoothly.2Spacer77 81818277SpringsRefer to the inset drawing. Assemble the latch in thebracket with the springs as shown.SupportAttach the Latch (77) to the left Upright (82) with two3/4Ó Screws (81).BracketLatch3. Slide the upper end of a Handrail (75) onto the rightUpright (82) as shown. Note: It will be necessary topivot the Handrail to the side and back repeatedly(see arrow A) while pushing on the Handrail (seearrow B) to slide it fully onto the Upright. Next, pivotthe lower end of the Handrail down, push it toward theright Upright, and then align it with the indicated hole.Slide the other Handrail (75) onto the left Upright (82) asdescribed above.3758275B82AHole5

12Insert the key fully into the power switch.Inserting the key willnot turn on the displays.The displays willturn on when theON/RESET button ispressed or when thewalking belt is started.Note: If you justinstalled batteries, the displays will already be on.Reset the speed control.Slide the speed controlto the RESET position.Note: Each time thewalking belt isstopped, the speedcontrol must bemoved to the RESETposition before thewalking belt can berestarted.pleted 1/4 mile. A new lap will then begin.DISTANCE displayÑThis display shows thedistance that you havewalked or run, in miles.CALS/FAT CALSArrowdisplayÑThis displayshows the approximatenumbers of caloriesand fat calories youhave burned. (See FATBURNING on page 13.)Every seven seconds, the display will change fromone number to the other. Arrows in the display willindicate which number is currently shown.SPEED displayÑThisdisplay shows thespeed of the walkingbelt, in miles per hour.3Start the walking belt.After you have moved the speed control to theRESET position, slowly slide it to the right until thewalking belt begins to move at slow speed.Carefully step onto the walking belt and begin exercising.Change the speed of the walking belt asdesired by sliding the speed control.TIME displayÑThisdisplay shows theelapsed time.To reset the displays atany time, press theON/RESET button.4To stop the walking belt, step onto the foot railsand slide the speed control to the RESET position.Adjust the incline of the treadmill as desired.To change the incline ofthe treadmill, press thetop or bottom of the inclinecontrol until thedesired incline level isreached.6When you are finished exercising, stop thewalking belt and remove the key.Step onto the foot rails, stop the walking belt andremove the key from the console. The displays willturn off about five minutes after the key is removed.Note: To conserve the batteries, the displayswill automatically turn off any time that thewalking belt is stopped and the ON/RESETbutton is not pressed for five minutes.5Follow your progress with the LED track andthe four displays.The LED TrackÑTheLED track represents adistance of 1/4 mile. Asyou exercise, the indicatorsaround the trackwill light one at a timeuntil you have com-9

HOW TO FOLD AND MOVE THE TREADMILLHOW TO FOLD THE TREADMILL FOR STORAGEBefore folding the treadmill, adjust the incline to thelowest position. If this is not done, the treadmill may bepermanently damaged. Next, unplug the power cord.CAUTION: You must be able to safely lift 45 pounds (20kg) in order to raise, lower, or move the treadmill.11. Hold the treadmill with your hands in the locations shownat the right. CAUTION: To decrease the possibility of injury,bend your legs and keep your back straight. Asyou raise the treadmill, make sure to lift with your legsrather than your back. Raise the treadmill about halfwayto the vertical position.2. Move your right hand to the position shown and hold thetreadmill firmly. Using your left thumb, slide the storagelatch to the left and hold it. Raise the treadmill until thestorage latch closes over the catch. Make sure that thestorage latch is fully closed over the latch catch.2OpenTo protect the floor or carpet from damage, place amat under the treadmill. Keep the treadmill out ofdirect sunlight. Do not leave the treadmill in the storageposition in temperatures above 85¡ Fahrenheit.StorageLatchLatchCatchClosedHOW TO MOVE THE TREADMILLBefore moving the treadmill, convert the treadmill to the storageposition as described above. Make sure that the storagelatch is closed fully over the catch.1. Hold the handrails as shown and place one foot against awheel. Do not hold or push on the book holder or thebook holder may be damaged.2. Tilt the treadmill back until it rolls freely on the front wheels.Carefully move the treadmill to the desired location. Nevermove the treadmill without tipping it back. To reducethe risk of injury, use extreme caution while movingthe treadmill. Do not attempt to move the treadmillover an uneven surface.3. Place one foot on the base, and carefully lower the treadmilluntil it is resting in the storage position.HOW TO LOWER THE TREADMILL FOR USE3Book HolderBaseFront Wheels1. Refer to drawing 2 above. Hold the upper end of the treadmill with your right hand as shown. Using your leftthumb, slide the storage latch to the left and hold it. Pivot the treadmill down until the frame is past the storagelatch.2. Refer to drawing 1 above. Hold the treadmill firmly with both hands, and lower the treadmill to the floor.CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight.10

TROUBLE-SHOOTINGMost treadmill problems can be solved by following the simple steps below. Find the symptom thatapplies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays).1. SYMPTOM: THE POWER DOES NOT TURN ONa. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is pluggedinto a properly grounded outlet (see page 7). Use only a single-outlet surge suppressor that is UL 1449listed as a transient voltage surge suppressor (TVSS). The surge suppressor must have a UL suppressedvoltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressormust be electrically rated for 120 volts AC and 15 amps.b. After the power cord has been plugged in, make sure that the key is fully inserted into the console. See step1 on page 8.c. Check the circuit breaker located on the treadmill near thepower cord. If the switch protrudes as shown, the circuitbreaker has tripped. To reset the circuit breaker, wait for fiveminutes and then press the switch back in.cTrippedReset2. SYMPTOM: THE POWER TURNS OFF DURING USETrippedReseta. Check the circuit breaker located on the treadmill frame near the power cord (see 1. c. above). If the circuitbreaker has tripped, wait for five minutes and then press the switch back in.b. Make sure that the power cord is plugged in.c. Remove the key from the console. Reinsert the key fully into the console. See step 1 on page 9.d. If the treadmill still will not run, please call our toll-free HELPLINE.3. SYMPTOM: THE DISPLAYS OF THE CONSOLE DO NOT FUNCTION PROPERLYa. Remove the six screws from the hood. Carefully remove thehood. Locate the Reed Switch (21) and the Magnet (43) on theleft side of the Pulley (42). Turn the Pulley until the Magnet isaligned with the Reed Switch. Make sure that the gap betweenthe Magnet and the Reed Switch is about 1/8Ó. If necessary,loosen the Reed Switch Screw (76) and move the Reed Switchslightly. Retighten the Screw. Re-attach the hood, and run thetreadmill for a few minutes to check for a correct speed reading.1/8Ó7621TopView424311

PROBLEM: The walking belt slows when walked onSOLUTION: a. Use only a UL-listed surge suppressor, rated at 15 amps, with a 14-gauge cord of five feet or lessin length.b. If the walking belt is overtightened, treadmill performancemay decrease and the walking belt may bepermanently damaged. Remove the key and UN-PLUG THE POWER CORD. Using the allen wrench,turn both rear roller adjustment bolts counterclockwise,1/4 of a turn. When the walking belt is properlytightened, you should be able to lift each side of thewalking belt 3 to 4 inches off the walking platform. Becareful to keep the walking belt centered. Plug in thepower cord, insert the key and run the treadmill for afew minutes. Repeat until the walking belt is properlytightened.b3ÓÐ4ÓRear Roller Adjustment Boltsc. If the walking belt still slows when walked on, please call our toll-free HELPLINE.PROBLEM: The walking belt is off-center when walked onSOLUTION: a. If the walking belt has shifted to the left, first removethe key and UNPLUG THE POWER CORD. Usingthe allen wrench, turn the left rear roller adjustmentbolt clockwise, and the right bolt counterclockwise,1/4 of a turn each. Be careful not to overtighten thewalking belt. Plug in the power cord, insert the keyand run the treadmill for a few minutes. Repeat untilthe walking belt is centered.ab. If the walking belt has shifted to the right, first removethe key and UNPLUG THE POWER CORD. Usingthe allen wrench, turn the left rear roller adjustmentbolt counterclockwise, and the right bolt clockwise,1/4 of a turn each. Be careful not to overtighten thewalking belt. Plug in the power cord, insert the keyand run the treadmill for a few minutes. Repeat untilthe walking belt is centered.bPROBLEM: The walking belt slips when walked onSOLUTION: a. If the walking belt slips when walked on, first removethe key and UNPLUG THE POWER CORD. Usingthe allen wrench, turn both rear roller adjustmentbolts clockwise, 1/4 of a turn. When the walking beltis correctly tightened, you should be able to lift eachside of the walking belt 3 to 4 inches off the walkingplatform. Be careful to keep the walking belt centered.Plug in the power cord, insert the key and carefullywalk on the treadmill for a few minutes. Repeat untilthe walking belt is properly tightened.a12

CONDITIONING GUIDELINESWARNING: Before beginningthis or any exercise program, consult yourphysician. This is especially important for individualsover the age of 35 or individualswith pre-existing health problems.The following guidelines will help you to plan your exerciseprogram. RememberÑthese are general guidelinesonly. For more detailed exercise information, obtaina reputable book or consult your physician.EXERCISE INTENSITYWhether your goal is to burn fat or to strengthen yourcardiovascular system, the key to achieving the desiredresults is to exercise with the proper intensity.The proper intensity level can be found by using yourheart rate as a guide. The chart below shows recommendedheart rates for fat burning and aerobic exercise.(This chart is also found on the console.)training zone. It may also be helpful to set the speedcontrol on the console to FAT BURN to help you maintainthe proper intensity level. (See page 9.)Aerobic ExerciseIf your goal is to strengthen your cardiovascular system,your exercise must be Òaerobic.Ó Aerobic exerciseis activity that requires large amounts of oxygen forprolonged periods of time. This increases the demandon the heart to pump blood to the muscles, and on thelungs to oxygenate the blood. For aerobic exercise,adjust the speed and incline of the treadmill until yourheart rate is near the highest number in your trainingzone. It may also be helpful to set the speed control onthe console to AEROBIC to help you maintain theproper intensity level. (See page 9.)High Performance Athletic ConditioningIf your goal is high performance athletic conditioning,set the speed control on the console to PERFOR-MANCE to help you maintain the proper intensity level.(See page 9.) Note: During the first few weeks of yourexercise program, keep your heart rate near the lowend of your training zone.HOW TO MEASURE YOUR HEART RATETo find the proper heart rate for you, first find your ageon the left side of the chart (ages are rounded off tothe nearest ten years). Next, find the three numbers tothe right of your age. The three numbers are yourÒtraining zone.Ó The lower two numbers are recommendedheart rates for fat burning; the higher numberis the recommended heart rate for aerobic exercise.Fat BurningTo burn fat effectively, you must exercise at a relativelylow intensity level for a sustained period of time. Duringthe first few minutes of exercise, your body uses easilyaccessible carbohydrate calories for energy. Only afterthe first few minutes does your body begin to usestored fat calories for energy. If your goal is to burn fat,adjust the speed and incline of the treadmill until yourheart rate is near one of the lower two numbers in yourTo measure yourheart rate, stop exercisingand placetwo fingers onyour wrist asshown. Take a sixsecondheartbeatcount, and multiplythe result by ten tofind your heartrate. (A six-second count is used because your heartrate drops quickly when you stop exercising.) If yourheart rate is too high or too low, adjust the speed or inclineof the treadmill accordingly.WORKOUT GUIDELINESA well-rounded workout includes the following threeimportant parts:A Warm-upStart each workout with 5 to 10 minutes of stretchingand light exercise (see SUGGESTED STRETCHES onpage 14). A proper warm-up increases your bodytemperature, heart rate, and circulation in preparationfor exercise.13

Training Zone ExerciseAfter warming up, increase the intensity of your exerciseuntil your pulse is in your training zone for 20 to60 minutes. (During the first few weeks of your exerciseprogram, do not keep your pulse in your trainingzone for longer than 20 minutes.) Breathe regularlyand deeply as you exerciseÑnever hold your breath.A Cool-downFinish each workout with 5 to 10 minutes of stretchingto cool down. This will increase the flexibility of yourmuscles and will help to prevent post-exercise problems.Exercise FrequencyTo maintain or improve your condition, complete threeworkouts each week, with at least one day of rest betweenworkouts. After a few months, you may completeup to five workouts each week if desired.The key to success is to make exercise a regular andenjoyable part of your everyday life.SUGGESTED STRETCHESThe correct form for several basic stretches is shown in thedrawings below. Move slowly as you stretchÑnever bounce.11. Toe Touch StretchStand with your knees bent slightly and slowly bend forwardfrom your hips. Allow your back and shoulders to relax as youreach down toward your toes as far as possible. Hold for 15counts, then relax. Repeat 3 times. Stretches: Hamstrings,back of knees, and back.22. Hamstring StretchSit with one leg extended. Bring the sole of the opposite foottoward you and rest it against the inner thigh of your extendedleg. Reach toward your toes as far as possible. Hold for 15counts, then relax. Repeat 3 times for each leg. Stretches:Hamstrings, lower back, and groin.33. Calf/Achilles StretchWith one leg in front of the other, reach forward and place yourhands against a wall. Keep your back leg straight and yourback foot flat on the floor. Bend your front leg, lean forward andmove your hips toward the wall. Hold for 15 counts, then relax.Repeat 3 times for each leg. To cause further stretching of theachilles tendons, bend your back leg as well. Stretches:Calves, achilles tendons, and ankles.44. Quadriceps StretchWith one hand against a wall for balance, reach back andgrasp one foot with your other hand. Bring your heel as closeto your buttocks as possible. Hold for 15 counts, then relax.Repeat 3 times for both legs. Stretches: Quadriceps and hipmuscles.55. Inner Thigh StretchSit with the soles of your feet together and your knees outward.Pull your feet toward your groin area as far as possible. Holdfor 15 counts, then relax. Repeat 3 times. Stretches:Quadriceps and hip muscles.14

PART LISTÑModel No. 831.298070R1298AKey No. Qty. Description Key No. Qty. Description1 1 Motor Belt2 1 Pulley/Flywheel/Fan3 4 Motor Nut4* 1 Motor/Pulley/Flywheel/Fan5 3 Incline Motor Bolt6 1 Incline Motor Spacer7 1 Incline Motor8 1 Stop Bracket9 1 Small Nut10 2 Star Washer11 1 Optic Switch12 1 Frame13 1 Small Bolt14 1 Incline Optic Disk15 8 Incline Motor Nut16 16 Screw17 4 Plastic Stand-Off18 2 Hood Bracket (short)19 2 Hood Bracket (long)20 2 Warning Decal21 1 Reed Switch22 1 Reed Switch Clip23 1 Motor/Controller Wire24 1 Controller25 1 Electronics Bracket26 1 Circuit Breaker27 1 Power Cord28 1 Power Cord Grommet29 4 Motor Star Washer30 1 Inlet Bracket31 1 Incline Leg32 2 Frame Pivot Bolt33 2 Frame Pivot Spacer34 3 Hood Bracket Clip35 1 Front Roller Adj. Bolt36 3 Roller Adj. Washer37 1 Choke38 4 Motor Bolt39 2 Cap Screw40 1 Left Foot Rail Cap41 2 Foot Rail42 1 Front Roller/Pulley43 1 Magnet44 4 Platform Screw45 4 Isolator46 4 Isolator Screw47 17 Belly Pan Fastener48 1 Wire Harness49 2 Belt Guide50 1 Console Cover51 1 Front Belly Pan52 1 Power Supply53 2 Cable Tie Clamp54 1 Cable Tie55 1 Walking Belt56 2 Roller Guard57 1 Rear Roller58 2 Rear Isolator59 2 Rear Foot60 2 Rear Foot Screw61 1 Ground Wire62 1 Ground Wire Screw1563 1 Belly Pan64 1 Rear Endcap65 2 Rear Roller Adj. Bolt66 1 Motor67 1 Latch Decal68 4 Rear Platform Screw69 2 Catch Screw70 1 Latch Catch71 1 Walking Platform72 5 8Ó cable Tie73 4 4Ó cable Tie74 1 Front Roller Adj. Nut75 2 Handrail76 7 Reed Switch Screw/Belly Pan Screw77 1 Storage Latch78 2 Handrail Bolt79 4 Long Screwl80 1 Speed Control81 2 3/4Ó Screw82 1 Upright83 2 Incline Leg Pivot Bolt84 2 Incline Leg Pivot Washer85 1 Incline Control86 2 Wheel Bolt87 1 Console Base88* 1 Console89 8 Console Screw90 1 Key/Clip91 1 Incline Motor Plate92 2 Wheel Nut93 6 Hood Screw94 1 Motor Hood95 2 Front Wheel96 4 Handrail Washer97 4 Base Pad98 4 Base Pad Screw99 1 Wrench Clip100 1 Allen Wrench101 8 Short Screw102 1 Upright Hole Plug103 2 Extension Leg104 2 Extension Leg Cap105 1 Shock106 1 Upright Grommet107 1 Incline Motor Shield108 1 Book Holder109 1 Right Foot Rail Cap110 4 Endcap Clip111 2 Foot Rail Insert112 1 Motor Tension Nut113 1 Motor Tension Bolt# 1 8Ó Blue Wire, 2 Female# 1 4Ó Blue Wire, 2 Female# 1 10Ó White Wire, 2 Female# 1 4Ó White Wire, Male/Female# 1 9Ó Wire Harness# 1 4Ó Black Wire Harness, 2 Female# 1 4Ó Green Wire, F/Ring# 1 User's Manual* Includes all parts shown in the box# These parts are not illustrated

4127281630162625162418161585 7613191651535363233153137163839151576181622213134*2394010933434232454446444546417155444445764946471647454647476253545960626164586560594763565767565870697676511510111014966366536686876110110122317521111111121137529343434EXPLODED DRAWINGÑModel No. 831.298070 R1298A

907997981031001697981079798998384848382779393939410191106621048692959798103104727310510174818579878989898988*758695929348508010220204810878961017896EXPLODED DRAWINGÑModel No. 831.298070 R1298A

Model No. 831.298070QUESTIONS?If you find that:¥ you need help assembling oroperating the PROFORM L18treadmill¥ a part is missing¥ or you need to schedule repairservicecall our toll-free HELPLINE1-800-736-6879MondayÐSaturday, 7 amÐ7 pmCentral Time (excluding holidays)The model number and serial number of your PROFORM¨ L18treadmill are listed on a decal attached to the frame. See the frontcover of this manual to find the location of the decal.All replacement parts are available for immediate purchase orspecial order when you visit your nearest SEARS Service Center.To request service or to order parts by telephone, call the toll-freenumbers listed at the left.When requesting help or service, or ordering parts, please beprepared to provide the following information:¥ The NAME OF THE PRODUCT (PROFORM¨ L18 treadmill)¥ The MODEL NUMBER OF THE PRODUCT (831.298070)¥ The KEY NUMBER AND DESCRIPTION OF THE PART (see theEXPLODED DRAWING and PART LIST included in this manual)REPLACEMENTPARTSIf parts become worn and needto be replaced, call the followingtoll-free number1-800-FON-PART(1-800-366-7278)FULL 90 DAY WARRANTYFor 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in thisSEARS TREADMILL EXERCISER, contact the nearest SEARS Service Center throughout the UnitedStates and SEARS will repair or replace the TREADMILL EXERCISER, free of charge.This warranty does not apply when the TREADMILL EXERCISER is used commercially or for rental purposes.This warranty gives you specific legal rights, and you may also have other rights which vary from stateto state.SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179Part No. 151173 H04284-C R1298APrinted in USA © 1998 Sears, Roebuck and Co.