TMS320C5x DSP STARTER KIT USER'S GUIDE

Step 1: Connecting the DSK to Your PC2.2 Step 1: Connecting the DSK to Your PCFollow these steps to connect your DSK board to your PC:1) Turn off your PC’s power.2) Connect your RS-232 cable to either communication port 1 or 2 on your PC.3) Connect your RS-232 cable to a 25-to-9 pin adapter, if necessary.4) Plug the RS-232 cable (or adapter) into the DSK board. Refer toFigure 2–2 for details.Figure 2–2. Connecting Your RS-232 Cable Into Your DSK BoardAnalog interfacecircuitSystem clockPlug your RS-232 cable into this socket (DB9 female)Analog inAnalog outTMS320C50Power supplyconnectorPROM store kernel programFor schematics and more detail on the DSK board, refer to Appendix A.5) Connect the 9-V ac transformer onto the DSK board. Refer to Figure 2–2for details.6) Plug the transformer into a wall socket.7) Turn your PC’s power on.Note:The following are suitable RS-232 connections: DB9 male connected to DB25 female DB9 male connected to DB9 femaleInstalling the DSK Assembler and Debugger2-5