001021 - Agfa HealthCare

HE/ITR&D/SIV/RK001021 Page 20 of 36Document No. 001021, Revision 1.0Agfa HealthCare 24 May, 2005Attribute Tag Value User or Service Configurable?>Samples PerPixel>PhotometricInterpretation(0028,0002) 1(0028,0004) MONOCHROME1,MONOCHROME2>Rows (0028,0010) > 0>Columns (0028,0011) > 0>Pixel AspectRatio(0028,0034) Only sent in not:10000/10000>Bits Allocated (0028,0100) 8>Bits Stored (0028,0101) 8>High Bit (0028,0102) 7>Pixel(0028,0103) 0Representation>Pixel Data(7FE0,0010)The following status codes are recognized in response to a N-SET:ServiceStatusFurther MeaningTable 2-24 N-SET Response Status codesStatusCode(0000,0900)ReasonSuccess Success 0000H Operation successfully completed.Warning Attribute out of range 0116H Returned if an attribute is out of the rangeFailure Failure If the SCP AE returns any other error or warning status, thePaxport will abort the association.2.2.1.3.3.3.4 Specific Conformance for Printer SOP ClassThe Paxport provides support for the following DIMSE Services:— N-GET— N-EVENT-REPORT2.2.1.3.3.3.4.1 Printer SOP Class Operations for N-GETThe Paxport uses the Printer SOP Class N-GET operation to obtain information about the current printerstatus.2.2.1.3.3.3.4.2 Supported DICOM Elements and Status codes for N-GETTable 2-25Printer SOP Class N-GET sent AttributesAttribute Tag Valid RangeManufacturer (0008,0070) Provided by printer