001021 - Agfa HealthCare

HE/ITR&D/SIV/RK001021 Page 17 of 36Document No. 001021, Revision 1.0Agfa HealthCare 24 May, 2005The Paxport provides the following support for the Film Session attributes sent by the N-CREATE DIMSEservice:Table 2-17 BASIC FILM SESSION SOP CLASS N-CREATE SENT ATTRIBUTESAttribute Tag Value User or Service Configurable?Copies (2000,0010) 1 User SelectablePrint Priority (2000,0020) LOW, HIGH User SelectableMedium Type (2000,0030) (Printer Dependent) Service ConfigurableFilm Destination (2000,0040) PROCESSOR NoFilm Session Label (2000,0050)Patient name orCalling AE TitleThe following status codes are recognized in response to a N-CREATE:Table 2-18 N-CREATE Response Status codesServiceStatusFurtherMeaningStatus Code(0000,0900)ReasonSuccess Success 0000 Operation successfully completed.WarningWarningElementsdiscardedAttribute Valueout of rangeB006Indicates that some elements are discarded, but that the imagewas stored anyway.0116 Indicates that a certain attribute value is out of range, but thatthe image was stored anyway (Agfa printers only).Failure Failure If the SCP AE returns any other error or warning status thandescribed in this table, the Paxport will abort the association.2.2.1.3.3.3.1.2 Supported DICOM Elements and Status codes for N-ACTION:The Paxport issues an N-ACTION to print a Film Session.The following status codes are recognized in response to a N-ACTION:Table 2-19 N-ACTION Status codesServiceStatusFurtherMeaningStatus Code(0000,0900)ReasonSuccess Success 0000 Operation successfully completed.Failure Failure If the SCP AE returns any other error or warning status thandescribed in this table, the Paxport will abort the association.