House - Australian Institute of Architects

More documents

Recommendations

Info

EMAEric Martin and AssociatesRAIA RSTCA UIA Nominations2K02RAIA Format A report on the state of the building in order to point at protection needs, Six categories of criteria open to modification so as to bring contextual or national specificity to the fore.In this table both the criteria and their values are to be filled.Name of the Criteria column indicates the name of the element of description required (example: "Date ofdesign").Importance of the criteria column lets you to point at the particularly importance of one or severalelements of description of the building. You can here indicate (decreasing order A,B,C,D,E) whether anelement of description appears to you as decisive in its selection for the index.Not known elements of description may of course be left empty.RAIA DBfieldName of the CriteriaImportanceof thecriteriaYour Building______________________________________________________________________________________________________________________________________________________________T:\Communications Manager\UIA Heritage Register Citations\ICI_House.doc 2
EMAEric Martin and AssociatesRAIA RSTCA UIA Nominations2K02RAIA FormatRAIA DBfieldName of the CriteriaImportanceof thecriteriaYour BuildingTABLE n° 1 : DESCRIPTION OF BUILDING / SITEMODULE 1 : IDENTITY OF THE BUILDING / SITECurrent nameOrica HousePrevious or other name(s) ICI (Name changed to Orica in 1998)Present ownerMacquarie BankStatus of the ownerAn independent Australasian companyMaterials and techniquesThe structure for ICI House is a rigid steelframe with insitu concrete floor slabs up to thefourth floor, with the remaining upper levelsbeing precast concrete floor units of invertedchannel sections (tubs) spanning 12ft (3.6m)between steel beams. This was then toppedwith a concrete slab. The steel frame for thebuilding was site-welded, allowing the end wallsto have precast concrete panels hung off themand then covered by the glass-aluminiumcurtain wall.The glass used for the curtain wall spandrelsand the end walls is a dusky blue ceramicenamelled glass imported from Belgium.The cladding material of the lift tower isreconstructed polished granite wall slabs, thefirst major use of this material in Australia. Thepanels are fixed by brass bolts which passthrough the structural steel and are then boltedinto brass sockets cast into the slabs.The granite used is grey crushed granite fromKingston, South Australia.DescriptionThe building is an open plan concrete encasedsteel framed structure elevated on pilotis overwhat was originally an open undercroft. Themain body of the building is clad with framedglazed curtain walling. The floors of thebuilding are of precast concrete invertedchannel sections panels. The building iscomprised of 21 stories, including the groundfloor and two floors below ground. The servicecore is expressed as a separate element fromthe main glass clad body of the building.Year of project design 1955Year of beginning of construction 1956Year of end of construction 1958Initial Design (if differs fromdescription) and changesThe initial design differed significantly from whatwas to become the final scheme. The heightand postiion on site of the lift tower (20 storeys)and the tower (19 storeys and roof structure)were all to change. In August 1955, thebuilding had open ground space all around the______________________________________________________________________________________________________________________________________________________________T:\Communications Manager\UIA Heritage Register Citations\ICI_House.doc 3
Page 1: EMAEric Martin and AssociatesRAIA R
Page 5 and 6: EMAEric Martin and AssociatesRAIA R
Page 13: EMA Eric Martin and Associates 2K02

House - Australian Institute of Architects

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?