Shure DFR11EQ Version 5, User Guide (English)

ENGLISHCERTIFICATIONSDFR11EQ (VERSION 5)UL Listed and cUL Listed to UL 6500 and CSA E65. Approved under the Verification provision of FCC part 15 as a Class B Digital Device.DFR11EQE (VERSION 5)Eligible to bear CE marking. Conforms to European Union Low Voltage Directive 2006/95/EC; VDE GS-Certified to EN 60065.Conforms to European EMC Directive 89/336/EEC. Meets applicable tests and performance criteria in European Standard EN55103 (1996) Parts1 and 2, for residential (E1) and light industrial (E2) environments.NOTE:*EMC conformance testing is based on the use of supplied and recommended cable types. The use of other cable types may degradeEMC performance.*Under extremely abnormal conditions of electrical fast transients on the power line, communication may be interrupted between theDFR11EQ and the controlling PC. The unit will not be damaged; normal operation will resume after the CONNECT button or command isused to restore the connection*This Class B digital apparatus complies with Canadian ICES-003INFORMATION TO USERChanges or modifications not expressly approved by Shure Incorporated could void your authority to operate this equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radioor television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by oneor more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help! IMPORTANT SAFETY INSTRUCTIONS !1. READ these instructions.2. KEEP these instructions.3. HEED all warnings.4. FOLLOW all instructions.5. DO NOT use this apparatus near water.6. CLEAN ONLY with dry cloth.7. DO NOT block any ventilation openings. Install in accordance with the manufacturer'sinstructions.8. DO NOT install near any heat sources such as radiators, heat registers, stoves,or other apparatus (including amplifiers) that produce heat.9. DO NOT defeat the safety purpose of the polarized or grounding-type plug. Apolarized plug has two blades with one wider than the other. A grounding typeplug has two blades and a third grounding prong. The wider blade or the thirdprong are provided for your safety. If the provided plug does not fit into your outlet,consult an electrician for replacement of the obsolete outlet.10. PROTECT the power cord from being walked on or pinched, particularly at plugs,convenience receptacles, and the point where they exit from the apparatus.11. ONLY USE attachments/accessories specified by the manufacturer.12.USE only with a cart, stand, tripod, bracket, or tablespecified by the manufacturer, or sold with theapparatus. When a cart is used, use caution whenmoving the cart/apparatus combination to avoidinjury from tip-over.13. UNPLUG this apparatus during lightning storms or when unused for long periods oftime.14. REFER all servicing to qualified service personnel. Servicing is required when theapparatus has been damaged in any way, such as power-supply cord or plug is damaged,liquid has been spilled or objects have fallen into the apparatus, the apparatushas been exposed to rain or moisture, does not operate normally, or has beendropped.15. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filledwith liquids, such as vases, on the apparatus.16. The MAINS plug or an appliance coupler shall remain readily operable.17. The airborne noise of the apparatus does not exceed 70dB (A).18. Apparatus with CLASS I construction shall be connected to a MAINS socket outletwith a protective earthing connection.19. To reduce the risk of fire or electric shock, do not expose this apparatus to rain ormoisture.20. Do not attempt to modify this product. Doing so could result in personal injuryand/or product failure.This symbol indicates that dangerous voltage constituting arisk of electric shock is present within this unit.This symbol indicates that there are important operating andmaintenance instructions in the literature accompanying this unit.WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel. Thesafety certifications do not apply when the operating voltage is changed from the factory setting.10