MSDS AMBERCLENS Aerosol - Arco

MSDS AMBERCLENS Aerosol(* Explanation risk-phrases : see chapter 16)4. FIRST AID MEASURES5. FIRE-FIGHTING MEASURESGeneral Advice :Contact with eyes :Contact with skin :Inhalation :Ingestion :The usual precautions for handling chemicals should be observedIf any symptoms should occur, seek medical advice.If substance has got into eyes, immediately wash out with plenty of waterWash with water and soap.Fresh air, keep warm and at rest.Ingestion is unlikely to occurIf swallowed accidentally, do not induce vomiting and seek medical advice.Flash point (without propellant): 12 °CExplosion limits : upper limit : 15 %lower limit : 0.6 %Extinguishing media :foam, carbon dioxide or dry agentFire-fighting procedures :Keep container(s) exposed to fire cool, by spraying with waterUnusual exposure hazard : Aerosols may explode if heated above 50°C6. ACCIDENTAL RELEASE MEASURES7. HANDLING AND STORAGEPersonal precautions :Environmental precautions :Cleaning methods :Shut off all ignition sourcesEnsure adequate ventilationDo not allow to enter public sewers and watercoursesIf polluted water reaches drainage systems or water courses, immediately inform appropriate authoritiesAbsorb spillage in suitable inert materialHandling procedures :Storage procedures :8. EXPOSURE CONTROL AND PERSONAL PROTECTIONUse only in well ventilated areasDo not pierce or burn aerosols, even after use.Do not spray on a naked flame or incandescent material.Do not breathe aerosols or vapours.Avoid contact with skin and eyes.Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50°C.Keep in a cool, dry, well ventilated placeKeep out of reach of children.Control procedures :Personal protection :inhalation :hands and skin :eyes :Exposure limits :Ensure adequate ventilationKeep away from heat and sources of ignitionIt is advisable to take precautions to avoid contact with skin and eyes when handling the product.Use only in well ventilated areasIn case of insufficient ventilation, wear suitable respiratory equipment.Wear suitable protective gloves(nitrile)Wear safety goggles.Hazardous ingredient CAS-nr methodEU established exposure limits:1-methoxy-2-propanol; monopropylene glycol methyl ether 107-98-2 TWA 100 ppmSTEL150 ppm9. PHYSICAL AND CHEMICAL PROPERTIES (for aerosols without propellant)http://www.ambersil.co.uk/wwwcrc/msds/UK10001-3.htm (2 of 4) [11/05/2010 16:45:10]Apperance : physical state :Liquid under pressurecolour :colourless to yellowodour :Characteristic odourBoiling point/range : 82 °CRelative density :0.962 g/cm3 (@ 20°C)

MSDS AMBERCLENS AerosolpH : 10Vapour pressure :not availableRelative vapour density :not availableSolubility in water :Soluble in waterFlash point : 12 °CAuto-ignition : 225 °CViscosity :not availableEvaporation rate :not available10. STABILITY AND REACTIVITYConditions to be avoided :Materials to be avoided :Hazardous decomposition compounds :Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50°C.Keep away from heat and sources of ignitionNo hazardous reactions known if used for its intended purposeStrong oxidising agentcarbon oxides11. TOXICOLOGICAL INFORMATIONInhalation :Ingestion :Skin contact :Eye contact :Other information:Inhalation of solvent vapours may give rise to nausea, headaches and dizzinessIngestion is unlikely to occurAfter vomiting of swallowed product aspiration into lungs is likely. Solvents may induce chemical pneumonia.Prolonged skin contact will result in defatting of the skinIrritating to eyesNo experimental data available12. ECOLOGICAL INFORMATION13. WASTE DISPOSAL14. TRANSPORTOther adverse effects :National regulations :Do not allow to enter public sewers and watercoursesNo experimental data availableDisposal should be in accordance with local, state or national legislationUN-number : 1950Road/Rail - ADR/RID : UN1950 Aerosols Class : 2, PG : NA, Class code : 5F, Label : 2.1Sea - IMDG : UN1950 Aerosols Ltd Qty Class : 2.1, PG : NA, Label : 2.1Air - IATA/ICAO :EmSF-D,S-UUN1950 Aerosols, flammable Class : 2.1, PG : NA, Label : RFGPacking instr. LQ Y203PAX 203CAO 20315. REGULATORY INFORMATIONWarning symbol(s) : F+Risk-phrase(s) :R12: Extremely flammable.Safety-phrase(s) :S2: Keep out of the reach of children.S16: Keep away from sources of ignition - No smoking.S51: Use only in well-ventilated areas.Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierceor burn, even after use. Do not spray on a naked flame or any incandescent material.Regulation (EC) No 648/2004 on detergents: aliphatic hydrocarbons 5 - 15 %anionic surfactants < 5 %non-ionic surfactants < 5 %perfumes.benzyl alcohol, limonene16. OTHER INFORMATIONhttp://www.ambersil.co.uk/wwwcrc/msds/UK10001-3.htm (3 of 4) [11/05/2010 16:45:10]

MSDS AMBERCLENS AerosolThis product should be stored, handled and used in accordance with good industrial hygiene practices andin conformity with any legal regulation.The information contained herewith is based on the present state of our knowledge and is intended to describeour products from the point of view of safety requirements. It does not guarantee any specific properties.Apart from any fair dealing for purposes of study, research and review of health, safety and environmentalrisks, no part of these documents may be reproduced by any process without written permission from CRC.REVISIONS IN CHAPTRE : 8,9*Explanation risk-phrases:R10: Flammable.R11: Highly flammable.R12: Extremely flammable.R36: Irritating to eyes.R41: Risk of serious damage to eyes.R65: Harmful: may cause lung damage if swallowed.R66: Repeated exposure may cause skin dryness or cracking.R67: Vapours may cause drowsiness and dizziness.This Material Safety Data Sheet may already have been revised at this moment for reason such as legislation, availability of components and newlyacquired experiences. The latest and only valid version of this Material Safety Data Sheet will be sent to you upon simple request or can be found onour website : www.crcind.com. We recommend you to register on this website for this product so you will be able to receive any future updatedversion automatically.http://www.ambersil.co.uk/wwwcrc/msds/UK10001-3.htm (4 of 4) [11/05/2010 16:45:10]