Smoke ventilation according to EN 12101-2 - D+H Mechatronic
Smoke ventilation according to EN 12101-2 - D+H Mechatronic Smoke ventilation according to EN 12101-2 - D+H Mechatronic
1.2. Installation positions for drives on windows in the skylight areaAll diagrams are from the interior:NSHEV in skylightsType of openingOpening directionDriveOutwardTurn hingeBottom hung ventAngle of installation 25-60°Side opposite to the hingesOne driveSide opposite to the hingesTwo or more drivesSide mountedTwo drivesSide opposite to the hingesTwo drivesDual single flapAngle of installation 0-30°Side opposite to the hingesFour or more drivesSide mountedFour drivesWith all possibleinstallation positions in gable roofThe specific installation options for D+H drives for any profile system are listed in the D+H Euro-SHEV systemmodule.42Section C
2 D+H bracket setsD+H Mechatronic AG provides the right bracket sets for each drive for the different types of installation on differentprofile systems. The bracket sets include sash brackets and frame brackets. The choice of bracket setsdepends on the application.Suitable bracket sets for the drive series are available on the product pages online.The bracket sets are listed in the sales information.D+H Mechatronic AG also provides system-specific bracket sets (see the D+H Euro-SHEV system modules as well).Section C43
- Page 3: IntroductionSince September 2006, a
- Page 6 and 7: Table of ContentsIntroduction .....
- Page 10 and 11: 1 The EN 12101 series of standards
- Page 12 and 13: 1.1.1. Facade exhaust system (verti
- Page 14 and 15: 1.2.3. Dual single flap when instal
- Page 16 and 17: 1.4. Determining the aerodynamic fr
- Page 18 and 19: As these two options are not really
- Page 20 and 21: 2.1.4. Testing the wind load WLThe
- Page 22 and 23: clEAr GEoMEtrIc ArEAA v= clear widt
- Page 25 and 26: 2.2. Initial inspection of factory
- Page 27 and 28: 2.4. Marking an NSHEV in accordance
- Page 29 and 30: 2.5. Declaration of ConformityIn th
- Page 31 and 32: Federal StateSmoke ventilationwhen?
- Page 33 and 34: BCalculation aidsThis section is di
- Page 35 and 36: In this sample calculation, an open
- Page 37 and 38: 2.3.2. dEtErMInInG tHE WIdtH/HEIGHt
- Page 39 and 40: CInformation about D+H drives and b
- Page 41: NSHEV in the vertical facadeType of
- Page 45 and 46: ETerms and abbreviations1 Explanati
- Page 47 and 48: Aspect ratioRatio of length to widt
- Page 49: Symbol/abbreviationParameter / desc
2 <strong>D+H</strong> bracket sets<strong>D+H</strong> <strong>Mechatronic</strong> AG provides the right bracket sets for each drive for the different types of installation on differentprofile systems. The bracket sets include sash brackets and frame brackets. The choice of bracket setsdepends on the application.Suitable bracket sets for the drive series are available on the product pages online.The bracket sets are listed in the sales information.<strong>D+H</strong> <strong>Mechatronic</strong> AG also provides system-specific bracket sets (see the <strong>D+H</strong> Euro-SHEV system modules as well).Section C43