Smoke ventilation according to EN 12101-2 - D+H Mechatronic

More documents

Recommendations

Info

Example EC certificate of conformity:1. CPD No.2. Type3. Certified company1. The CPD number consists of the first four numbers identifying the notified test centre. In this example, 0786stands for the VdS test centre. The first four digits are followed by the three characters CPD (ConstructionProducts Directive) and the identification number of the certified company. In this example, the sequential number50075 stands for D+H Mechatronic AG.2. The designation “RES…” indicates for what type of smoke and heat exhaust ventilators an EC certificate ofconformity has been issued. Our example is the roof exhaust system, i.e. a roof NSHEV. Type “FES...” stands forfacade exhaust system. Further type specifications are provided in Attachment 1 of the EC certificate of conformity.3. The certified company with full address is named here. The certified company is the distributor of the NSHEV;the certified company is monitored by a notified centre and is responsible for the conformity of the NSHEV withDIN EN 12101-2.26Section A
2.4. Marking an NSHEV in accordance with EN 12101-2EN 12101-2 defines what information the CE type plate must contain. In addition to the manufacturer informationand the number of the EC certificate of conformity, this includes the performance classes confirmed duringinitial type testing. You can obtain the CE type plate from your responsible D+H partner (see page 8).The following is a general example of a CE type plate:Dimensions of the CE label Width: 104 mm Height: 20 mm2.4.1. Description of the CE type plateThe individual entries in the first line of the type plate:1 2 3 4 5 6 71: FES Vertical facade (field of application)2: XX Profile manufacturer (must be entered)3: W CCasement width: 2,500 mm4: H CCasement height: 1,600 mm5: 45 Opening angle in degrees6: KA Drive type (in this case chain drive)7: 24 V Power supplySection A27
Page 3: IntroductionSince September 2006, a
Page 6 and 7: Table of ContentsIntroduction .....
Page 10 and 11: 1 The EN 12101 series of standards
Page 12 and 13: 1.1.1. Facade exhaust system (verti
Page 14 and 15: 1.2.3. Dual single flap when instal
Page 16 and 17: 1.4. Determining the aerodynamic fr
Page 18 and 19: As these two options are not really
Page 20 and 21: 2.1.4. Testing the wind load WLThe
Page 22 and 23: clEAr GEoMEtrIc ArEAA v= clear widt
Page 25: 2.2. Initial inspection of factory
Page 29 and 30: 2.5. Declaration of ConformityIn th
Page 31 and 32: Federal StateSmoke ventilationwhen?
Page 33 and 34: BCalculation aidsThis section is di
Page 35 and 36: In this sample calculation, an open
Page 37 and 38: 2.3.2. dEtErMInInG tHE WIdtH/HEIGHt
Page 39 and 40: CInformation about D+H drives and b
Page 41 and 42: NSHEV in the vertical facadeType of
Page 43 and 44: 2 D+H bracket setsD+H Mechatronic A
Page 45 and 46: ETerms and abbreviations1 Explanati
Page 47 and 48: Aspect ratioRatio of length to widt
Page 49: Symbol/abbreviationParameter / desc

Smoke ventilation according to EN 12101-2 - D+H Mechatronic

Create successful ePaper yourself

Delete template?

Save as template?