Smoke ventilation according to EN 12101-2 - D+H Mechatronic

2.2. Initial inspection of factory production control and the quality planThe NSHEV manufacturer must establish factory production control to ensure that the NSHEV brought into circulationexhibits the specified performance classes. This is tested by the notified test centre.The factory production control must include processes and procedures to verify the manufacture of the NSHEV insuitable production steps. The production machines and the measuring and testing equipment are also examined.The manufacturer must also create a product-specific quality plan that defines the frequency with which tests areperformed on the NSHEV components or on the finished NSHEV.2.3. The EC certificate of conformityAfter all tests have been completed, the NSHEV distributor receives the EC certificate of conformity and is therebyauthorised to mark the NSHEVs accordingly. The second and third pages of the certificate contain the productand classification characteristics.Section A25