Smoke ventilation according to EN 12101-2 - D+H Mechatronic

More documents

Recommendations

Info

1 The EN 12101 series of standards using the example ofGermanyThe EN 12101 series of standards currently consists of ten sections, which have been adopted in German standards(EN 12101-xx) or published as technical reports (TR 12101-xx).Previous Previous ContentS futureDIN standard VdS Guideline DIN standardSmoke and heat control systems dIN EN 12101-1Part 1: Specification for smoke barriersDIN 18232-3 * Structural fire protection in industrial buildings DIN EN 12101-2Smoke and heat exhaust ventilation systemsSmoke vents, testsSmoke and heat control systems dIN EN 12101-3Part 3: Specification for poweredsmoke and heat exhaust ventilatorsSystems (kits) EN 12101-4DIN 18232-2 Smoke and heat control systems tr 12101-5Part 2: Natural smoke vent systems (NSV)dimensioning, requirements and installationdifferential pressure systems dIN EN 12101-6Smoke duct sections D dIN EN 12101-7Smoke control dampers D dIN EN 12101-8VdS 2581 VdS Guidelines for natural prEN 12101-9smoke vent systems- Electrical control devices -requirements and test methodsVdS 2593 Guidelines for natural smoke vent systems DIN EN 12101-10- Electrical power supply units -requirements and test methodsTable 1: Overview of the EN 12101 series of standards: *already withdrawnThe standards for prEN 12101-9 (control units), which are not only used in natural smoke and heat exhaustventilation systems (NSVs) but in all smoke and heat exhaust ventilation systems, do not currently have to beimplemented. The technical guidelines (Technical Reports, TR) are provided for information purposes only. EN12101-10 (power supply) is used in Europe as a test standard.10Section A
1.1. fIEldS of APPlIcAtIon for En 12101-2En 12101-2 applies to natural smoke and heat exhaust ventilators (nSHEVs). this standard specifies the requirementsand test methods for nSHEVs, both for horizontally (roof exhaust systems) and vertically (facade exhaustsystems) installed nSHEVs. dIn En 12101-2 supersedes the German predecessor standard dIn 18232-3.current version of En 12101-2Section A11
Page 3: IntroductionSince September 2006, a
Page 6 and 7: Table of ContentsIntroduction .....
Page 12 and 13: 1.1.1. Facade exhaust system (verti
Page 14 and 15: 1.2.3. Dual single flap when instal
Page 16 and 17: 1.4. Determining the aerodynamic fr
Page 18 and 19: As these two options are not really
Page 20 and 21: 2.1.4. Testing the wind load WLThe
Page 22 and 23: clEAr GEoMEtrIc ArEAA v= clear widt
Page 25 and 26: 2.2. Initial inspection of factory
Page 27 and 28: 2.4. Marking an NSHEV in accordance
Page 29 and 30: 2.5. Declaration of ConformityIn th
Page 31 and 32: Federal StateSmoke ventilationwhen?
Page 33 and 34: BCalculation aidsThis section is di
Page 35 and 36: In this sample calculation, an open
Page 37 and 38: 2.3.2. dEtErMInInG tHE WIdtH/HEIGHt
Page 39 and 40: CInformation about D+H drives and b
Page 41 and 42: NSHEV in the vertical facadeType of
Page 43 and 44: 2 D+H bracket setsD+H Mechatronic A
Page 45 and 46: ETerms and abbreviations1 Explanati
Page 47 and 48: Aspect ratioRatio of length to widt
Page 49: Symbol/abbreviationParameter / desc

Smoke ventilation according to EN 12101-2 - D+H Mechatronic

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?