TP 130 PTO - Linddana A/S
TP 130 PTO - Linddana A/S TP 130 PTO - Linddana A/S
Info from www.tpchipper.comNEWTP 130 PTOWood chipper for tractorThe characteristic of the new wood chipper is thewish to optimize on price without compromising onquality. TP 130 has one hydraulic driven feed rollerwhich is manufactured with tooth feeders madefrom wear steel which gives a strong and aggressiveinfeed when the wood is fed through the hopper anddirectly to the knives. The chips that are producedare 8 mm long and very uniform as the wood is cutat an angle of 90 degrees.In terms of safety the machine complies with currentregulations in the EU. The wood chipper isequipped with an operation bar for controlling thefeed roller. With the operation bar it is possible forthe operator to start and stop as well as reverse ofthe feed roller.Standard on TP 130 PTO• Integrated hydraulic system• Two knives• Two counter steels in Raex 400• Simple knife fitting without adjustment• One hydraulic driven feed roller• Turnable ejector spout• Wipers to avoid accumulation of material by thefeed rollers and the rotor housing• Rotor lock to secure rotor disc when changingknives• Operation bar for start/stop/reverse offeed roller• Adjustable foot in 2 positions• PTO linkage• Extensive manual with spare parts catalogue• All wearing parts can be changed with standardtoolsIntroduction priceuntil 30.06.10EURO 4.995(EXW Ølholm and ex. VAT and local taxes)TP 100 TP 130 TP 160 TP 200 TP 250 TP 230 TP 270 TP 280 TP 400
Info from www.tpchipper.comNEW<strong>TP</strong> <strong>130</strong> <strong>PTO</strong>Wood chipper for tractorThe characteristic of the new wood chipper is thewish to optimize on price without compromising onquality. <strong>TP</strong> <strong>130</strong> has one hydraulic driven feed rollerwhich is manufactured with tooth feeders madefrom wear steel which gives a strong and aggressiveinfeed when the wood is fed through the hopper anddirectly to the knives. The chips that are producedare 8 mm long and very uniform as the wood is cutat an angle of 90 degrees.In terms of safety the machine complies with currentregulations in the EU. The wood chipper isequipped with an operation bar for controlling thefeed roller. With the operation bar it is possible forthe operator to start and stop as well as reverse ofthe feed roller.Standard on <strong>TP</strong> <strong>130</strong> <strong>PTO</strong>• Integrated hydraulic system• Two knives• Two counter steels in Raex 400• Simple knife fitting without adjustment• One hydraulic driven feed roller• Turnable ejector spout• Wipers to avoid accumulation of material by thefeed rollers and the rotor housing• Rotor lock to secure rotor disc when changingknives• Operation bar for start/stop/reverse offeed roller• Adjustable foot in 2 positions• <strong>PTO</strong> linkage• Extensive manual with spare parts catalogue• All wearing parts can be changed with standardtoolsIntroduction priceuntil 30.06.10EURO 4.995(EXW Ølholm and ex. VAT and local taxes)<strong>TP</strong> 100 <strong>TP</strong> <strong>130</strong> <strong>TP</strong> 160 <strong>TP</strong> 200 <strong>TP</strong> 250 <strong>TP</strong> 230 <strong>TP</strong> 270 <strong>TP</strong> 280 <strong>TP</strong> 400
88823628642207 /683<strong>PTO</strong> 528 /403 /55812172136TECHNICAL DATAMax. wood diameterMax. opening at feed rollerOperationChipper principle<strong>130</strong> mmH x B = <strong>130</strong> x 220 mmReturn/forward/stop of feed roller through operation bar (yellow)discRotor disc - weight in kg 85Feeding angleIn feedFeed rollerNumber of knivesChip lengthCounter steelRequired powerParallel to driving direction1 hydraulic driven feed roller, spring compressed of 1 8 mm springHorizontal2 pcs.8 mm1 horizontal and 1 vertical18-45 kW (25-60 hp)<strong>PTO</strong> 540 rpm./min<strong>PTO</strong> shaft3-point linkage Kategories 1+2Chip capacityWeightWalterscheid with free wheel, length = 560 mm4-5 m 3 /hour (Experience numbers by manual operation)502 kg without <strong>PTO</strong>ACCESSORIESStress control system <strong>TP</strong> PILOTSliverbreakersGuard in rotor housingExtended ejector spoutLight barTools setMonitors the rpm on the rotor disc to protect the engine of the tratorTYPE A (with 4 fingers)Recommended if uniform chips are required500 mm vertical - 1.000 mm horizontalLight bar with a complete set of rear lightsContains tools for daily service and maintenance<strong>Linddana</strong> A/SØlholm Bygade 70 · DK-7160 TørringTlf +45 75 80 52 00 · Fax +45 75 80 54 11e-mail tp@linddana.dk · www.tp.dk
Change language