TH-D72A/E - N3UJJ

6 OPERATIONAL EXAMPLES OF APRSConfiguration Example(Insert one space after the frequency before entering Wide/ Narrow, Tone/CTCSS/ DCS and Shift/Offset.)• “446.100 MHz”: Voice frequency configured for 446.100 MHz, Wide-band FM, Tone frequency =None, Simplex• “446.100 MHz T071”: Voice frequency configured for 446.100 MHz, Wide-band FM, Tonefrequency of 71.9 Hz, Simplex• “446.100 MHz 0071”: Voice frequency configured for 446.100 MHz, Narrow-band FM, Tonefrequency of 71.9 Hz, Simplex• “446.100 MHz C100”: Voice frequency configured for 446.100 MHz, Wide-band FM, CTCSSfrequency of 100 Hz, Simplex• “446.100 MHz c100”: Voice frequency configured for 446.100 MHz, Narrow-band FM, CTCSSfrequency of 100 Hz, Simplex• “446.100 MHz D023”: Voice frequency configured for 446.100 MHz, Wide-band FM, DCS code of023, Simplex• “446.100 MHz d023”: Voice frequency configured for 446.100 MHz, Narrow-band FM, DCS codeof 023, Simplex• “446.100 MHz tOFF”: Voice frequency configured for 446.100 MHz, Narrow-band FM, Tonefrequency = None, Simplex• “146.850 MHz”: Voice frequency configured for 146.850 MHz, Wide, Tone frequency = None,Minus Shift, 600 kHz Offset (TH-D72A’s Auto Repeater Offset may work)• “444.750 MHz Toff +”: Voice frequency configured for 444.750 MHz, Wide, Tone frequency =None, Plus Shift, Offset = default on UHF band (5 MHz)• “146.850 MHz T131 -060”: Voice frequency configured for 146.850 MHz, Wide-band FM, Tonefrequency of 131.8 Hz, Minus Shift, 600 kHz offset• “444.7625 MHz tOFF +”: Voice frequency configured for 444.7625 MHz, Narrow-band FM, Tonefrequency = None, Plus Shift, Offset = default on UHF band (5 MHz)• “444.7625 MHz t131 +4 MHz”: Voice frequency configured for 444.7625 MHz, Narrow, Tone =131.8 Hz, +Shift, Offset = 5 MHz (Default offset on UHF band), “4 MHz” is not allowed and itresults in a syntax error for TM-D710A so that the default offset 5 MHz (K-type) is applied instead.Figure 6-6 QSY Information Transmission Configuration Menu48 CONTENTS TH-D72A/EFrom The N3UJJ.COM Document Library