13.07.2015 Views

TH-D72A/E - N3UJJ

TH-D72A/E - N3UJJ

TH-D72A/E - N3UJJ

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

1 DEVELOPMENT CONCEPT1.2 Evolving DevelopmentNext, we turned our sights to applied functions of GPS.Incorporating an internal GPS unit to support the collected positional information in APRSapplications is our minimum standard, and it is also very important to provide customers with appliedfunctions to enhance the convenience of the product.Following are some examples of applied functions available with the internal GPS unit.• GPS Logger Function:It features the GPS logger function to log the tracking data. The maximum of 5,000 points seemrather modest compared with a full-fledged GPS logger, but the GPS logger function on the<strong>TH</strong>-<strong>D72A</strong>/E allows setting of the interval of records in the log according to the usage environmentand therefore is very useful. A user can choose from (1) the programmed interval duration, (2) theprogrammed travel distance and (3) the timing of transmitting an APRS beacon.The recorded movement trajectory data (log) can be exported to a PC with the MCP-4A,dedicated memory control program for <strong>TH</strong>-<strong>D72A</strong>/E, installed and be saved in several file formatsincluding KML that is compatible with Google Earth.• GPS Only mode:A new mode is now added that disables all the features of the transceiver and allows only the GPSlogger to function. If you intend to only record the movement trajectory, using the mode results ina substantial reduction in battery power consumption.• Mark Waypoint and Target Point functions:While you are on a trip, a maximum of 100 points that you want to store can be stored. Therecorded points can be used as a destination (a Target Point) for navigating while verifying thedistance and azimuth until the destination.• Time adjustment function:The current time data received from a GPS satellite can be used to manually or automatically setthe clock built in the transceiver.• Display of GPS satellite information:This is a familiar function of a typical GPS receiver. The location and signal strength of eachsatellite can be viewed on the LCD screen.2 CONTENTS <strong>TH</strong>-<strong>D72A</strong>/EFrom The <strong>N3UJJ</strong>.COM Document Library

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!