PartsManager Pro User's Guide

Rearranging Information in the Job ManagerPartsManager Pro allows you to change the order in which jobs are listed and to resizeand move columns.Sorting InformationIf you develop a naming convention for jobs, you can use sorting to arrange jobs byname, making it faster and easier to locate a job. Change the order in which part entriesare listed by doing the following:Click a column header. Entries are listed in order according to the information in thatcolumn. An upward-pointing triangle appears on the right side of the header andinformation is arranged in order from first to last. That is, entries that begin with lettersare arranged in A-Z order and entries that begin with numbers are arranged in 1-9 order.If you click the column header again, a downward-pointing triangle appears on the rightside of the header and information is arranged in order from last to first. That is, entriesthat begin with letters are arranged in Z-A order and entries that begin with numbers arearranged in 9-1 order.Resizing ColumnsResize column widths by doing the following:1. Place the mouse pointer on the boundary between two column headers. The mousepointer changes to .2. Hold down the left mouse button.3. Drag to the left or right.Moving ColumnsRearrange the order in which columns appear by doing the following:1. Place the mouse pointer on a column header.2. Hold down the left mouse button and drag the header to the left.3. Stop dragging where you want to insert the column. A small green arrow indicateswhere the column will be inserted.4. Release the mouse button. The column is inserted at the arrow.22 PartsManager Pro User’s Guide 15022006-3.4