GPTWR-3 SERIES (2008 Release) - Maxon

More documents

Recommendations

Info

PLATFORM ADJUSTMENT - Continued11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-77134. Compare measurement “B” (FIG.18-1) with the distances and grindingdepths in TABLE 18-1. For example:If measurement “B” (FIG. 18-1) is 3”above bed level and you want to lowerthe outboard edge of platform to 1”above bed level, grind 1/8” from eachplatform stop (TABLE 18-1).LOWER PLATFORMEDGE (OUTBOARD)THIS DISTANCE(“B”)GRIND METALFROM PLATFORMSTOP1” 1/16”2” 1/8”3” 3/16”4” 1/4”TABLE 18-15. Grind metal from platform stops (FIG.18-2) to lower outboard edge of platformto correct position.6. Lower the platform, then raise it to bedlevel. The outboard edge of platform shouldbe level or up to 2” maximum above bedlevel (FIG. 18-3).“B”LEVEL LINEPLATFORM EDGE ABOVE BED LEVELFIG. 18-1SHACKLE(REF)GRIND THIS FACE(SEE TABLE 18-1)GRINDING PLATFORM STOPS(CURBSIDE SHOWN)FIG. 18-2OUTBOARD EDGE2” MAX (48”-53” BED HT.0” LEVEL (54”-55” BED HT.)LEVEL LINEEXTENSIONPLATE (REF)VEHICLEFLOOR (REF)EXTENSIONPLATE (REF)VEHICLEFLOOR (REF)PLATFORM EDGE ABOVE BED LEVELFIG. 18-318
PARTS BREAKDOWNMAIN ASSEMBLY (ALUMINUM PLATFORM)REFER TO EXTENSIONPLATE ASSEMBLYREFER TO MAINFRAME ASSEMBLY1REFER TO PLATFORM &FLIPOVER ASSEMBLYREFER TO HYDRAULICCOMPONENTS & PUMPCOVER & MOUNTINGPLATE ASSEMBLY211921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713ITEM QTY. PART NO. DESCRIPTION1 1 265743 CHANNEL, 3” X 4” X 67” LG. (ICC BUMPER)2 2 264209 ANGLE, 2” X 2” X 1/4” X 14” LG. (ICC BUMPER)19
Page 1: M-08-09AUGUST 2008MAINTENANCE MANUA
Page 4 and 5: TABLE OF CONTENTSWARNINGS .........
Page 6 and 7: Comply with the following WARNINGS
Page 8 and 9: 11921 Slauson Ave. Santa Fe Springs
Page 10 and 11: PERIODIC MAINTENANCEPERIODIC MAINTE
Page 12 and 13: PERIODIC MAINTENANCECHECKING HYDRAU
Page 14 and 15: PERIODIC MAINTENANCECHANGING HYDRAU
Page 16 and 17: PERIODIC MAINTENANCEREPLACING PLATF
Page 20 and 21: EXTENSION PLATE ASSEMBLY11921 Slaus
Page 22 and 23: MAIN FRAME ASSEMBLY3(2 PLACES) 5(10
Page 24 and 25: MAIN FRAME ASSEMBLY - Continued1192
Page 26 and 27: PLATFORM & FLIPOVER ASSEMBLY (ALUMI
Page 28 and 29: PLATFORM ASSEMBLY (ALUMINUM)6(2 PLA
Page 30: FLIPOVER WITH SINGLE CART STOP (ALU
Page 33 and 34: ITEM QTY. PART NO. DESCRIPTIONREF 1
Page 35 and 36: PUMP ASSEMBLY11(2 PLACES)12(2 PLACE
Page 37 and 38: CAUTIONTo prevent hydraulic lock fr
Page 39 and 40: ITEM QTY. PART NO. DESCRIPTIONREF 1
Page 41 and 42: CONTROL SWITCH AND POWER CABLENOTE:
Page 43 and 44: DECAL SHEETP/N 268454-01FIG. 43-111
Page 45 and 46: SYSTEM DIAGRAMSPUMP & MOTOR SOLENOI
Page 47 and 48: ELECTRICAL SCHEMATIC (POWER DOWN)BL
Page 49 and 50: PLATFORM WILL NOT RAISE, BUT MOTOR
Page 51 and 52: 3. Check the hydraulic cylinder. Wi
Page 53 and 54: LIFTGATE WILL NOT LIFT RATED CAPACI
Page 55 and 56: 4. Verify the pump motor is grounde
Page 57 and 58: CAUTIONKeep dirt, water and other c
Page 59 and 60: CAUTIONKeep dirt, water and other c
Page 61 and 62: PLATFORM WILL NOT TILT DOWN TO THE

GPTWR-3 SERIES (2008 Release) - Maxon

Create successful ePaper yourself

Delete template?

Save as template?