"A" Ductable Liquid Chillers with Integrated Hydronic Module
"A" Ductable Liquid Chillers with Integrated Hydronic Module
"A" Ductable Liquid Chillers with Integrated Hydronic Module
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
10.4 - Available static system pressureSingle pump3002752502252001751501253100754501 25 6 7 8 9250 2 4 6Water flow rate, l/sLegend1 30RY 0172 30RY 0213 30RY 0264 30RY 0335 30RY 0406 30RY 0507 30RY 0608 30RY 0709 30RY 080Available static pressure, kPa10.5 - Duct connectionThe 30RY 017-080 can be installed inside a building andconnected to an air ductwork system:- air heat exchanger side, i.e. at the fresh air inlet side- fan discharge side, i.e. where the air treated by the heatexchanger is discharged.Installation in a room is thus possible <strong>with</strong>out disturbing theroom temperature.10.5.1 - Air return <strong>with</strong>out accessory filterThe units are supplied <strong>with</strong> a collar that permits connection ofa return air duct.Provide a removable window on the return air duct to permitmaintenance of the air temperature sensor.Air temperaturesensor positionDual pump225200Available static pressure, kPa17515012510075Legend1 30RY 0402 30RY 0503 30RY 0604 30RY 0705 30RY 080501 2 3 4 5250 2 4 6 8Water flow rate, l/s10.5.2 - Air return <strong>with</strong> accessory filterThe suction side connection collar must first be removed.Installation of the accessory on the unit can be done as follows:Accessory filters21
Change language