Procedural Lab Template, Student Version, Required Components

CCNA ExplorationAccessing the WAN: Skills Based AssessmentStudent Skills based Assessment LabR2:R2#configure terminalR2(config)#ip route 0.0.0.0 0.0.0.0 Loopback0R2(config)#router ripR2(config-router)#version 2R2(config-router)#network 172.16.0.0R2(config-router)#no auto-summaryR2(config-router)#redistribute staticR2(config-router)#endR2#show ip protocolsR2#show ip routeR3:R3#configure terminalR3(config)#router ripR1(config-router)#version 2R3(config-router)#network 10.0.0.0R3(config-router)#network 172.16.0.0R3(config-router)#passive-interface fastEthernet0/1R3(config-router)#no auto-summaryR3(config-router)#endR3#show ip protocolsR3#show ip routeTask 6: Configure Basic Router SecurityStep 1: Enable a secure Telnet login using a local database on R2.Step 2: Disable unused services and interfaces on R2.Step 3: Confirm that R2 is secured.R2:R2#configure terminalR2(config)#username cisco password ciscoR2(config)#aaa new-modelR2(config)#aaa authentication login LOCAL_AUTH localR2(config)#line vty 0 4R2(config-line)#login authentication LOCAL_AUTHR2(config)#no service padR2(config)#no service fingerR2(config)#no service udp-small-serverR2(config)#no service tcp-small-serverR2(config)#no ip bootp serverR2(config)#no ip http serverR2(config)#no ip fingerR2(config)#no ip source-routeR2(config)#no ip gratuitous-arpsAll contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 7 of 9