User Manual - Polaris S.p.A.
User Manual - Polaris S.p.A. User Manual - Polaris S.p.A.
Adjustment instructions4.11.2004 Rev. 1.16. Adjustment instructions6.1 Thermostat operation6.1.1 KeyboardPic. 6.1.1 - Thermostat ID 974 (BT, BTV)Arrow UP key (P1): Scrolls through the menu items; increases values, starts manual defrost.Arrow DOWN key (P2): Scrolls through the menu items; decreases values.FNC (P3): Exit function.SET (P4): Accesses the setpoint; accesses the menus; confirms commands.6.1.2 DisplaySymbols on the front panelLED L1 signals an alarm; blinking means that the alarm is in silent mode.LED L2 indicates that a defrost cycle is in progress; blinking means that a manual defrostcycle is in progress.LED L3 indicates that the compressor is on; blinking means that a delay time, a safety delaytime or a compressor shutdown is in progress.LED L4 (ID 974 only) indicates that the fan is on.14
Adjustment instructions4.11.2004 Rev. 1.16.1.3 Setting the SETPOINT1. To access the "Machine status" menu, press and immediately release the SET key.The label of the "Set" folder will appear;2. To display it, press SET again. The SETPOINT value will appear on the display.3. To change the SETPOINT value, use the arrow up and down keys within 15 seconds.6.1.4 Starting a manual defrostTo start a manual defrost cycle, press and hold down the arrow up key (P1) for 5 seconds.If the conditions required to start a defrost are not met (for example, evaporator sensortemperature is higher than defrost end temperature), the display will blink three times towarn the user that the operation will not be carried out.15
- Page 1: FREEZERSA Plus serieBTBTVTYPE: 70,
- Page 4 and 5: 4.11.2004 Rev. 1.1
- Page 6 and 7: 4.11.2004 Rev.5.7.3 Suggestions ...
- Page 8 and 9: General information4.11.2004 Rev. 1
- Page 10 and 11: Safety4.11.2004 Rev. 1.12.2.1 Insta
- Page 12 and 13: Functional description4.11.2004 Rev
- Page 14 and 15: Operating instructions4.11.2004 Rev
- Page 16 and 17: Operating instructions4.11.2004 Rev
- Page 18 and 19: Installation4.11.2004 Rev. 1.15.3 U
- Page 22 and 23: Adjustment instructions4.11.2004 Re
- Page 24 and 25: Adjustment instructions4.11.2004 Re
- Page 26 and 27: Adjustment instructions4.11.2004 Re
- Page 28 and 29: Adjustment instructions4.11.2004 Re
- Page 30 and 31: Troubleshooting4.11.2004 Rev. 1.124
- Page 32 and 33: Spare parts4.11.2004 Rev. 1.126
- Page 34 and 35: Spare parts4.11.2004 Rev. 1.128
- Page 36 and 37: Spare parts4.11.2004 Rev. 1.130
- Page 38 and 39: Spare parts4.11.2004 Rev. 1.132
- Page 40 and 41: Spare parts4.11.2004 Rev. 1.134
- Page 42 and 43: Spare parts4.11.2004 Rev. 1.136
- Page 44 and 45: Technical specifications4.11.2004 R
- Page 46 and 47: Wiring diagram BT, BTV
- Page 48 and 49: Technical specifications4.11.2004 R
- Page 50 and 51: Technical specifications4.11.2004 R
- Page 52 and 53: Technical specifications4.11.2004 R
- Page 54 and 55: Technical specifications4.11.2004 R
- Page 56 and 57: DICHIARAZIONE DI CONFORMITA’DECLA
- Page 60: M_SPABT_uen11.pdf
Adjustment instructions4.11.2004 Rev. 1.16. Adjustment instructions6.1 Thermostat operation6.1.1 KeyboardPic. 6.1.1 - Thermostat ID 974 (BT, BTV)Arrow UP key (P1): Scrolls through the menu items; increases values, starts manual defrost.Arrow DOWN key (P2): Scrolls through the menu items; decreases values.FNC (P3): Exit function.SET (P4): Accesses the setpoint; accesses the menus; confirms commands.6.1.2 DisplaySymbols on the front panelLED L1 signals an alarm; blinking means that the alarm is in silent mode.LED L2 indicates that a defrost cycle is in progress; blinking means that a manual defrostcycle is in progress.LED L3 indicates that the compressor is on; blinking means that a delay time, a safety delaytime or a compressor shutdown is in progress.LED L4 (ID 974 only) indicates that the fan is on.14