RFID Systems - Allied Automation, Inc.

More documents

Recommendations

Info

RFID SystemsIDENT I System P Read Heads and BasesIDENT I System PRead Head andBases• Single read head solution 1 head,1 base, 1 network connection• 4” of read range• Choose PROFIBUS, RS-232, RS-485or INTERBUS• DIP switch addressable• Reads and writes any lowfrequency IPC tagIDENT I System P Read HeadThe choices are simple here. One read head is usedwith a number of base options including RS-232, RS-485, PROFIBUS, and INTERBUS. The read head willcommunicate to all low-frequency IPC… type tags. Thereare three LEDs that help to diagnose and troubleshoot thesystem. The first is power, the second is the read/writesuccess and the last one is for bus error. If the INTERBUSor PROFIBUS connections are not made the Bus Err LEDwill be solid RED.IDENT I System P BasesThe IDENT I System P Bases contain all electricalconnections for the read head as well as any DIP switchsetting. There are two versions of the base. There is theshort version for RS-232/RS-485 and the long version forPROFIBUS and INTERBUS. There are also stainless steelversions that are perfect for the food industry.Mounting hardwareIf the read heads are installed in a rigid bracket, it isimpossible to make adjustments. P+F offers RAMmounting hardware that makes it easy to adjust thereaders. The distance between the tag and head may needto change depending on the mounting of the tag and thespeed at which the tag passes the head.RS-232/RS-485 point-to-pointPoint-to-point models are designed to connect a singlehead to a single serial port. That port can be RS-232 orRS-485. The P+F protocol is easy to use. You send acommand and you get a response when the command isexecuted. Many commands are available to the user. Also,the read head can run automatically on power up and senddata as the tags arrive in front of the read head.RS-485 multidropThe multidrop bases are ideal for connecting many headsto a single serial port. The bases are addressable 1-30, andup to 30 read heads can be connected to a single cable.RS-485 can be run up to 2000 feet with no communicationloss. This protocol is ideal for PC applications and alsoconnects to our DeviceNet bus coupler. For DeviceNet,however, only a single head at address 1 is supported oneach port.PROFIBUSTo connect multiple heads to a single cable this is probablythe simplest and fastest hardware to use. You can hardwirethe PROFIBUS cable or use the single quick disconnectoption. If using a quick disconnect, a single head can beremoved without taking down the entire network. Over 100heads can be attached to a single network.INTERBUSThis is one of the few INTERBUS options that P+F offers.This base was recently redesigned to incorporate the baudrate selection switch so that 500 kbit/s and2 Mbit/s are now both supported. The quick disconnectoption now makes installation even easier. The realadvantage of INTERBUS is its almost limitless cable length.There can be up to 512 participants on the bus and theINTERBUS cable can be up to 12.8 kilometers with up to400 meters between any two devices.60Pepperl+Fuchs®Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.comTelephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
RFID SystemsIDENT I System PRead HeadHOUSING STYLEExtended Flat PackMODELIPT1-FPFREQUENCY125 kHzLED FUNCTIONALITYGreen power, amber tag read, red bus errorMOUNTINGMin. distancebetween two heads1500 mmOPERATING VOLTAGE20-30 VDC from baseTEMPERATURE Working -13ºF to +158ºF (-25ºC to +70ºC)RANGE Storage -40ºF to +185ºF (-40ºC to +85ºC)PROTECTION (IEC)IP67 (with base attached)HOUSING MATERIALPBTWEIGHT12 ozAPPROVALSELECTRICAL CONNECTIONDirectly to baseDimensions (mm)IPT1-FP20 29IDENT I System P BasesINDUSTRIAL NETWORK RS-232/RS-485 RS-485 Multidrop PROFIBUS INTERBUSMODEL(S) Standard U-P4-RX U-P4-R4 U-P6-B6 U-P6-B5Metric Threads (M20) U-P3-RX U-P3-R4 – –Stainless Steel (M20) U-P3V4A-RX U-P3V4A-R4 U-P6V4A-B6 –Quick Disconnect – U-P4-R4-V15 U-P6-B6-V15B U-P6-B5-VOPERATING VOLTAGE20-30 VDCVOLTAGE RIPPLE≤ 10% at 30 VDCPOWER CONSUMPTION 4 W (with read head) 5 W (with read head)REVERSE POLARITY PROTECTIONYesNETWORK PROTOCOLS P+F ASCII P+F ASCII multidrop PROFIBUS DP INTERBUSBAUD RATES up to 38.4 kbps up to 38.4 kbps up to 12 Mbps 500 kbps, 2 MbpsADDRESS None, point-to-point 0 (point-to-point), 1-31 addressable 0-126 512 addressesREAD HEAD MAPPING – – mixed mixedMIN/MAX DATA MAPPING SIZES – – 8 bytes/32 bytes 10 bytesMAXIMUM READ/WRITE DATA IN SINGLE SCAN1020 bytes 28 bytes 4 bytesMESSAGING – – DPV0 remote bus stationMAX. NETWORK CABLE LENGTH RS-232 100 m, RS-485 1200 m 1200 m 1200 m 12800 mPROTECTION (IEC)IP67 (with read head attached)HUMIDITY96% noncondensing, salt spray resistantTEMPERATURE Working -13ºF to +158ºF (-25ºC to +70ºC)RANGE Storage -40ºF to +185ºF (-40ºC to +85ºC)HOUSING MATERIAL Aluminum or stainless steel AluminumWEIGHT 7 oz 7 oz 27 oz 27 ozAPPROVALS65806580IDENT I System P Read Heads and BasesREAD HEAD CONNECTIONDirect read head connectionPOWER AND BUS Conduit/cordCONNECTIONS grip versions Terminals Terminals Terminals TerminalsQuick5-pin male M12 B-coded quick5-pin male M122 - male M23disconnect–disconnect + 4-pin male M12versionsquick disconnectquick disconnectsquick disconnect for powerPepperl+Fuchs®Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.comTelephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com61
Page 2 and 3:
SPOTLIGHT on RFIDIDENT ControlRFID
Page 4 and 5:
Factory automation -sensing your ne
Page 7 and 8:
FDA Clears Way for RFID TaggingThe
Page 9 and 10:
RFID SystemsRFID Systems Selection
Page 11 and 12:
IDENT Control Series QSeries QThis
Page 13 and 14: Tagsfor mounting .on metalCT 54 58S
Page 15 and 16: IDENT Control Series MVTagsfor moun
Page 17 and 18: PROFIBUSINTERBUSNetworkAdaptersEthe
Page 19 and 20: MARKETS AND APPLICATIONSRFID for th
Page 21 and 22: RFID SystemsFundamentals of RFIDWha
Page 23 and 24: RFID SystemsFundamentals of RFIDTra
Page 26 and 27: RFID SystemsNotesPepperl+Fuchs®Inc
Page 29 and 30: RFID SystemsRead Head And TriggerCo
Page 31 and 32: RFID SystemsNotesIDENT ControlPeppe
Page 33 and 34: RFID SystemsRS-232MODEL IC-KP-B12-V
Page 35 and 36: RFID SystemsAccessoriesRS-232 Acces
Page 37 and 38: RFID SystemsSeries Q Read HeadsHOUS
Page 39 and 40: RFID SystemsSeries Q TagsTYPERead/W
Page 41 and 42: RFID SystemsNotesIDENT Control Seri
Page 43 and 44: RFID SystemsSeries P Read HeadsHOUS
Page 45 and 46: RFID SystemsSeries P TagsTYPERead O
Page 47 and 48: RFID SystemsSeries P TagsTYPERead/W
Page 51 and 52: RFID SystemsAccessoriesMounting Bra
Page 53 and 54: RFID SystemsSeries S Read HeadsHOUS
Page 55: RFID SystemsSeries S TagsTYPERead O
Page 58 and 59: RFID SystemsIDENT Control Series SS
Page 60 and 61: RFID SystemsIDENT Control Series MV
Page 62 and 63: RFID SystemsAccessoriesIDENT Contro
Page 66 and 67: RFID SystemsWiring DiagramsIDENT I
Page 68 and 69: RFID SystemsDimensions (mm)U-P6-B6-
Page 70 and 71: RFID SystemsIDENT I System P Networ
Page 72 and 73: RFID SystemsDimensions (mm)RTS 4P D
Page 74 and 75: RFID SystemsIDENT I System P TagsID
Page 82 and 83: RFID SystemsHandheld SolutionsIDENT
Page 84 and 85: RFID SystemsTagsHandheld SolutionsS
Page 86 and 87: RFID SystemsAccessoriesHandheld Sol
Page 88 and 89: RFID AccessoriesPower CablesThese c
Page 90 and 91: RFID AccessoriesRead Head Cables fo
Page 92 and 93: RFID AccessoriesEthernet Accessorie
Page 94 and 95: RFID AccessoriesPROFIBUS Accessorie
Page 96 and 97: RFID AccessoriesPROFIBUS Accessorie
Page 98 and 99: RFID AccessoriesTag AccessoriesProt
Page 100 and 101: RFID AccessoriesHandheld Accessorie
Page 102 and 103: Handheld/Portable ImagersHandheldIm
Page 104 and 105: Fixed-Mount ImagersFixed-MountImage
Page 106: MARKETS AND APPLICATIONSBarcode Ima
Page 109 and 110: Barcode Imaging SystemsFundamentals
Page 111 and 112: Barcode Imaging SystemsFundamentals
Page 113 and 114: OverviewThe MAH200 and MAH300 are a
Page 115 and 116:
Barcode Imaging SystemsMODEL ODT-HH
Page 117 and 118:
Barcode Imaging SystemsAdditional I
Page 119 and 120:
Fixed-MountImagersOverview.........
Page 121 and 122:
Barcode Imaging SystemsMODELODT-MAC
Page 123 and 124:
Barcode Imaging SystemsDimensions (
Page 125 and 126:
Barcode Imaging SystemsMAC340/MAC34
Page 127 and 128:
Barcode Imaging SystemsODT-MAC344,
Page 129 and 130:
Barcode Imaging SystemsAccessoriesC
Page 131 and 132:
Barcode Imaging SystemsIDENT I Syst
Page 133 and 134:
Barcode Imaging SystemsDimensions (
Page 135 and 136:
BarcodeImagingAccessoriesHandheld A
Page 137 and 138:
Bluetooth ModemThe Bluetooth modem
Page 139 and 140:
Power SupplyFor the MAC333, MAC340
Page 141 and 142:
AppendixConversion Tables..........
Page 143 and 144:
AppendixConversion TablesMillimeter
Page 145 and 146:
AppendixIP RatingsDefinition:The fi
Page 147 and 148:
Model Number IndexAAB-18...........
show all

RFID Systems - Allied Automation, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?