RFID Systems - Allied Automation, Inc.
RFID Systems - Allied Automation, Inc.
RFID Systems - Allied Automation, Inc.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
OverviewIDENT I System P is a single read head solution withcommon industrial protocol connections. The universalread head connects directly to the base of your choice.Ethernet and DeviceNet adapters are also available toconnect to your network.Food IndustrySpecial bases for RS-232, RS-485 and PROFIBUS areavailable for the food industry. These bases are machinedout of a solid block of stainless steel and will hold up underthe harshest of conditions.Networking OptionsIDENT I System P can be connected to industrial protocolslike DeviceNet, PROFIBUS, INTERBUS, and Modbus/TCP.PC and certain PLC users may want to take advantage ofthe simple serial protocol and communicate via RS-232,RS-485 or TCP/IP.High Baud Rates for Fast Access SpeedsPROFIBUS works up to 12 Mbps, INTERBUS has beenupdated to the modern 2 Mbps specification, andRS-232/RS-485 bases will work great up to 38.4 kbps.Quick SetupAll RS-232 bases use point-to-point protocols so no setupor software is required to program the read head. RS-485,PROFIBUS and INTERBUS bases use DIP switches to settheir address. DIP Switch setup is perfect for automotiveand factory automation customers because the newsettings can be transferred even when the old hardware isdamaged and without power.125 kHz Industrial TagsIDENT I System P will read all IPC tags operating at the 125kHz frequency. Read/Write tags range from 5 bytes up to 8192bytes. Also, the read only tags carry a 5 byte unique identifierthat is guaranteed never to repeat. Tags can be embeddedin metal or surface mounted on any surface. Low costcommercial tags are also available for a variety of applications.IDENT ISystem POverview....................................................59Read Head and Bases.......................... 60-65Network Adapters................................ 66-69Tags...................................................... 70-76Mounting HardwareIf the read heads are installed in a rigid bracket, it is difficultto make adjustments. P+F offers RAM mounting hardwarethat makes it easy to adjust the readers. The distancebetween the tag and head may need to change dependingon the mounting of the tag and the speed at which the tagpasses the head.Industrial HousingsAll of the heads use a base made from high strengthindustrial aluminum or stainless steel. Grounding can easilybe achieved by bolting the base to a clean metal surface.See below for some of the other features our bases haveto offer.TerminalsConnector optionsDIP switchesP3/P4 BaseTerminalcompartmentP6 Base4 mounting holesNetwork AdaptersEvery IDENT I System P installation requires a read head,base, and optionally, a network adapter. Network adaptersfor Ethernet allow up to 16 read heads to be connected toone Ethernet cable for quick data acquisition or industrialcontrol. DeviceNet is a very common industrial protocoland all read heads andthe coupler itself arepowered off of theDeviceNetline. Thismakesinstallationeasy.IDENT I System PPepperl+Fuchs®<strong>Inc</strong>. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.comTelephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com59