RFID Systems - Allied Automation, Inc.

Barcode Imaging SystemsAdditional InformationDecode ZonesHandheld/Portable Imagers MAH200/MAH300Imager7.5 mil Data Matrix4.2 mil Code 3920.8 mil Data Matrix15.8 mil Data MatrixNear Field OptimalFocal Point 4.6”5.8 mil Code 397.5 mil Code 12820 mil PDF 417Maxicode12.5 mil UPC14.2 mil Code 12820.8 mil Code 394.0in./10.2cm0.0in./0.0cm 4.0in./10.2cm 8.0in./20.3cm 12.0in./30.5cm 16.0in./40.6cm 20.0in./50.8cmScanning in QuickConnect CodesPepperl+Fuchs makes it easy to quickly link the MAH200or MAH300 handheld imagers to Bluetooth-enableddevices. The QuickConnect Generator on our websitecreates a small Data Matrix code to be placed on aBluetooth device. When the code is scanned, the imagerwill connect with the Bluetooth device.If you received your product from us, it will already havea QuickConnect code on the product label. If you did notget your product from P+F, before we can create a codethat links your MAH200 or MAH300 to a Bluetooth device,we need to know the Bluetooth address (often referred toas the BD_ADDR) of that device. You can locate the 12-character Bluetooth address on the device near the serialnumber. It may also be located in the Bluetooth setupsection of your Pocket PC. Your name, e-mail and BD-ADDR are required to obtain a QuickConnect Code.Far Field OptimalFocal Point 10.5”Near Field Decode Zone Neutral Decode Zone4.0in./10.2cm2.0in./5.1cm0.0in./0.0cm2.0in./5.1cmFar Field Decode ZoneThe website defaults to RF Two Way communication modeand 300 dpi printing. These are the best settings andshould not be changed.http://www.am.pepperl-fuchs.com/quickconnect/code.jspAfter scanning the QuickConnect Code you may wantto make this setting permanent. To do so scan the SaveSettings symbol below.112Pepperl+Fuchs®Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.comTelephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com