S3.25 Leg Press Station - Precor
S3.25 Leg Press Station - Precor
S3.25 Leg Press Station - Precor
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>S3.25</strong> <strong>Leg</strong> <strong>Press</strong> Option Assembly Instructions3AssemblyInstructionsAssembly of the <strong>Leg</strong> <strong>Press</strong> Option takes professionalinstallers about 1 hour to complete. If this is the first timeyou have assembled this type of equipment, plan onsignificantly more time.Professional installers are highly recommended!CAUTION: Obtain assistance! Do not attemptto assemble the <strong>Leg</strong> <strong>Press</strong> Option by yourself.Because of the weight and size of the <strong>Leg</strong> <strong>Press</strong>Option, you could be injured or damage theequipment. Review the Installation Requirementson page 5 before proceeding.The <strong>Leg</strong> <strong>Press</strong> Option comes in one box. It can beinstalled on either the <strong>S3.25</strong> or S3.45 <strong>Precor</strong> StrengthTraining Equipment. Note that the location where youattach the Cross Brace to the Seat Frame differs.As you read through the assembly instructions, besure that you are using the correct mounting holes foryour unit.Be careful to assemble the components in thesequence presented in this guide.Note: As with any assembled part, proper alignment andadjustment is critical. While tightening the fasteners, besure to leave room for adjustments. Do not fully tighten thefasteners until instructed to do so.1 2 3 4 5 6Assembly Instructionspage 6