13.07.2015 Views

S3.25 Leg Press Station - Precor

S3.25 Leg Press Station - Precor

S3.25 Leg Press Station - Precor

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>S3.25</strong> <strong>Leg</strong> <strong>Press</strong> Option Assembly Instructions3. Adjust the Rubber Bumper onthe <strong>Leg</strong> <strong>Press</strong> OptionIf the Top Cap Weight still does not rest on the TopWeight, you can make one final adjustment.A. If the Cable tension still needs adjusting, push thePivot Arm up so that you can adjust the RubberBumper on the <strong>Leg</strong> <strong>Press</strong> Option.B. Rotate the Rubber Bumper up or down to tighten orloosen the Cable tension.Important: Tighten the locknut against the bracketafter you have properly adjusted the Cable tension.C. Check the weights. Move the Weight Pin to eachWeight and Selector Stem location and replace theWeight Pin in the Weight Stack.With the slack removed from the Cables, you are nowready to use the <strong>Leg</strong> <strong>Press</strong> Option. Thank you forchoosing <strong>Precor</strong> Strength-Training Equipment.Note: For maintenance instructions, refer to your <strong>S3.25</strong>Assembly and Maintenance Guide.BAAdjust theRubber BumperPush the Pivot Arm up to adjustthe Rubber BumperRubber BumperCWeight PinBracketLocknut1 2 3 4 5 6Step 3. Adjust the Rubber Bumper on the <strong>Leg</strong> <strong>Press</strong> Optionpage 18

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!