S3.25 Leg Press Station - Precor

More documents

Recommendations

Info

S3.25 Leg Press Option Assembly Instructions4 AdjustmentsAfter the Leg Press Option is assembled, you shouldcheck the Cables for proper tension. These are someobvious signs that cable problems exist:✔✔✔Excess slack exists in the Cable.The Top Cap Weight does not rest squarely on theWeight Stack.The Cable rubs the inside edges of the pulleys.Top Cap WeightTop WeightWeight PinACAUTION: Take the time to perform the followingsteps. If the Cables do not havethe proper tension, you could damage themachine and void the Precor Limited Warranty.Note: To adjust the Selector Stem, refer to theS3.25 Assembly and Maintenance Guide.1. Stretch the CableA. Sometimes a new cable must be stretched so thatthe Top Cap Weight rests on the Weight Stack. Tolengthen the Cable, insert the Weight Pin at acomfortable weight level.B. Push up on the Chest Press Arms, and then slowlylower them.C. Make sure the Top Cap Weight rests squarely onthe Weight Stack. If it does, no more adjustmentsare needed, and the Leg Press Option is ready touse. If the Top Cap Weight does not rest on the TopChest Press Arms1 2 3 4 5 6BCTop CapWeightAdjustmentspage 16
S3.25 Leg Press Option Assembly InstructionsWeight then further adjustments are needed.Continue with steps 2 and 3.2. Rotate the Cam WasherIf the Top Cap Weight does not rest on the Top Weight,you must make further adjustments.A. Remove excess tension from the Cable by placingthe Weight Pin into the Selector Stem just under theTop Cap Weight.B. To tighten or loosen the Cable tension, rotate theCam Washer.C. Look to see that Top Cap Weight rests squarely onthe Weight Stack. If it does, no more adjustments areneeded and the Leg Press Option is ready to use. Ifthe Top Cap Weight does not rest on the TopWeight, then further adjustments are needed.Continue with step 3.Top CapWeightATop WeightWeight PinBRotate theCam WasherTop CapWeightC1 2 3 4 5 6Step 2. Rotate the Cam Washerpage 17
Page 4 and 5: S3.25 Leg Press Option Assembly Ins

S3.25 Leg Press Station - Precor

Create successful ePaper yourself

Delete template?

Save as template?